402 Tribute - Speaker ELIPSON - Free user manual and instructions
Find the device manual for free 402 Tribute ELIPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Passive bookshelf speaker |
| Brand | Elipson |
| Model | 402 Tribute |
| Category | Passive speaker |
| Dimensions (W x H x D) | 300 x 200 x 250 mm |
| Weight | 5 kg |
| Frequency response | 50 Hz - 20 kHz |
| Sensitivity | 89 dB |
| Impedance | 8 ohms |
| Power handling | 100 W RMS |
| Finish | Wood veneer / lacquer |
| Speaker type | 2-way |
| Tweeter | 25 mm dome |
| Woofer | 165 mm (6.5 inches) |
| Wiring | Binding posts |
| Recommended use | Music, home cinema |
| Maintenance and cleaning | Soft dry cloth, avoid abrasive products |
| Safety | Do not expose to humidity and heat sources |
| Spare parts | Available from the manufacturer |
| Repairability | Repairability index to check |
Frequently Asked Questions - 402 Tribute ELIPSON
How to connect the Elipson 402 Tribute speaker?
Use a good quality speaker cable. Connect the red (+) and black (-) terminals of the speaker to the corresponding terminals of the amplifier. Make sure the connections are tight and polarity is respected.
What amplifier power is recommended?
An amplifier delivering between 20 and 100 W RMS per channel is ideal. Avoid under-powering the speaker to prevent damage.
Can I use these speakers for home theater?
Yes, the Elipson 402 Tribute can be used as front speakers in a home theater system. Pair them with a subwoofer for a complete experience.
How to position the speakers for better soundstage?
Place the speakers at ear level, symmetrically with respect to the listening position. Keep them at least 30 cm away from walls to avoid unwanted reflections.
Do new speakers require break-in?
A break-in period of 20 to 30 hours at moderate volume is recommended to allow the suspensions to loosen and achieve optimal performance.
How to clean the speakers?
Use a soft dry cloth. Avoid any liquid or abrasive products that could damage the finish. Regularly dust the grille with a soft brush.
What is the impedance of the speakers?
The nominal impedance is 8 ohms. Check that your amplifier supports this impedance for optimal operation.
Can I bi-wire the 402 Tribute speakers?
Yes, the speakers are equipped with terminals allowing bi-wiring or bi-amping. Remove the metal bridges between the HF and LF terminals to separate the channels.
Where to find the full manual?
The full manual is available for free download on notice-facile.com in PDF format. You can also request a translation in your language.
What to do in case of sound problem?
Check connections, polarity, and that the amplifier is not in protection mode. Test with another source. If the problem persists, contact Elipson customer service.
User questions about 402 Tribute ELIPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual 402 Tribute - ELIPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 402 Tribute by ELIPSON.
USER MANUAL 402 Tribute ELIPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELIPSON
Model : 402 Tribute
Category : Speaker