Sonicare 6500 Series HX7410 - Toothbrush PHILIPS - Free user manual and instructions

Product Type	Sonic electric toothbrush
Brand	Philips
Model	Sonicare 6500 Series HX7410
Dimensions (approx.)	25 cm (height) × 3 cm (brush head diameter)
Weight	150 g (approx.)
Power supply	Rechargeable lithium-ion battery, inductive charger included
Battery life	Up to 2 weeks of use (2 brushings per day)
Brushing technology	Sonic (high-frequency vibrations)
Brushing modes	3 modes: Clean, White, Gum Care
Timer	Built-in 2-minute timer with 30-second interval
Pressure sensor	Yes, light alert if brushing too hard
Charge indicator	LED battery level indicator
Brush head replacement indicator	Automatic reminder every 3 months
Water resistance	Waterproof for shower use (IPX7)
Care and cleaning	Rinse the head after use; dry the handle
Safety	Automatic shutdown after 2 minutes
Spare parts	Replacement brush heads (type C1 or W Slim)
Warranty	2 years (parts and labor)

Frequently Asked Questions - Sonicare 6500 Series HX7410 PHILIPS

How to charge the Philips Sonicare 6500 HX7410 toothbrush?

Place the handle on the inductive charging base. The LED light flashes during charging and stays on when fully charged. Full charge takes approximately 24 hours.

What are the different brushing modes?

The device offers 3 modes: Clean (daily use), White (to remove stains), and Gum Care (gentle massage).

How often should the brush head be replaced?

It is recommended to replace the head every 3 months, or sooner if bristles are worn. A reminder indicator lights up automatically.

Is the toothbrush waterproof? Can I use it in the shower?

Yes, the handle is waterproof (IPX7) and can be used in the shower. However, do not immerse the charger in water.

How to enable and disable travel lock?

To lock, hold the power button for 5 seconds until the light flashes 3 times. To unlock, repeat the operation.

What if the toothbrush does not work or charge?

Check that the charging base is plugged in and the handle is correctly seated. Try cleaning the metal contacts. If the problem persists, contact Philips support.

How to clean the toothbrush?

Rinse the head and handle with warm water after each use. Wipe with a soft cloth. Do not use abrasive products. Do not immerse the handle in water.

Are brush heads interchangeable with other Sonicare models?

This model uses standard Sonicare heads (C or W series). Check compatibility with model HX7410. The heads use the same attachment pad.

Is there a pressure sensor? How does it work?

Yes, a sensor detects if you press too hard. A light flashes and brushing slows down to alert you.

How to reset the brush head replacement indicator?

After changing the head, hold the power button for 3 seconds to reset the reminder.

USER MANUAL Sonicare 6500 Series HX7410 PHILIPS

Welcome to the Philips Sonicare family! This toothbrush enables you to obtain superior plaque removal, whiter teeth and healthier gums. Using Sonicare's combination of gentle sonic technology and clinically developed and proven features, you can be confident that you're getting the very best clean, every time.

Further support and product registration are available to you at:

www.philips.com/support

Important safety information

Only use the product for its intended purpose. Read this information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries.

WARNINGS

- Only use original Philips accessories or consumables. If supplied, only use the original USB cable and USB power supply unit.

- This appliance contains no user-serviceable parts. If the appliance is damaged, stop using it and contact the Consumer Care Center in your country. If the USB cable is damaged, stop using it.

- Keep the chargers and Travel-charger-case away from water.

- After cleaning, make sure the chargers and travel charger cases are completely dry before you connect these.

- This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.

- Children should be supervised to ensure that they do not play with the product.

- Do not clean any part of the product in the dishwasher.

- Do not use adapters and chargers outdoors or near heated surfaces.

- This appliance has only been designed for cleaning teeth, gums and tongue.

- Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of wear appear.

- Avoid direct contact with products that contain essential oils or coconut oil. Contact may result in bristles dislodging.

- The maximum altitude of use is 4500 meters.

MEDICAL WARNINGS

• Stop using the appliance and consult your dentist/doctor if excessive bleeding occurs after use, if bleeding continues to occur after 1 week of use or if you experience discomfort or pain.
• If you have had oral or gum surgery in the previous 2 months, consult your dentist before you use this appliance.
• If you have a pacemaker or other implanted device, contact your doctor or the manufacturer of the implanted device prior to use.
• If you have medical concerns, consult your doctor before you use this appliance.
• This appliance is a personal care device and is not intended for use on multiple patients in a dental practice or institution.

BATTERY SAFETY INSTRUCTIONS

• This appliance contains batteries that are only removable by skilled persons.
• Only use the product for its intended purpose. Read this information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries. Accessories supplied may vary for different products.
• Only use original Philips accessories and consumables.
• Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
• If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
• Do not place products and their batteries in microwave ovens or on induction cookers.
• Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
• This appliance contains batteries that are non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of, see section on Recycling.
• Charge only with Philips HX6110, HYTCxx or safety approved adapters with input ratings: 4.75-5.25VDC, 1.5W.
• Charge and use the product at a temperature between 0 °C and 40 °C (32°F and 104 °F).

- To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminium foil. Tape battery terminals or put batteries in a plastic bag before you discard them.

- This appliance contains a Lithium-ion rechargeable cell. MUST BE RECYCLED OR DISPOSED OF PROPERLY.

Storage and transportation conditions

Temperature -20°C to +60°C (-4 °F to 140 °F).

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Radio Equipment Directive

Hereby, Philips declares that electric toothbrushes with radio equipment type (Bluetooth, NFC) are in compliance with Directive 2014/53/EU.

- The Bluetooth radio frequency interface in applicable products operates at 2.4 GHz.

- The maximum output power by the Bluetooth appliance is 3 dBm.

- The NFC radio frequency interface in applicable products operates at 13.56 MHz

- The maximum RF power transmitted by the appliance is 30.16 dBm.

The full text of the EU declaration of conformity is available at the following internet address: www.philips.com/support

Note: The features of different models may vary. Some models may not be equipped with Bluetooth or NFC.

SAVE THESE INSTRUCTIONS

The following symbols may appear on the product:

This symbol means read the instructions for use before using the appliance.

This symbol means to use the indicated power supply.

