Zipper

ZI-BHS2600 - Hedge trimmers Zipper - Free user manual and instructions

Find the device manual for free ZI-BHS2600 Zipper in PDF.

📄 38 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Zipper ZI-BHS2600 - page 20
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Hedge Trimmer
Brand Zipper
Model ZI-BHS2600
Engine Type 2-Stroke Petrol Engine
Engine Displacement 26 cc
Blade Length 60 cm
Cutting Speed 2800 rpm
Weight 5.5 kg
Fuel Tank Capacity 0.5 L
Oil Tank Capacity 0.2 L
Noise Level 96 dB(A)
Vibration Level 8.0 m/s²
Dimensions (L x W x H) 110 x 25 x 25 cm
Cutting Teeth Spacing 32 mm
Fuel Mix Ratio 50:1 (Petrol:2-Stroke Oil)
Safety Features Dual Switch, Blade Guard, Anti-Vibration Handle
Maintenance Blade Sharpening, Air Filter Cleaning, Spark Plug Check
Spare Parts Availability Available from Zipper Service Centers
Warranty 2 Years

Frequently Asked Questions - ZI-BHS2600 Zipper

What fuel mixture does the ZI-BHS2600 require?
Use a 50:1 mix of unleaded petrol and high-quality 2-stroke oil. Do not use pre-mixed fuel older than 30 days.
How should I start the hedge trimmer?
Ensure the chain brake is engaged, press the primer bulb 5 times, set the choke to cold start, pull the starter cord until the engine fires, then open the choke and restart.
How do I clean the blade after use?
Remove the spark plug cap, wear gloves, and use a stiff brush with warm water to remove sap and debris. Dry thoroughly and apply a light coat of oil.
What safety gear is recommended?
Always wear safety glasses, hearing protection, sturdy gloves, and non-slip footwear. Use a face shield when working overhead.
How do I store the hedge trimmer for winter?
Drain the fuel tank, run the engine until it stops, clean the unit, and store in a dry place. Remove the spark plug and add a teaspoon of oil into the cylinder.
Can I cut thick branches with this trimmer?
Maximum cutting thickness is about 32 mm. For larger branches, use a pruning saw to avoid damaging the blades.
What is the warranty period for the ZI-BHS2600?
Zipper offers a 2-year warranty against manufacturing defects. Proof of purchase is required for service.
Where can I purchase replacement blades?
Replacement blades can be ordered from authorized Zipper dealers or directly from the manufacturer's spare parts portal.
How do I adjust the handle for better comfort?
Loosen the handle adjustment knob on the rear shaft, rotate the handle to the desired angle, and retighten the knob securely.
What should I do if the engine fails to start?
Check the fuel mixture, spark plug connection, and air filter. If still not starting, consult the troubleshooting section of your manual.

User questions about ZI-BHS2600 Zipper

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hedge trimmers in PDF format for free! Find your manual ZI-BHS2600 - Zipper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZI-BHS2600 by Zipper.

USER MANUAL ZI-BHS2600 Zipper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Zipper

Model : ZI-BHS2600

Category : Hedge trimmers