H8I HT59 LS UK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free H8I HT59 LS UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Hotpoint |
| Model | H8I HT59 LS UK |
| Dimensions (H x W x D) | 85 cm x 60 cm x 58 cm |
| Weight | Approximately 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | E (EU 2019/2017) |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Programs | Eco, Intensive, Normal, Quick, Pre-wash |
| Temperature Settings | 40°C, 50°C, 60°C, 70°C |
| Water Consumption per Cycle | 10.5 L (Eco) |
| Energy Consumption per Cycle | 0.95 kWh (Eco) |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Overflow Protection | Yes (Aqua Stop) |
| Self-Cleaning Filter | Yes |
| Salt and Rinse Aid Indicators | Yes |
| Interior Light | Yes |
| Adjustable Racks | Yes |
| Cutlery Basket | Yes |
| Spare Parts Availability | Available through Hotpoint service |
Frequently Asked Questions - H8I HT59 LS UK HOTPOINT
How do I install the dishwasher?
Ensure the appliance is level and connect to power and water supply. For detailed steps, refer to the installation manual.
How do I select a washing program?
Press the program button repeatedly until the desired cycle (Eco, Intensive, etc.) is selected. Press Start. Refer to the control panel section for details.
What should I do if the dishwasher does not start?
Check that the door is fully closed, the power cord is plugged in, and the water supply is on. Also ensure no error code is displayed. Restart after troubleshooting.
How do I clean the filters?
Remove the lower rack, rotate the filter assembly, and rinse under running water. Clean the fine filter and replace. Perform monthly cleaning for best results.
Why is there water left at the bottom after a cycle?
This may indicate a blocked filter or drain hose. Clean the filters and check the drain hose for kinks. If persists, contact support.
How do I adjust the rinse aid dosage?
Open the rinse aid compartment and turn the dial (1-6) to adjust. Higher settings for more drying. Use quality rinse aid to avoid spots.
What can I do if dishes are not drying properly?
Ensure rinse aid is refilled and heat dry option is active. Arrange dishes for proper airflow. Use a higher temperature program if needed.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the indicator lights up. Repeat to deactivate. It prevents accidental operation.
What type of detergent should I use?
Use dishwasher detergent (tablets, powder, or gel). Avoid hand-washing liquid. For best results, also add rinse aid and salt.
Where can I purchase spare parts?
Contact Hotpoint customer service or visit authorized dealers. Genuine parts ensure safety and performance.
User questions about H8I HT59 LS UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual H8I HT59 LS UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H8I HT59 LS UK by HOTPOINT.
USER MANUAL H8I HT59 LS UK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : H8I HT59 LS UK
Category : Dishwasher