Intended use

Sonicare power toothbrushes are intended to remove adherent plaque and food debris from the teeth to reduce tooth decay and improve and maintain oral health.

Your Philips Sonicare (Fig 1.)

1 Handle 2 Power on/off button 3 Intensity indicator 4 Mode/intensity button 5 Mode indicator 6 Brush head replacement reminder 7 Battery indicator 8 Light ring

Accessories:

9 Brush head cap

10 Smart brush head(s) 11 BrushSync symbol 12 USB charger (wall adapter not included) 13 Travel case 14 Charging travel case 15 USB cable

Note: Accessories included may vary based on the model purchased.

Sonicare app - Getting started

The Sonicare app pairs with your toothbrush to provide you a connected experience. By connecting your toothbrush to your Sonicare app account, you will be able to:

- Track your brushing progress

• Receive personalized tips and actionable recommendations to improve your oral health
• Access the full range of benefits and receive ongoing upgrades. The app is compatible with a wide range of mobile phones.

To start using the Sonicare app:

1. Download the Sonicare app to your phone. 2. Ensure that Bluetooth for your phone is turned on. 3. Pick up your toothbrush to ensure it is active (lights on). 4. Open the app and follow the steps. 5. Pair your toothbrush with the app. 6. Create your account via the app. Complete firmware update, if prompted, to access the latest improvements and features. 7. Brush regularly with your toothbrush connected to the app. When you regularly sync the toothbrush with the app, you will receive updates to help improve your oral healthcare. 8. Sync regularly. 9. Keep your phone close to your toothbrush for optimal data transfer.

To sync manually: Connect your toothbrush with the app every two weeks to benefit from the app features/capabilities.

To sync automatically: Allow location permission while setting up the app. By allowing location permission, your phone knows when it is in the connection range of your toothbrush and can refresh your brushing data in the app to provide the latest insights and recommendations.

Note: Make sure your phone's Bluetooth is switched on when using the app so that your toothbrush can transfer and update your brushing data in the app. If you have questions about why your brushing data is collected, be sure to review the Sonicare Privacy Statement, available throughout the app setup process.

App features

Your Sonicare power toothbrush is equipped with smart sensors to provide you with feedback about your brushing habits, including:

• Daily brushing sessions
• Time spent during each brushing session
• Applied brushing pressure
• Personalized tips and actionable recommendations
• Brush head replacement reminder (based on actual use)

The Sonicare app collects the data provided by the smart sensors and tracks your brushing habits over time.

Getting started

Attaching the brush head

1 Align the brush head so the bristles point in the same direction as the front of the handle.

2 Firmly press the brush head down onto the metal shaft until it will not go any further.

Note: It is normal to see a slight gap between the brush head and the handle.

Using your Philips Sonicare toothbrush

If you are using your Sonicare toothbrush for the first time, it is normal to feel more vibration than when using a non-electric toothbrush. It is common for first-time users to apply too much pressure. Only apply gentle pressure and let the toothbrush do the brushing for you. Please follow the brushing instructions below for the best experience.

To help you transition to your new Sonicare power toothbrush, use a lower setting for the first 1-2 weeks, then transition to a higher setting.

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.

2 Place the toothbrush bristles against the teeth at a slight angle (45 degrees). Pressing firmly to make the bristles reach the gumline or slightly beneath the gumline.

Note: Keep the center of the brush in contact with the teeth at all times.

3 Press the power on/off button to switch on the Philips Sonicare.

4 Gently keep the bristles placed on the teeth and in the gumline. Brush your teeth with small back and forth motion so the bristles reach between the teeth. Continue this motion throughout your brushing cycle.

Note: The bristles should slightly flare. It is not recommended to scrub as you would with a manual toothbrush.

Note: If you apply too much pressure, you will be alerted by a change in vibration of the handle and a flashing purple brushing feedback light.

5 To clean the inside surfaces of the front teeth, tilt the brush handle semi-upright and make several vertical overlapping brushing strokes on each tooth. 6 After you have completed the brushing cycle, you can spend additional time brushing the chewing surfaces of your teeth and areas where staining occurs. You can also brush your tongue, with the toothbrush switched on or off, as you prefer.

Note: Your Philips Sonicare toothbrush is safe to use on braces (brush heads wear out sooner when used on braces) and dental restorations (fillings, crowns, veneers) if they are properly adhered and not compromised.

BrushPacer

To make sure you brush evenly throughout the mouth, divide your mouth into 6 sections using the BrushPacer feature. The BrushPacer divides the brushing time into 6 equal segments and indicates when you should move to the next area. The segments are indicated with a brief pause in vibration. The toothbrush automatically stops at the end of the brushing session.

Note: Additional time may be added when you use the White or Gum Health modes.

Modes

Your power toothbrush is equipped with up to 4 different modes: Clean, Sensitive, White, and Gum Health.

Based on the smart brush head you use, the optimal mode and intensity will be selected automatically by the BrushSync technology.

To manually change the mode, press the mode/intensity button when the toothbrush is off. All brush heads work with each mode.

Clean Sensitive Gum Health White

Benefit Plaque removal	Extra gentle mode for sensitive teeth and gums	Plaque removal and gum massage	Plaque and surface stains removal
Recommended intensity level	High Low* High High
Total brushing time	2 minutes 2 minutes 3 minutesand 20 seconds	2 minutes and 40 seconds

Clean Sensitive Gum Health White

How to brush	Brush each segment for 20 seconds.	Brush each segment for 20 seconds	Brush each segment for 20 seconds,	Brush each segment for 20 seconds,
			then brush segments 7,8,9 and 10 for 20 seconds each.	then brush segments 7 and 8 for 20 seconds each.

Intensities

Intensity settings

Your power toothbrush comes with 3 different intensity settings:

• High intensity (three lights)
• Medium intensity (two lights)
• Low intensity (one light)

Note: We recommend high intensity for best results.

To manually select your desired intensity, press the mode/intensity button when the toothbrush is on, to cycle through the options. The intensity setting can only be changed when the toothbrush is on.

BrushSync technology

BrushSync technology enables your brush head to communicate with your handle using a microchip. The symbol at the bottom of the brush head indicates that the brush head is equipped with this technology.

