P382XPRG101 - Pump Liberty Pumps - Free user manual and instructions
Find the device manual for free P382XPRG101 Liberty Pumps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Submersible sewage pump |
| Brand | Liberty Pumps |
| Model | P382XPRG101 |
| Dimensions (H × D) | 30 cm × 20 cm |
| Weight | 10 kg |
| Power supply | 230 V / 50 Hz / single-phase |
| Rated power | 0.5 HP (373 W) |
| Maximum flow rate | 150 L/min |
| Maximum discharge head | 8 m |
| Connection diameter | 1 1/2" (38 mm) or 2" (50 mm) |
| Liquid temperature | Up to 40 °C |
| Main functions | Pumping clear or lightly loaded water, lifting, draining |
| Noise level | approximately 65 dB(A) |
| Body material | Cast iron or stainless steel |
| Protection rating | IP68 |
| Maintenance and cleaning | Clean the strainer every 3 months, check the cable and seals |
| Safety | Use a 30 mA residual-current circuit breaker, do not run dry |
| Spare parts | O-ring, impeller, check valve, capacitor |
| Reparability | Reparable by a professional, reparability index 7.5/10 |
| Warranty | 2 years |
| Country of manufacture | United States |
Frequently Asked Questions - P382XPRG101 Liberty Pumps
What type of liquid can this pump handle?
The Liberty Pumps P382XPRG101 is designed to pump clear or lightly loaded water (rainwater, gray water). It should not be used for water containing solid or abrasive materials.
Can I use it outdoors?
Yes, because it has IP68 protection making it waterproof for temporary immersion. However, the cable and plug must be protected from the weather.
How do I install the pump correctly?
Place the pump at the bottom of the sump or cavity, ensure it is stable and connected to a 30 mA residual-current circuit breaker. Connect the outlet to the discharge pipe.
What should I do if the pump does not start?
First check the power supply and circuit breaker. Then check the float (if stuck) and the strainer (if clogged). If the problem persists, consult a professional.
What is the power of this pump?
The rated power is about 0.5 HP (373 W), allowing it to discharge up to 150 L/min with a maximum head of 8 m.
Is regular maintenance necessary?
Yes, it is recommended to clean the strainer every 3 months to prevent clogs and check the condition of the cable and seals once a year.
What accessories are included?
Generally, the pump comes with a power cable, a check valve, and sometimes a hose connector. Check the manual for the exact list.
Can I replace parts myself?
Some parts like the O-ring or impeller can be changed by a handy DIYer, but for complex repairs, it is best to call a professional.
Can the pump run continuously?
No, it is designed for intermittent operation. Do not run it dry or continuously for more than 10 minutes without a break.
Where can I find the full manual?
The original manual is available for free download on notice-facile.com in PDF format. You can also request a translation if needed.
User questions about P382XPRG101 Liberty Pumps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual P382XPRG101 - Liberty Pumps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P382XPRG101 by Liberty Pumps.
USER MANUAL P382XPRG101 Liberty Pumps
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Liberty Pumps
Model : P382XPRG101
Category : Pump