VI 3000 CW - Inverter PowerWalker - Free user manual and instructions
Find the device manual for free VI 3000 CW PowerWalker in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Brand | PowerWalker |
| Model | VI 3000 CW |
| Power Rating | 3000 VA / 2700 W |
| Input Voltage | 220-240 VAC |
| Input Frequency | 50/60 Hz (auto-sensing) |
| Output Voltage | 220-240 VAC (regulated) |
| Output Waveform | Pure Sine Wave |
| Battery Type | Sealed Lead-Acid (maintenance-free) |
| Battery Capacity | 12V / 9Ah (internal, typical) |
| Typical Runtime (half load) | 10-15 minutes |
| Recharge Time | 4-6 hours to 90% |
| Output Sockets | 2-4 UPS + surge-only sockets |
| Protection Features | Overload, short circuit, deep discharge, surge protection |
| Dimensions (W x D x H) | Approx. 140 x 350 x 220 mm |
| Weight | Approx. 12 kg |
| Noise Level | < 45 dB (typical) |
| Operating Temperature | 0-40°C |
| Certifications | CE, RoHS |
| Warranty | 2 years (battery 1 year) |
Frequently Asked Questions - VI 3000 CW PowerWalker
What devices can the PowerWalker VI 3000 CW support?
The VI 3000 CW can power servers, network equipment, computers, and other sensitive electronics up to 2700 W. It provides pure sine wave output for compatibility.
How long does the battery last on the VI 3000 CW?
Battery runtime depends on load. At half load (1350 W), expect approximately 10-15 minutes. At full load (2700 W), runtime is around 3-5 minutes.
Can I replace the battery in the VI 3000 CW?
Yes, the battery is user-replaceable. PowerWalker recommends using a compatible Sealed Lead-Acid (SLA) battery of the same voltage (12V) and capacity (9Ah).
Does the VI 3000 CW have USB or software connectivity?
Many models include a USB or serial port for communication with a computer. Use PowerWalker's monitoring software for graceful shutdown during outages.
What does 'VI 3000 CW' stand for?
'VI' indicates the series (Line Interactive), '3000' is the VA rating (3000 VA), and 'CW' likely refers to a tower form factor with caster wheels for easy mobility.
Is the VI 3000 CW compatible with generators?
It should work with most generators, but ensure the generator's output is stable and within the UPS's input voltage range (220-240 VAC). Some models may require a wide input range feature.
How do I perform a self-test on the UPS?
Press and hold the test button (usually on the front panel) for 2-3 seconds. The UPS will simulate a power failure and check battery health. LEDs indicate pass/fail.
What maintenance does the VI 3000 CW require?
Keep the unit clean and ventilated. Test the battery every 3 months. Replace the battery every 2-3 years depending on usage. Check for warning lights indicating faults.
Why is the UPS beeping continuously?
Continuous beeping usually indicates a battery fault or overload. Check the battery connections, replace the battery if old, or reduce the connected load.
Can I mount the VI 3000 CW in a rack?
The CW model is typically a tower with wheels, not rackmount. Some models may have optional rack-mount kits. Verify before mounting.
User questions about VI 3000 CW PowerWalker
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual VI 3000 CW - PowerWalker and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VI 3000 CW by PowerWalker.
USER MANUAL VI 3000 CW PowerWalker
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerWalker
Model : VI 3000 CW
Category : Inverter