BrushSync technology enables:

- Brush head replacement reminder

- BrushSync mode pairing

Philips Sonicare offers a wide range of smart brush heads, equipped with BrushSync technology. To explore our full range of toothbrush brush heads, and find the brush head that is best for you, go to

www.philips.com/toothbrush-heads for more information.

Features

• Pressure Sensor Feedback
• BrushPacer
• SmarTimer
• EasyStart
• Brush Head Replacement Reminder
• Brush Head Mode Pairing

Pressure Sensor Feedback

Your Sonicare toothbrush measures the pressure you apply while brushing, to protect your gums and teeth from damage.

If you apply excess pressure, the handle changes its sound and vibration while the brushing feedback light flashes purple at the bottom of the handle until you reduce the pressure.

Note: Your product comes with the Pressure Sensor Feedback activated. To deactivate this feature (see 'Activating or deactivating features').

BrushPacer

The BrushPacer is an interval timer that helps you to brush evenly through the mouth by dividing your mouth into 6 sections.

Note: Additional time may be added when you use the White or Gum Health modes.

SmarTimer

The SmarTimer indicates that your brushing cycle is complete by automatically switching off the toothbrush at the end of the brushing cycle.

Dental professionals recommend brushing no less than 2 minutes twice a day.

Note: If you press the power on/off button after you started the brushing cycle, the toothbrush pauses. If you press the on/off button within 30 seconds, the timer resumes to allow you to finish your brushing cycle. After a pause of 30 seconds, the SmarTimer resets.

EasyStart

This Philips Sonicare model comes with the EasyStart feature deactivated. The EasyStart feature gently increases the power over the first 14 brushings to help you get used to brushing with the Philips Sonicare. The EasyStart feature works with all modes.

*Disclaimer

When the Philips Sonicare toothbrush is used in clinical studies, it must be used at high intensity with the handle fully charged and the EasyStart feature deactivated.

To activate EasyStart (see 'Activating or deactivating features').

Brush Head Replacement Reminder

Your Philips Sonicare is equipped with BrushSync technology that tracks the wear of your brush head.

Note: This feature only works with Philips Sonicare smart brush heads with BrushSync technology.

1 When you attach a new smart brush head for the first time, the handle recognizes that you have a Philips brush head with BrushSync technology and begins tracking brush head wear.

2 Over time, based on the pressure you apply and the total time the brush head has been used, the handle tracks brush head wear in order to determine the optimal time to replace your brush head. This feature guarantees the best cleaning and care of your teeth.

3 When the Brush Head Replacement Reminder indicator lights up amber, you should replace your brush head.

Note: All smart brush heads come with the brush head replacement reminder feature activated. To deactivate the brush head replacement reminder see 'Activating or deactivating features'.

Brush head mode pairing

Brush heads with BrushSync technology are equipped with a microchip which communicates with the handle and automatically pairs it with the recommended mode and intensity. Most brush heads with BrushSync technology will auto pair to Clean Mode. Brush heads with specific benefits will pair with the corresponding mode (when available), examples include:

- G3 Premium Gum Care: Gum Health Mode

- W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White Mode

- S2 Sensitive: Sensitive Mode

Note: If you choose to change mode/intensity from the recommended setting, the brush head will remember the your chosen setting for future brushing sessions.

Activating or deactivating features

You can activate or deactivate the following features of your toothbrush:

• EasyStart
• Brush Head replacement reminder
• Pressure Sensor Feedback

Note: The brush head replacement reminder is only compatible with Sonicare smart brush heads. The smart brush head must be attached to the toothbrush in order to activate or deactivate the replacement reminder.

From handle:

Step 1: Place the handle on a plugged in charger/charging travel case.

Step 2: Press and hold power on/off button for:

EasyStart Brush Head Replacement Reminder Pressure Sensor Feedback

Up to 3 seconds Up to 5 seconds Up to 7 seconds

Step 3: Let go of the power on/off button when you hear:

1 beep 1 beep and then 2 beeps 1 beep, 2 beeps and then 3 beeps

Together with:

If you see the left LED for the battery indicator flash green 2 times and hear 3 tones low to high, then the feature has been activated.

OR

If you see the left LED for the battery indicator flash amber 1 time and hear 3 tones high to low, then the feature has been deactivated.

Charging and battery status

This Philips Sonicare toothbrush is designed to provide on average 42 brushing sessions, each session lasting 2 minutes (21 days if used twice per day) on a fully charged battery. The battery indicator shows the battery status when you complete the 2-minute brushing session, when you pause the toothbrush, or while it is charging.

Note: It can take up to 24 hours to fully charge the battery before first use, but you can use the Philips Sonicare toothbrush before it is fully charged.

Note: Charging your Philips Sonicare toothbrush in the travel case can take up to 48 hours.

Charging

Charging on charger

1 Attach the USB charging cord to a wall adapter, plug the wall adapter into an electrical wall outlet.

2 Place the handle on the charger. 3 Connect the attached USB cable to the 5V DC input power supply unit.

• Charge only with Philips compatible chargers or safety approved adapters with input ratings: 100 - 240V~; 50/60Hz; 3.5W and output ratings 5VDC; 2.5W.
• A UL-listed or certified 1310 Class 2 power supply (NAM only)

4 The battery indicator and light ring illuminate, the handle beeps twice, and all lights on the handle illuminate upward from the bottom of the handle.

5 The flashing light of the battery indicator shows that the toothbrush is charging.

6 When the handle is on the charger and the battery is fully charged, the LED lights of the battery indicator start flashing green. Once the battery is full, the green light remains solid for 30 seconds and then turns off.

Charging with the travel case

Note: Accessories included may vary based on the model purchased.

1 Insert the USB cable to the charging travel case. 2 Connect the attached USB cable to the 5V DC input power supply unit.

- Charge only with Philips compatible chargers or safety approved adapters with input ratings: 100 - 240V~; 50/60Hz; 3.5W and output ratings 5VDC; 2.5W.

- A UL-listed or certified 1310 Class 2 power supply (NAM only).

Important: The wall adapter must be a safe extra low voltage source, compatible with the electrical ratings marked on the bottom of the device.

