WGCXL112FEG - Electrical switch HAGER - Free user manual and instructions
Find the device manual for free WGCXL112FEG HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Electrical Control Device |
| Brand | Hager |
| Model | WGCXL112FEG |
| Series | WGC |
| Dimensions (Width x Height x Depth) | 72 x 85 x 65 mm (4 modules width) |
| Weight | 0.15 kg |
| Rated Voltage | 230 V AC |
| Rated Current | 16 A |
| Frequency | 50/60 Hz |
| Mounting Type | DIN rail (EN 60715) |
| Protection Degree | IP20 |
| Operating Temperature Range | -25°C to +55°C |
| Material | Thermoplastic, self-extinguishing |
| Color | White |
| Compliance Standards | EN 60898-1, IEC 60898-1 |
| Main Function | Overload and short-circuit protection |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety Notes | Installation and maintenance must be carried out by a qualified electrician. Disconnect power before servicing. |
| Spare Parts / Repairability | Not user-serviceable. Replace entire unit if defective. |
| Warranty | Standard manufacturer warranty (typically 2 years) |
Frequently Asked Questions - WGCXL112FEG HAGER
What is the Hager WGCXL112FEG?
The Hager WGCXL112FEG is a modular electrical control device designed for DIN rail mounting, providing overload and short-circuit protection in electrical distribution boards.
What is the rated current of this device?
The rated current is 16 A at 230 V AC.
Can I install the WGCXL112FEG myself?
Installation should be performed by a qualified electrician following local electrical regulations. Always disconnect the power supply before working on the device.
What is the width of the device in modules?
It occupies 4 DIN modules (each module is 18 mm wide), so the total width is 72 mm.
Is the WGCXL112FEG compatible with other Hager enclosures?
Yes, it is designed to fit standard DIN rail enclosures from Hager and other brands that comply with EN 60715.
What protection does the device offer?
It provides overload and short-circuit protection for downstream circuits. It is a circuit breaker (MCB) with a type C or B tripping curve (check model variant).
What is the IP rating?
The device has an IP20 degree of protection, meaning it is protected against solid objects larger than 12.5 mm but not against water ingress.
How do I clean the WGCXL112FEG?
Clean the exterior with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
Are there any troubleshooting tips if the device trips frequently?
Frequent tripping may indicate overload, short circuit, or a faulty appliance. Check connected loads and wiring. If the problem persists, consult an electrician.
Where can I find the user manual for this device?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version via email.
User questions about WGCXL112FEG HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electrical switch in PDF format for free! Find your manual WGCXL112FEG - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WGCXL112FEG by HAGER.
USER MANUAL WGCXL112FEG HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : WGCXL112FEG
Category : Electrical switch