BCCS320 - Saw BLACK & DECKER - Free user manual and instructions
Find the device manual for free BCCS320 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Circular Saw |
| Brand | Black & Decker |
| Model | BCCS320 |
| Rated Voltage | 20 V MAX |
| Battery Type | Lithium-ion (Li-Ion) |
| Blade Diameter | 140 mm (5-1/2 in) |
| Max Cutting Depth | 41 mm at 90°, 25 mm at 45° |
| No-Load Speed | 3,500 rpm |
| Weight (without battery) | 2.7 kg |
| Dimensions (L x W x H) | 330 x 200 x 230 mm |
| Power Source | Cordless, interchangeable battery |
| Main Functions | Straight and bevel cuts up to 45° |
| Maintenance and Cleaning | Clean with a dry cloth, oil the blade periodically |
| Safety | Electric blade brake, two-finger trigger, spindle lock |
| Spare Parts and Repairability | Blade, batteries, charger, motor brushes available |
| General Information | 2-year warranty, compatible with 20V MAX range |
Frequently Asked Questions - BCCS320 BLACK & DECKER
How to change the blade of the BCCS320 saw?
To change the blade, first disconnect the battery. Use the spindle lock by pressing the button, then unscrew the center screw with the provided wrench. Remove the flange and blade, install the new blade respecting the rotation direction (arrow), then tighten the screw.
Which battery is compatible with the BCCS320 model?
The BCCS320 model is compatible with all Black & Decker 20V MAX lithium-ion batteries, such as LBXR20, LBXR2020, etc. Always use an original battery for optimal performance.
What is the maximum cutting depth?
The maximum cutting depth is 41 mm at 90 degrees and 25 mm at 45 degrees bevel. For a perfect cut, adjust the shoe according to the material thickness.
How to adjust the cutting angle?
Unlock the angle lever at the front of the shoe, tilt the saw to the desired angle (from 0° to 45°), then tighten the lever. Check the angle with a square if necessary.
The saw stops suddenly during use, what to do?
This may be due to a discharged battery or motor overload. Let the saw cool for a few minutes, recharge the battery, or reduce cutting pressure. If the problem persists, contact customer service.
Can the saw be used to cut metal?
The standard saw is designed for wood and derived materials. To cut metal, use a blade suitable for metal, but this is not recommended as speed and power are not optimal. Use a specific saw.
How to clean the saw after use?
Use a dry cloth or slightly damp cloth to wipe off dust. Never immerse the saw in water. Regularly clean the ventilation slots to prevent overheating. Oil the blade and spindle from time to time.
Why does the blade get stuck in the material?
This can happen if you force the cut or if the blade is dull. Check that the blade is tight and in good condition. Let the saw cut at its own pace without pushing excessively. Use a guide for straight cuts.
Where can I find spare parts for the BCCS320?
Spare parts (blades, batteries, chargers, brushes) are available on the Black & Decker website or from authorized dealers. You can also check online spare parts sites using the model number.
How to use the electric blade brake?
The blade brake is automatic: as soon as you release the trigger, the blade stops in a few seconds. This is an important safety feature. If the brake does not work, stop using the saw and have it serviced.
User questions about BCCS320 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual BCCS320 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCCS320 by BLACK & DECKER.
USER MANUAL BCCS320 BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : BCCS320
Category : Saw