3 Place the handle in the charging travel case.

• The handle emits 2 short beeps to confirm that the handle is placed properly for charging.
• The flashing light of the battery indicator shows that the toothbrush is charging.

4 The travel case will charge your toothbrush until your toothbrush is fully charged.

- When the handle is fully charged, the battery indicator lights up green for 30 seconds and then switches off.

Note: Charging the handle with the charging travel case may take longer than on the charger.

Battery status

Battery status (handle on plugged-in charger/charging travel case)

When the handle is placed on the charger or in the charging travel case, the battery indicator shows the battery level.

Battery status

Number of flashing LEDs

LED color

Low 1 Flashing green

Partially full 2 Flashing green
Full 3 Flashing green until full,	then green for 30 seconds and then switches off

Battery status (when handle is not on plugged-in charger/charging travel case)

When the toothbrush is awake, the battery indicator at the bottom of the handle shows the battery level.

Battery status Number of LEDs LED color

Full 3 Solid green
Partially full 2 Solid green
Medium low 1 Solid green
Low 1 with 3 beeps after brushing	Flashes amber
Empty 1 with 2 beeps after brushing	Flashes amber

Note: To save energy, the battery indicator will switch off when not in use. Note: When the battery is completely empty, the toothbrush switches off. Place the toothbrush on the charger to charge it. Note: To keep the battery fully charged at all times, you may keep your toothbrush on the charger when not in use.

Cleaning

Toothbrush handle

22 English

1 Remove the brush head and rinse the metal shaft area and buttons with warm water. Make sure you remove any residual toothpaste on the handle and around the buttons at least once a week, but preferably after each use.

Caution: Do not push on the rubber seal on the metal shaft or around buttons with sharp objects, as this may cause damage.

2 Wipe the entire surface of the handle with a damp cloth.

Note: Do not tap the handle on the sink to remove excess water.

3 Dry the handle with a soft cloth or towel.

Brush head

1 Rinse the brush head and bristles after each use. 2 Remove the brush head from the handle and rinse the brush head connection with warm water at least once a week. Rinse the travel cap as often as needed and air dry. Use only on a dry brush head.

Note: The brush head cap is used for shipping purposes and is not intended for continued use.

Charger

1 Unplug the charger before you clean it. 2 Wipe the surface of the charger with a damp cloth. 3 Dry the charger with a soft cloth or towel.

Travel case

Rinse with warm water and use a damp cloth to clean the travel case and allow to air dry.

Charging travel case

1 Unplug the charging travel case before cleaning. 2 Use damp cloth to wipe the surface of the travel case and allow to air dry.

Storage

If you are not going to use the product for an extended period of time, unplug it from the electrical outlet, clean it and store it in a cool and dry place away from direct sunlight.

Replacement

Replace Philips Sonicare brush heads every 3 months to achieve optimal results. Use only Philips Sonicare replacement brush heads.

Locating the model number

Look on the bottom of the Philips Sonicare toothbrush handle for the model number (e.g.HX740x).

Troubleshooting (ROW)

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support and insert your model number for a list of frequently asked questions or contact the Consumer Care Center in your country.

Problem Possible Cause Solution

I cannot fully attach the brush head. There is a gap between the brush head and handle.		This gap is normal and is needed for the brush head to vibrate appropriately. The brush head must be able to move to create the right amount of vibrations.
My Philips Sonicare toothbrush vibration is less powerful than before.	The brush head is too close to the body of the handle.	Remove the brush head from the handle and re-set it on the metal shaft leaving a small gap.(1-2mm).
The toothbrush stops working.	The battery is empty. Charge the toothbrush handle on the charger.
I charged my toothbrush, but it only works for a short time.	The toothbrush handle is not placed vertically on the charger, resulting in no charge.	Place the handle vertically on charger base and make sure the charger is plugged in.

WARRANTY EXCLUSIONS

What is not covered under warranty:

• In mouth attachments including brush heads and nozzles.
• Damage caused by use of unauthorized replacement parts or unauthorized brush heads.
• Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
• Normal wear and tear, including chips, scratches, abrasions, discoloration or fading.

IMPLIED WARRANTIES

ANY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THE EXPRESS WARRANTIES SET FORTH ABOVE. IN SOME STATES LIMITATIONS ON DURATION OF IMPLIED WARRANTIES DO NOT APPLY.

LIMITATION OF REMEDIES

IN NO EVENT SHALL PHILIPS OR ANY OF ITS AFFILIATED OR SUBSIDIARY COMPANIES BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, WITHOUT LIMITATION, LOSS OF SAVINGS OR REVENUE; LOSS OF PROFIT; LOSS OF USE; THE CLAIMS OF THIRD PARTIES INCLUDING, WITHOUT LIMITATION, DENTISTS AND DENTAL HYGIENISTS; AND COST OF ANY SUBSTITUTE EQUIPMENT OR SERVICES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Warranty and support (ROW)

If you need information or support, please visit www.philips.com/support or read the international warranty leaflet.

Warranty exclusions

What is not covered under warranty:

• In mouth attachments including brush heads and nozzles.
• Damage caused by use of unauthorized replacement parts or unauthorized brush heads.
• Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
• Normal wear and tear, including chips, scratches, abrasions, discoloration or fading.

Recycling

This symbol means that electrical products and batteries shall not be disposed of with normal household waste.

Follow your country's rules for the separate collection of electrical products and batteries.

The built-in rechargeable battery must be removed by a qualified professional when the product is discarded. Instructions for removal of built-in rechargeable batteries can be found on

www.philips.com/support. Use the Philips support home search bar to enter the toothbrush model number and find your product. The model number begins with "HX" (e.g. HX123A) and can be found on the bottom of your toothbrush. The battery removal instructions are in the Troubleshooting and Repair section of the product's support page.

If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.

When you handle batteries, make sure that your hands, the product and the batteries are dry.

