BECS2245 - Saw BLACK & DECKER - Free user manual and instructions
Find the device manual for free BECS2245 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Model Number | BECS2245 |
| Brand | Black & Decker |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Amperage | 12 A |
| No-Load Speed | 5500 RPM |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inch |
| Maximum Cutting Depth at 90° | 2-1/2 inches |
| Maximum Cutting Depth at 45° | 1-3/4 inches |
| Bevel Capacity | 0° - 45° |
| Weight | 8.5 lbs |
| Length of Cord | 6 ft |
| Included Accessories | Carbide-tipped blade, blade wrench, rip fence |
| Safety Features | Electric brake, spindle lock, trigger lock-off |
| Maintenance | Keep vents clean; replace carbon brushes when needed |
| Repairability | User-serviceable parts: blade, brushes; otherwise contact service center |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - BECS2245 BLACK & DECKER
How do I change the blade on my Black & Decker BECS2245 saw?
Unplug the saw. Press the spindle lock and rotate the blade until it locks. Use the provided wrench to loosen the arbor screw (clockwise). Remove the outer flange and old blade. Install new blade with teeth facing forward, replace outer flange, and tighten arbor screw counterclockwise while holding spindle lock.
What is the maximum cutting depth of the BECS2245?
At 90° bevel, the maximum cutting depth is 2-1/2 inches (64 mm). At 45° bevel, it is 1-3/4 inches (44 mm).
How do I adjust the cutting depth?
Loosen the depth adjustment lever (usually near the base). Slide the base up or down to set the desired depth. The blade should protrude about 1/4 inch below the workpiece. Tighten the lever securely.
Can I use the saw for bevel cuts?
Yes. To adjust bevel, loosen the bevel adjustment knob. Tilt the base to the desired angle (0° to 45°). Re-tighten the knob. For accurate cuts, use a protractor or bevel gauge.
What type of blade does the BECS2245 use?
It uses a 7-1/4 inch (184 mm) blade with a 5/8 inch arbor hole. Standard blades include combination, rip, or crosscut blades. Always use blades rated for at least 5500 RPM.
Why does my saw stop suddenly?
The saw has an electric brake that stops the blade in seconds when the trigger is released. If it stops unexpectedly during use, check the power cord for damage or the circuit breaker. The saw may also have overload protection; let it cool down.
How do I clean and maintain the saw?
Unplug the saw. Remove dust from air vents with compressed air. Wipe external parts with a dry cloth. Check carbon brushes every 50 hours of use; replace if worn to less than 1/4 inch. Keep the blade clean and sharp.
What safety features does the BECS2245 have?
Key safety features include: an electric blade brake, a spindle lock for safe blade changes, a trigger lock-off to prevent accidental starting, and a lower blade guard that retracts automatically.
Where can I find replacement parts or service?
Visit Black & Decker's website or contact their customer service. Common parts like blades, brushes, and wrenches are available at home improvement stores. For repairs, check authorized service centers.
What is the warranty coverage?
The BECS2245 comes with a 2-year limited warranty covering defects in materials and workmanship. It does not cover wear parts like blades or brushes. Keep your purchase receipt.
User questions about BECS2245 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual BECS2245 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BECS2245 by BLACK & DECKER.