CL460 - Water filter Jandy - Free user manual and instructions
Find the device manual for free CL460 Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cartridge filter for swimming pool |
| Brand | Jandy |
| Model | CL460 |
| Diameter | 460 mm |
| Height | 800 mm |
| Weight | 15 kg |
| Housing material | Reinforced fiberglass |
| Cartridge type | Pleated polyester |
| Filter surface area | 4.6 m² |
| Maximum flow rate | 150 L/min |
| Maximum working pressure | 2.5 bar |
| Connection | 50 mm (2 inches) |
| Power supply | None (hydraulic operation) |
| Main functions | Swimming pool water filtration |
| Maintenance | Cleaning the cartridge with water jet |
| Safety | Automatic relief valve |
| Spare parts | Replacement cartridge available |
| Warranty | 2 years |
Frequently Asked Questions - CL460 Jandy
How to install the CL460 filter?
Place the filter on a flat and stable surface. Connect the inlet and outlet pipes according to the IN and OUT markings. Tighten the clamps. Make sure the valve is in the 'Filtration' position.
How often should the cartridge be cleaned?
It is recommended to clean the cartridge every month, or when the pressure indicates an increase of 0.5 bar compared to the initial pressure.
How to clean the cartridge?
Remove the cartridge from the housing and rinse it with a water jet. For a deep clean, use a filter cleaner and rinse thoroughly.
When to replace the cartridge?
Replace the cartridge every 1 to 2 years, or if it is damaged. The filter surface area of 4.6 m² ensures good efficiency.
What is the maximum working pressure?
The maximum working pressure is 2.5 bar. Never exceed this pressure to avoid damaging the filter.
How to winterize the filter?
Completely drain the water from the filter. Remove the cartridge and store it in a dry place. Leave the drain plug open to prevent freezing.
The filter is leaking: what to do?
Check the O-rings and the tightness of the clamp. Replace the seals if necessary. Make sure the valve is properly in position.
What is the maximum flow rate of the filter?
The maximum flow rate is 150 L/min. For optimal operation, do not exceed this flow rate.
How to bleed air from the filter?
Use the automatic relief valve located at the top of the housing. Open it until water flows without air bubbles.
Where to buy spare parts?
Spare parts, especially the replacement cartridge, are available from authorized Jandy dealers or on specialized websites.
User questions about CL460 Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water filter in PDF format for free! Find your manual CL460 - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CL460 by Jandy.
USER MANUAL CL460 Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : CL460
Category : Water filter