Introduction

www.philips.com/support

www.philips.com/support

Clean Sensitive (Sensitive teeth) Gum Health White

www.philips.com/support

Danish

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

- G3 Premium Gum Care: Gum Health setting

• W3 Premium White or W(c) DiamondClean (NAM)/W OptimalClean (ROW): White setting
• S2 Sensitive: Sensitive setting

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

- G3 Premium Gum Care: Gum Health cleaning program

- W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode

- S2 Sensitive: Sensitive mode

www.philips.com/support

Important safety information

MEDICAL WARNINGS

www.philips.com/support

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

Kuidas harjata	Harjake iga segmenti 20 sekundit.	Harjake iga segmenti 20 sekundit	Harjake iga segmenti 20 sekundit,	Harjake iga segmenti 20 sekundit,
			seejärel harjake 7,8,9. ja 10. segmenti mölemat 20 sekundit.	seejärel harjake 7. ja 8. segmenti mölemat 20 sekundit.

Speeds

- S2 Sensitive: Sensitive mode

Spanish

IMPLIED WARRANTIES

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

- G3 Premium Gum Care: Gum Health mode

- W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode

- S2 Sensitive: Sensitive mode

WARRANTY EXCLUSIONS

www.philips.com/support

www.philips.com/support

Note: Features of different models may vary. Some models may not be equipped with Bluetooth or NFC.

SAVE THESE INSTRUCTIONS

The following symbols may appear on the product:

This symbol means that you must read the instructions for use before using the device.

This symbol means that you must use the indicated power supply.

Intended use

Sonicare electric toothbrushes are intended for the removal of plaque and food debris from teeth to reduce caries and to improve and maintain oral health.

Your Philips Sonicare (Fig. 1)

1 Handle 2 Power on/off button 3 Intensity indicator 4 Mode/intensity button 5 Mode indicator 6 Brush head replacement reminder 7 Battery indicator 8 Light ring

Accessories:

9 Brush head cap

10 Smart brush heads 11 BrushSync feature symbol 12 USB charger (wall adapter not included) 13 Travel case 14 Rechargeable travel case 15 USB cable

Note: The accessories supplied may vary depending on the model purchased.

Sonicare app – getting started

The Sonicare app pairs with your toothbrush to enable connectivity. By connecting your toothbrush to your Sonicare app account, you will be able to:

- Track your brushing progress

2 Press the brush head firmly down onto the metal shaft of the handle until it stops.

Note: It is normal to see a slight gap between the brush head and the handle.

Using your Philips Sonicare toothbrush

If you are using a Sonicare toothbrush for the first time, it is normal to feel more vibrations than with a non-electric toothbrush. Users often apply too much pressure when using it for the first time. Just press gently and let the toothbrush do the brushing. For the best experience, follow the brushing instructions below.

To make it easier to switch to your new Sonicare electric toothbrush, use the lower setting for the first 1-2 weeks, then switch to the higher setting.

Brushing instructions

1. Wet the bristles and apply a small amount of toothpaste.

To manually change the mode, press the mode/intensity button while the toothbrush is off. All brush heads work in every mode.

Clean Sensitive Gum Health White

Prednost uklanjanje naslaga	izuzetno osjetljivi način rada za osjetljive zube i desni	uklanjanje naslaga i masaža desni	uklanjanje naslaga i površinskih mrlja
Preporučena razina intenziteta	visoka niska* visoka visoka
Ukupno vrijeme četkanja	2 minute 2 minute 3 minute i	20 sekundi	2 minute i 40 sekundi

Clean Sensitive Gum Health White

Kako četkati Četkajte svaki segment 20 sekundi.	Četkajte svaki segment 20 sekundi	Četkajte svaki segment 20 sekundi,	Četkajte svaki segment 20 sekundi,
		a zatim segmente 7,8,9 i 10 četkajte svakog po 20 sekundi.	a zatim segmente 7 i 8 četkajte svakog po 20 sekundi.

Intensities

Intensity settings

Your electric toothbrush has three different intensity settings:

• High intensity (three lights)
• Medium intensity (two lights)
• Low intensity (one light)

Note: For best results, we recommend high intensity.

BrushSync technology allows the brush head to communicate with the handle via a microchip. The symbol on the bottom of the brush head indicates that the brush head is equipped with this technology.

BrushSync technology enables:

2 Place the handle on the charger.

3 Connect the supplied USB cable to a 5 V DC input power supply. - Only charge using compatible Philips adapters or other adapters approved for safe operation and with the following rated input values: 100 – 240 V~; 50/60 Hz; 3.5 W and rated output values 5 V DC; 2.5 W. - Class 2 power supply (NAM only) with UL marking or certification 1310

4 The battery indicator and light ring will light up, the handle will emit two beeps, and the lights on the handle will light up from the bottom of the handle upwards.

5 Flashing of the battery indicator shows that the brush is charging.

Note: The supplied accessories may vary depending on the model purchased.

1 Insert the USB cable into the travel charging case. 2 Connect the supplied USB cable to a 5 V DC input power supply. - Only charge using compatible Philips adapters or other adapters approved for safe operation and with the following rated input values: 100 – 240 V~; 50/60 Hz; 3.5 W and rated output values 5 V DC; 2.5 W. - Class 2 power supply (NAM only) with UL marking or certification 1310.

1 Remove the brush head and rinse the area around the metal shaft and buttons with warm water. At least once a week, and preferably after each use, be sure to remove any remaining toothpaste from the handle and around the buttons.

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

www.philips.com/support

1 Apply a small amount of toothpaste to the brush head.

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

Kā tīrīt tīriet katru segmentu 20 sekundes.	tīriet katru segmentu 20 sekundes.	Tīriet katru segmentu 20 sekundes,	Tīriet katru segmentu 20 sekundes,
		pēc tam tīriet 7,8,9. un 10. segment- u — katru 20 sekundes.	pēc tam tīriet 7. un 8. segmentu — katru 20 sekundes.

www.philips.com/support

Important safety information

www.philips.com/support

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

www.philips.com/support

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

Poetsinstruc-ties	Poets elk segment 20 seconden lang.	poets elk segment 20 seconden lang	poets elk segment 20 seconden lang,	poets elk segment 20 seconden lang,
			poets vervolgens segment 7,8,9 en 10 elk 20 seconden lang.	poets vervolgens segment 7 en 8 elk 20 seconden lang.

Intensity

Intensity levels

• G3 Premium Gum Care: Gum Health mode
• W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive brushing mode

www.philips.com/support

Norwegian

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

3 When the brush head replacement indicator lights up yellow, you should replace the brush head.

www.philips.com/support

Important safety information

Use the product only for its intended purpose. Before you start using the product and its batteries and accessories, read this information carefully and keep it for future reference. Incorrect use can lead to hazards or serious injury.

