CWM 1500 P - Uncategorized STIEBEL ELTRON - Free user manual and instructions
Find the device manual for free CWM 1500 P STIEBEL ELTRON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric instant water heater |
| Brand | Stiebel Eltron |
| Model | CWM 1500 P |
| Rated power | 1500 W |
| Power supply | 230 V / 50 Hz |
| Dimensions (H x W x D) | 250 x 200 x 120 mm |
| Net weight | 2.5 kg |
| Max. operating pressure | 10 bar |
| Hot water flow rate | 3 L/min (at 35°C rise) |
| Temperature range | 30°C to 60°C |
| Thermostatic control | Electronic with sensor |
| Frost protection | Yes |
| Protection rating | IP24 |
| Water connection | 1/2" male |
| Housing material | ABS plastic |
| Heating element | Nickel-plated copper |
| Maintenance and cleaning | Annual descaling recommended |
| Spare parts available | Yes, from the manufacturer |
| Warranty | 2 years |
Frequently Asked Questions - CWM 1500 P STIEBEL ELTRON
How to install the CWM 1500 P?
Installation must be carried out by a qualified professional. Connect the device to the cold water supply and to the electrical supply (230 V). Observe safety distances and applicable standards.
What is the temperature of the hot water produced?
The temperature can be adjusted between 30°C and 60°C via the built-in electronic thermostat.
How to descale the device?
Use a suitable descaling agent for water heaters. Follow the manufacturer's instructions: drain, inject the product, let it act, then rinse thoroughly.
What to do if the water does not heat?
Check the electrical supply (fuse, circuit breaker). Ensure the thermostat is not set too low. If the problem persists, contact customer service.
Can I use the device without water?
No, the water heater must never be operated without water. This would damage the heating element and may cause a fire.
What is the maximum hot water flow rate?
The flow rate depends on the inlet temperature. On average, it is 3 L/min for a 35°C rise.
Is the device suitable for a shower?
Yes, for a shower the flow rate is sufficient if you use an economical shower head and the inlet temperature is not too low.
How to adjust the temperature?
Turn the adjustment knob (or keys) to set the desired temperature. An LED display may indicate the value.
What water pressure is required?
The device operates under a water pressure of 0.5 to 10 bar. Below 0.5 bar, the flow rate may be insufficient.
Does the CWM 1500 P have a frost protection function?
Yes, it is equipped with frost protection that prevents freezing below 5°C, but it must remain powered and filled with water.
User questions about CWM 1500 P STIEBEL ELTRON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CWM 1500 P - STIEBEL ELTRON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CWM 1500 P by STIEBEL ELTRON.
USER MANUAL CWM 1500 P STIEBEL ELTRON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STIEBEL ELTRON
Model : CWM 1500 P
Category : Uncategorized