Pitchstrap - Uncategorized KORG - Free user manual and instructions
Find the device manual for free Pitchstrap KORG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Clip-on chromatic tuner |
| Brand | Korg |
| Model | Pitchstrap |
| Dimensions | Approximately 50 x 30 x 20 mm |
| Weight | Approximately 20 g |
| Power supply | CR2032 3V button battery |
| Main functions | Chromatic tuning, calibration A4=440Hz, guitar/bass/ukulele modes, LCD display with tone indicator |
| Care and cleaning | Clean with a soft, dry cloth; avoid any contact with water |
| Safety | Keep out of reach of children; do not expose to extreme temperatures |
| Spare parts and repairability | Replaceable battery; no spare parts available individually |
| General information | Product from the brand Korg, suitable for acoustic and electric string instruments |
Frequently Asked Questions - Pitchstrap KORG
How to install the battery on the Pitchstrap?
Open the battery compartment on the back of the device using a screwdriver. Insert a CR2032 battery respecting polarity (+ facing up). Close the compartment.
What tuning modes are available?
The Pitchstrap offers a chromatic mode, as well as specific modes for guitar, bass, and ukulele. You can switch between them by pressing the MODE button.
How to calibrate the reference pitch (A4)?
Press and hold the MODE button for 3 seconds. The display flashes. Use the arrows to adjust the frequency from 430 to 450 Hz. The default value is 440 Hz.
Why doesn't the screen turn on?
Check that the battery is correctly installed and not discharged. Replace it if necessary. Also make sure the clip is properly closed to activate the contact.
How to clean the Pitchstrap?
Use a soft, dry cloth to wipe the device. Do not use chemical products or water, as this could damage the internal components.
Does the Pitchstrap work with an electric guitar?
Yes, it works with electric guitars, acoustic guitars, basses, ukuleles, and other string instruments. It detects vibrations via the clip attached to the instrument's headstock.
What to do if the tuner does not detect sound?
Make sure the clip is firmly attached to the instrument and that it produces a clear sound. The tuner uses vibrations, so ambient volume does not affect detection. Check that the battery is sufficiently charged.
How to change the battery?
Open the battery compartment cover with a Phillips screwdriver. Remove the used battery and insert a new CR2032 battery respecting polarity. Close the cover until it clicks.
Is there an auto-off function?
Yes, the Pitchstrap automatically turns off after approximately 5 minutes of inactivity to save battery. You can turn it back on by pressing any button.
Can the Pitchstrap be used for a violin?
Yes, it works on any string instrument. However, for fragile instruments like the violin, attach the clip with caution to avoid damaging the headstock.
User questions about Pitchstrap KORG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Pitchstrap - KORG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pitchstrap by KORG.
USER MANUAL Pitchstrap KORG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KORG
Model : Pitchstrap
Category : Uncategorized