WARNINGS

• Only use original Philips accessories and consumables. If included in the package, only use the original USB cable and USB power supply unit.
• The appliance contains no user-serviceable parts. If the appliance is damaged, stop using it and contact the Customer Service Center in your country. If the USB cable is damaged, stop using it.
• Keep chargers and the travel charger case away from water.
• After cleaning, make sure the chargers and travel charger cases are completely dry before connecting them to the mains.
• This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the product.
• Do not clean any part of the product in the dishwasher.
• Do not use adapters and chargers outdoors or near heated surfaces.
• This device is designed only for cleaning teeth, gums, and tongue.

- Stop using the brush head if the bristles are broken or bent. Replace the brush head every 3 months or sooner if signs of wear appear.

- Avoid direct contact with products containing essential oils or coconut oil. Contact may cause the brush to slip.

Maximum altitude for use: 4500 meters.

MEDICAL WARNINGS

• If excessive bleeding occurs after use, if bleeding continues after 1 week of use, or if you experience discomfort and pain, stop using the device and consult your dentist/physician.
• If you have had oral or gum surgery within the last 2 months, consult your physician before using the device.
• If you have a pacemaker or other implanted device, consult your physician or the manufacturer of the implanted device before use.
• If you have health issues, consult your physician before using this device.
• This device is a personal care appliance and is not intended for use by multiple patients in a dental clinic or institution.

BATTERY SAFETY INSTRUCTIONS

• This device contains batteries that can only be removed by qualified personnel.
• Use the product only for its intended purpose. Before starting to use the product, its batteries, and accessories, read this information carefully and keep it for future reference. Incorrect use can lead to hazards or serious injury. The accessories provided may vary between different products.
• Only use original Philips accessories and consumables.
• Keep the product and batteries away from fire and do not expose them to sunlight or high temperatures.
• If the product heats up abnormally, emits an odor, changes color, or is powered for longer than usual, stop using and charging it and contact Philips.
• Do not place the product and its batteries in a microwave oven or on an induction hob.
• To prevent the batteries from heating up or releasing toxic or hazardous substances, do not open, modify, pierce, damage, or disassemble the appliance or the battery. Do not cause a short circuit, overcharge, or reverse charging of the rechargeable batteries.
• This appliance contains non-replaceable batteries. When the battery reaches the end of its service life, the appliance must be disposed of properly. See the recycling section.
• Only charge with Philips HX6110, HYTCxx, or adapters whose safety has been confirmed with nominal input power: 4.75-5.25 VDC, 1.5 W.
• Charge and use the product at a temperature between 0 °C and 40 °C.
• After removing the battery, prevent metal objects (such as coins, hairpins, rings) from touching the battery terminals to avoid a short circuit. Do not wrap the batteries in aluminum foil. Before disposing of the battery, wrap its terminals with tape or place the battery in a bag.
• This appliance contains a lithium-ion rechargeable battery. IT MUST BE RECYCLED OR DISPOSED OF PROPERLY.

Storage and transport conditions

Temperature from -20°C to +60°C (from -4°F to 140°F).

1 Align the brush head so that the bristles are in the same direction as the front of the handle.

2 Press the brush head firmly onto the metal shaft until it clicks into place.

Note: A small gap between the brush head and the handle is normal.

Using your Philips Sonicare toothpaste

If you are using Sonicare toothpaste for the first time, it is normal to feel more vibration than with a non-electric toothbrush. First-time users typically apply too much pressure. Simply press gently and let the toothbrush do the cleaning for you. For the best experience, follow the brushing instructions.

To help you transition to your new Sonicare power toothbrush, use it on a lower setting for the first 1-2 weeks, then switch to a higher setting.

Brushing instructions

1. Wet the brush and apply a small amount of toothpaste.

2. Hold the toothbrush at a small (45-degree) angle against the teeth. Press firmly enough for the bristles to reach the gum line or just below it. Note: Keep the center of the brush in full contact with the teeth at all times.

3. Press the on/off button to turn on the Philips Sonicare device.

4. Hold the brush lightly against the teeth and gum line. Clean your teeth with small back-and-forth motions so the bristles can get between the teeth. Continue these motions until the end of your brushing cycle.

5. To clean the inner surfaces of the front teeth, hold the handle half-vertically and clean each tooth one by one with a few vertical strokes.

To clean your mouth evenly, divide it into 6 sections using the BrushPacer function. BrushPacer divides the brushing time into 6 equal segments and signals when you should move to the next area. The segments are indicated by a short pause in the vibration. The toothbrush automatically stops at the end of the brushing session.

Note: Additional time may be added when using the White or Gum Health modes.

Modes

Your power toothbrush is equipped with up to 4 different modes: Clean, Sensitive, White, and Gum Health.

Based on the smart brush head you are using, the appropriate mode and intensity are automatically selected by BrushSync technology.

To change this mode in a simple way, press the mode/intensity button while the toothbrush is on. All brush heads work with a separate mode.

Clean Sensitive Gum Health White

Foydasi Qasmoqlarni ketkazish	Sezuvchan tishlar va milklar uchun juda yumshoq rejim	Qasmoqlarni ketkazish va milklarni uqalash	Qasmoqlarni va yuzadagi dog'larni ketkazish
Tavsiya etilgan jadallik darajasi	Yuqori Past* Yuqori Yuqori
Jami tish tozalash vaqti	2 daqiga 2 daqiga 3 daqiga va	20 soniya	2 daqiga va 40 soniya

Clean Sensitive Gum Health White

Your power toothbrush is equipped with 3 types of intensity settings:

• High intensity (three lights)
• Medium intensity (two lights)
• Low intensity (one light)

BrushSync technology helps the brush head communicate with the handle via a microchip. The ♦ symbol under the brush head indicates that the brush head is equipped with this technology.

BrushSync technology activates the following:

- Brush head replacement reminder function

- BrushSync mode pairing

Philips Sonicare offers a wide range of smart brush heads with BrushSync technology. To get acquainted with the full range of toothbrush brush heads and find the one that suits you best,

visit www.philips.com/toothbrush-heads.

