Chroma 200 - Turntable ELIPSON - Free user manual and instructions
Find the device manual for free Chroma 200 ELIPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Turntable |
| Brand | Elipson |
| Model | Chroma 200 |
| Dimensions (W x D x H) | 420 x 350 x 120 mm |
| Weight | 5 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Power consumption | 10 W |
| Speeds | 33 1/3 and 45 RPM |
| Drive | Belt drive |
| Cartridge | Moving magnet (MM) cartridge |
| Tone arm | Straight aluminum tonearm |
| Outputs | RCA (Phono) + ground cable |
| Main features | Vinyl record playback, auto-stop at end of record, adjustable anti-skating |
| Maintenance and cleaning | Clean the cartridge with a soft brush, replace the stylus after 1000 hours of use |
| Safety | Unplug the device before cleaning, do not expose to moisture |
| Spare parts and repairability | Replacement cartridge, belt, stylus available |
| General information | 2-year warranty, European manufacturing |
Frequently Asked Questions - Chroma 200 ELIPSON
How to install the Chroma 200 turntable?
Place the turntable on a stable and level surface. Remove the dust cover, install the platter (if not mounted), then put the belt in place. Connect the RCA cable and ground cable to your amplifier.
How to adjust the tracking force?
Use the counterweight at the back of the tonearm. Turn it until you reach the recommended force (usually between 1.5 and 2.5 g depending on the cartridge). Check with a stylus force gauge.
What if the sound is distorted?
Check that the stylus is not worn or dirty. Clean it with a soft brush. Ensure the tracking force and anti-skating are properly adjusted.
How to clean my vinyl records?
Use an antistatic cloth or a specific cleaning solution. Always wipe in the direction of the grooves. Avoid abrasive products.
What type of cartridge is supplied?
The Chroma 200 is equipped with a moving magnet (MM) cartridge with a conical stylus. You can replace it with an equivalent cartridge.
How to change the belt?
Remove the platter, take off the old belt, place the new one around the motor and platter. Make sure it is properly tensioned and centered.
Can I connect the turntable directly to speakers?
No, the turntable requires a phono preamp. Connect it to a phono input of an amplifier or use an external preamp.
How to adjust anti-skating?
Turn the anti-skating knob to the same value as the tracking force (in grams). This prevents sound distortion towards the inside or outside of the record.
What if the turntable does not spin?
Check that the belt is in place and not loose. Ensure the power is plugged in and the speed selector is correctly positioned.
How to change the stylus?
Gently pull the worn stylus forward. Insert the new stylus by pushing it until it clicks into place. Respect the mounting direction.
User questions about Chroma 200 ELIPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual Chroma 200 - ELIPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Chroma 200 by ELIPSON.
USER MANUAL Chroma 200 ELIPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELIPSON
Model : Chroma 200
Category : Turntable