FS TS 906 W XS - Basket FRANKE - Free user manual and instructions
Find the device manual for free FS TS 906 W XS FRANKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Franke |
| Model | FS TS 906 W XS |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 65 - 100 cm |
| Weight | 16 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Motor power | 250 W |
| Max noise level | 65 dB(A) |
| Max airflow | 750 m³/h |
| Mounting type | Built-in telescopic |
| Exhaust type | External exhaust or recirculation |
| Number of speeds | 3 + intensive |
| Lighting | LED 2 x 3 W |
| Filter type | Washable metal filter + optional charcoal filter |
| Controls | Push buttons |
| Timer | Yes, delayed shut-off |
| Energy class | A |
| Repairability index | 8.2 / 10 |
| Warranty | 2 years |
Frequently Asked Questions - FS TS 906 W XS FRANKE
How to install the Franke FS TS 906 W XS range hood?
Installation must be carried out by a qualified professional. Make sure the exhaust duct diameter is suitable (150 mm recommended). Securely fix the hood to the wall or cabinet following the drilling dimensions indicated in the manual.
How to clean the metal filters?
The metal filters can be cleaned in the dishwasher or by hand with hot water and detergent. They must be rinsed and dried before being reinstalled. Clean them every 2 months under normal use.
How to replace the charcoal filter?
The charcoal filter is located behind the metal filter. Unclip the metal filter, then remove the old charcoal filter and insert the new one respecting the mounting direction. It should be changed every 6 to 12 months depending on use.
The hood makes an abnormal noise, what should I do?
First check that the filters are clean and properly engaged. Make sure the exhaust duct is not blocked. If the noise persists, contact Franke after-sales service for a motor diagnosis.
How to adjust the suction speed?
Use the buttons on the front panel. Press the Speed button to switch from speed 1 to 3. The intensive mode (speed 4) is activated by holding the button for 2 seconds and automatically deactivates after 5 minutes.
How to use the timer?
Press the Timer button (clock) to activate the delayed shut-off. The hood will turn off automatically after 15 minutes. You can extend the duration by pressing again.
Why does the LED lighting not turn on?
Check that the hood is powered and the fuse has not blown. If an LED bulb is defective, it must be replaced with an original Franke part. The lighting is non-dimmable.
How to switch from exhaust mode to recirculation mode?
Remove the exhaust plug and install an activated charcoal filter (not supplied). Block the external air outlet. Recirculation mode requires the hood to be in a closed circuit; the air is filtered and then returned to the room.
Where to buy spare parts for this hood?
Spare parts (filters, bulbs, motor) are available from the Franke after-sales service or on their website. Use the model reference FS TS 906 W XS to order.
What is the warranty of the Franke FS TS 906 W XS hood?
The manufacturer's warranty is 2 years from the date of purchase. It covers manufacturing and material defects. Keep the purchase receipt for any claims.
User questions about FS TS 906 W XS FRANKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual FS TS 906 W XS - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS TS 906 W XS by FRANKE.
USER MANUAL FS TS 906 W XS FRANKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRANKE
Model : FS TS 906 W XS
Category : Basket