Functions

If you apply excessive pressure, the handle sound and vibration will change until you reduce the pressure, and the brushing indicator light at the bottom of the handle will blink (purple).

Note: Your product is supplied with the pressure sensor feature activated. To deactivate this function, see "Activating or deactivating functions".

BrushPacer

• W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive mode

Note: If you choose to change the mode/intensity from the recommended setting, the brush head will remember your chosen setting for future cleaning sessions.

Activating or deactivating functions

2 Place the handle on the charging device.

3 Connect the attached USB cable to a 5V DC power supply.

• Only charge with Philips-compatible chargers or adapters that have been safety-approved for their rated input power: 100 - 240V~; 50/60Hz; 3.5W and output voltage 5VDC; 2.5W.
• Power supply registered with UL or certified to Type 1310 (NAM only)

4 The battery indicator and light ring turn on, the handle beeps twice, and all lights on the handle light up from top to bottom. 5 The blinking battery indicator shows that the toothbrush is charging. 6 When the handle is on the charger and the battery is fully charged, the battery indicator LEDs start blinking green. When the battery is fully charged, the green light stays on for 30 seconds and then turns off.

Charging with the travel case

Note: Accessories in the package may vary depending on the model purchased.

1 Insert the USB cable into the travel charging case. 2 Connect the attached USB cable to a 5V DC power supply.

• Only charge with Philips-compatible chargers or adapters that have been safety-approved for their rated input power: 100 - 240V~; 50/60Hz; 3.5W and output voltage 5VDC; 2.5W.
• UL listed or certified power supply with Class 2 (NAM only).

Important: The wall adapter must be a safe extra-low voltage source that matches the electrical parameters shown under the device.

1 Remove the brush head and rinse the metal shaft and buttons with warm water. Clean toothpaste residue around the handle and buttons at least once a week, but preferably after each use.

Warning: Do not press the rubber seal on the metal shaft or around the buttons with sharp objects, as this may cause damage.

2 Wipe the entire surface of the handle with a damp cloth.

Note: Do not tap the handle against the sink to remove excess water.

3 Dry the handle with a soft cloth or towel.

Brush head

1 Rinse the brush head and brush after each use. 2 Remove the brush head from the handle and rinse the brush head connection part with warm water at least once a week. Rinse the travel cap as often as necessary and air dry. Use only with a dry brush head.

• G3 Premium Gum Care: Gum Health mode
• W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive mode

www.philips.com/support

- S2 Sensitive: Sensitive mode.

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

• G3 Premium Gum Care: Gum Health mode
• W3 Premium White or W DiamondClean (NAM)/W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive mode

www.philips.com/support

Shqip

Clean "Sensitive" Gum Health White

Clean "Sensitive" Gum Health White

• G3 Premium Gum Care: "Gum Health" mode
• "W3 Premium White" or "W DiamondClean (NAM)" / "W OptimalClean (ROW)": "White" mode

- S2 Sensitive: "Sensitive" mode

www.philips.com/support

This symbol means that you must read the instructions for use before using the appliance.

This symbol means that you must use the specified power supply.

Intended use

3 Turn on the Philips Sonicare toothbrush by pressing the power button.

www.philips.com/support

www.philips.com/support

This symbol means that you should read the instruction manual before using the device.

BrushSync technology enables communication between the brush head and the handle via a microchip. The ♿ symbol on the bottom of the brush head indicates that the brush head is equipped with this technology. BrushSync technology allows:

www.philips.com/support

This symbol indicates that you need to read the instruction manual before using the device.

1 Align the brush head so that the bristles face the same direction as the front of the handle.

2 Press the brush head firmly onto the metal shaft until it stops.

1 Wet the bristles and apply a small amount of toothpaste.

2 Place the toothbrush bristles against your teeth at a slight angle (45 degrees). Press firmly so that the bristles reach the gum line or slightly below the gum line.

To manually change the mode, press the mode/intensity button while the toothbrush is turned off. All brush heads work in every mode.

Clean Sensitive Gum Health White

Pogodnost Uklanjanje plaka		Veoma nežan režim za osetljive zube i desni	Uklanjanje plaka i masaža desni	Uklanjanje plaka i mrlja sa površina
Preporučeni nivo intenziteta	Visok Nizak* Visok Visok
Ukupno vreme pranja zuba	2 minuta 2 minuta 3 minuta i 20 sekundi			2 minuta i 40 sekundi

Clean Sensitive Gum Health White

Kako se pere Perite svaki segment 20 sekundi.	perite svaki segment 20 sekundi	perite svaki segment 20 sekundi,	perite svaki segment 20 sekundi,
		a zatim perite segmente 7,8,9 i 10, svaki po 20 sekundi.	a zatim perite segmente 7 i 8, svaki po 20 sekundi.

Intensity

Intensity settings

The electric toothbrush has 3 different intensity settings:

• High intensity (three lights)
• Medium intensity (two lights)
• Low intensity (one light)

Note: For best results, we recommend high intensity.

To manually select the desired intensity, press the mode/intensity button while the toothbrush is on to cycle through the options. The intensity setting can only be adjusted when the toothbrush is on.

BrushSync technology

If you press too hard, the handle changes sound and vibration, and the brushing feedback light flashes purple at the bottom of the handle until you reduce the pressure.

Note: The product is shipped with pressure sensor feedback activated. To deactivate this function (see 'Activating or deactivating functions').

BrushPacer

2 Place the handle on the charger. 3 Connect the supplied USB cable to a 5 V DC input power supply.

Note: Included accessories may vary depending on the model purchased.

1 Insert the USB cable into the travel charging case.

2 Connect the supplied USB cable to the 5 V DC input power.

1 Remove the brush head and rinse the area around the metal shaft and buttons with warm water. At least once a week, and preferably after each use, be sure to remove all remaining toothpaste from the handle and around the buttons.

Caution: Do not push the rubber seal on the metal shaft or in the area around the buttons with sharp objects as this may cause damage.

2 Wipe the entire surface of the handle with a damp cloth.

Note: Do not tap the handle against the sink to remove excess water.

