eGPA4-150 - Receiver Ecler - Free user manual and instructions
Find the device manual for free eGPA4-150 Ecler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver / Power Amplifier |
| Brand | Ecler |
| Model | eGPA4-150 |
| Power Output | 4 x 150W RMS (4 ohms) |
| Input Impedance | 20 kOhms (balanced) |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Total Harmonic Distortion (THD) | < 0.05% |
| Signal to Noise Ratio | > 100 dB (A-weighted) |
| Input Connectors | 4 x XLR balanced, 4 x RCA unbalanced |
| Output Connectors | 4 x Speakon, 4 x binding posts |
| Power Supply | AC 230V ~ 50/60 Hz |
| Power Consumption | 1200 VA max |
| Dimensions (W x H x D) | 482 x 88 x 300 mm (19" rack, 2U) |
| Weight | 5.2 kg |
| Protection Features | Short circuit, thermal overload, DC offset, soft start |
| Cooling | Variable speed fan, front-to-back airflow |
| Controls | Front panel volume controls, power switch, status LEDs |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Safety | Class I equipment; ensure proper grounding |
| Spare Parts & Repairability | Contact authorized Ecler service centers for spare parts |
Frequently Asked Questions - eGPA4-150 Ecler
How do I connect my speakers to the eGPA4-150?
Use the Speakon connectors or binding posts on the rear panel. Ensure the impedance is 4 ohms or higher per channel.
What is the maximum power output per channel?
The amplifier delivers 150W RMS per channel into 4 ohms, or 100W RMS into 8 ohms.
Can I bridge two channels for more power?
This model does not support bridging; each channel operates independently.
What type of input cables should I use?
Use balanced XLR cables for best noise rejection, or unbalanced RCA cables for consumer sources.
Will the amplifier shut down if it gets too hot?
Yes, the eGPA4-150 has thermal overload protection. If the internal temperature exceeds safe limits, the amplifier will mute and cool down automatically.
How do I clean the front panel?
Use a soft, dry cloth to wipe the front panel. Do not use any liquids or abrasive cleaners.
Can I rack-mount the amplifier?
Yes, the eGPA4-150 is designed for 19-inch rack mounting and occupies 2U of rack space.
What does the 'Protect' LED indicate?
The Protect LED lights up when the amplifier detects a fault such as short circuit or overcurrent. Check speaker connections and reduce volume.
Is the power supply universal?
The amplifier is designed for AC 230V ~ 50/60 Hz only. Do not connect to other voltages without a step-down transformer.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format.
User questions about eGPA4-150 Ecler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual eGPA4-150 - Ecler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eGPA4-150 by Ecler.
USER MANUAL eGPA4-150 Ecler
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ecler
Model : eGPA4-150
Category : Receiver