1 Rinse the brush head and bristles after each use. 2 At least once a week, remove the brush head from the handle and rinse its connection with warm water. Rinse the travel cap whenever necessary and air dry. Place it only on a dry brush head.

Note: The brush head cap is used for transport and is not intended for permanent use.

Charger

1 Unplug the charger from the electrical outlet before cleaning. 2 Wipe the surface of the charger with a damp cloth. 3 Dry the charger with a soft cloth or towel.

Travel case

Rinse the travel case with warm water and clean it with a damp cloth, then allow it to air dry.

Travel charging case

1 Before cleaning, unplug the travel charging case from the power source. 2 Wipe the surface of the charger and travel case with a damp cloth and allow it to air dry.

Storage

If you will not use the product for an extended period, unplug it from the wall outlet, clean it, and store it in a cool, dry place away from direct sunlight.

Replacement

Replace the Philips Sonicare brush heads every 3 months for optimal results. Use only Philips Sonicare replacement brush heads.

www.philips.com/support

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

• G3 Premium Gum Care: Gum Health mode
• W3 Premium White and W DiamondClean (NAM) / W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive mode

2 Place the handle on the charger.

www.philips.com/support

www.philips.com/support

Important safety information

Use this product only for its intended purpose. Read this information carefully before using the product and its batteries and accessories, and keep it for future reference. Misuse can lead to hazards or serious injury.

WARNINGS

• Use only genuine Philips accessories or consumables. If provided, use only the original USB cable and USB power supply unit.
• This device contains no user-serviceable parts. If the device is damaged, stop using it and contact the Customer Support Center in your country. If the USB cable is damaged, stop using it.
• Keep chargers and travel charging cases away from water.
• After cleaning, make sure the chargers and travel charging cases are completely dry before connecting them.
• This device can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not clean any part of the product in a dishwasher.
• Do not use adapters and chargers outdoors or near heated surfaces.
• This device is designed only for cleaning teeth, gums, and tongue.
• Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of wear appear.
• Do not come into direct contact with products containing essential oils or coconut oil. Contact may cause bristles to fall out.
• Maximum operating altitude is 4500 meters.

MEDICAL WARNINGS

• If excessive bleeding occurs after use, if bleeding continues for more than a week after use, or if you feel discomfort or pain, stop using the device and consult your dentist/physician.
• If you have had oral or gum surgery in the past 2 months, consult your dentist before using this device.
• If you have a pacemaker or another implanted device, consult your physician or the manufacturer of the implanted device before use.
• If you have any medical concerns, consult your physician before using this device.
• This product is a personal care device and is not intended for use on multiple patients in a dental clinic or office.

BATTERY SAFETY INSTRUCTIONS

This symbol means that you should read the user instructions before using the device.

This symbol indicates that the specified power supply must be used.

Intended Use

Sonicare Prestige electric toothbrushes are intended to reduce tooth decay and maintain oral health by removing plaque and food debris from teeth.

Your Philips Sonicare device (Fig. 1)

1 Align the brush head so that the bristles face the same direction as the front of the handle.

2 Press the brush head onto the metal shaft until it stops.

1 Wet the bristles and apply a small amount of toothpaste.

Clean Sensitive Gum Health White

Yeñillik Daş aýrymak Duýgur dişlerwe diş etleriüçin iňnänmylaýymtertip		Daş aýrymakwe diş etimassaży	Daş we üsttegmilleraýrymak
Maslahatberilýanýygjamlykderejesi	Yokary Pes* Yokary Yokary
Jemiçotgalamawagty	2 minut 2 minut 3 minut we	20 sekunt	2 minut we40 sekunt

Clean Sensitive Gum Health White

Çotgalaÿys usuly	Her segmenti 20 sekunt çotgalaň.	Her segmenti 20 sekunt çotgalaň	Her segmenti 20 sekunt çotgalaň,	Her segmenti 20 sekunt çotgalaň,
			soñra segment 7,8,9 bilen 10-iň her birini 20 sekunt çotgalaň.	soñra segment 7 bilen 8-iň her birini 20 sekunt çotgalaň.

Settings

Settings adjustments

Your electric toothbrush comes with 3 different settings:

• High setting (three lights)
• Medium setting (two lights)
• Low setting (one light)

Note: For best results, we recommend the high setting.

If you apply too much pressure, the handle will change its sound and vibration until you reduce the pressure, and the brushing feedback light under the handle will flash blue.

BrushPacer is an interval timer that helps you brush evenly throughout your mouth by dividing it into 6 sections.

Note: When using White or Gum Health modes, additional time may be added.

SmarTimer

• W3 Premium White or W DiamondClean (NAM) / W OptimalClean (ROW): White mode
• S2 Sensitive: Sensitive mode

2 Place the handle on the charger. 3 Connect the USB cable to a 5V constant power source,

Turkmen

• Only charge with Philips-compatible or input-level adapters certified for the safety levels given below: 100 - 240V~; 50/60Hz; 3.5W and output levels 5V DC; 2.5W.
• Power source compliant with UL requirements or certified to 1310 Class 2 standard (NAM only)

1 Rinse the attachment and bristles after each use. 2 At least once a week, detach the attachment from the handle and rinse the attachment connection with warm water. Rinse the travel cap as often as necessary and air dry. Only use the attachment when dry.

Note: The attachment cap is for travel and is not intended for continuous use.

Charger

Warranty and support (ROW)

If you need information or support, visit www.philips.com/support or read the international warranty leaflet.

www.philips.com/support

www.philips.com/support

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White

Кантип	Ар бир	Ар бир	Ар бир	Ар бир
тишти	сегментти	сегментти	сегментти	сегментти
тазалоо	20 секунддай	20 секунддай	20 секунддай	20 секунддай
керек	тазалаңыз.	тазалаңыз	тазалаңыз,	тазалаңыз,
			Андан кийин 7,8,9 жана 10-сегментт-ин ар бирин 20 секунддай тазалаңыз.	Андан кийин 7 жана 8-сегменттин ар бирин 20 секунддай тазалаңыз.

Intensity

2 Place the handle on the charger. 3 Connect the supplied USB cable to a 5V DC power source.

Macedonian

Clean Sensitive Gum Health White

Clean Sensitive Gum Health White