WTV 8633 XS0 - Washing machine BEKO - Free user manual and instructions
Find the device manual for free WTV 8633 XS0 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Beko |
| Model | WTV 8633 XS0 |
| Capacity (kg) | 8 |
| Maximum Spin Speed (rpm) | 1400 |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption (kWh) | 190 |
| Annual Water Consumption (L) | 9900 |
| Noise Level - Washing (dB) | 52 |
| Noise Level - Spinning (dB) | 74 |
| Dimensions (H x W x D) mm | 850 x 600 x 450 |
| Depth with Door Open (mm) | 950 |
| Net Weight (kg) | 60 |
| Power Supply (V/Hz) | 220-240 / 50 |
| Motor Type | ProSmart Inverter |
| Display Type | LED |
| Number of Programs | 15 |
| Special Programs | Cottons, Synthetics, Delicates, Wool, Hand Wash, Quick 14 min, Mixed, Daily Xpress, Drum Clean, Rinse & Spin, Spin & Drain, Stain Removal |
| Child Lock | Yes |
| Delay Start (hours) | Up to 24 |
| Self-Cleaning Technology | Hygiene+ (Steam) |
| Spare Parts Availability | Available online and through authorized service |
| Repairability Index | 8.2/10 |
Frequently Asked Questions - WTV 8633 XS0 BEKO
How do I clean the filter in my Beko WTV 8633 XS0?
Turn off the machine and unplug it. Open the filter cover at the bottom front, place a towel, unscrew the filter, remove lint, then screw back and close the cover. Check the pump hose for debris.
What detergent should I use for this washing machine?
Use high-efficiency (HE) detergents for front-loaders. For best results, refer to the program guide in the manual. Avoid using too much detergent to prevent oversudsing.
How do I activate the child lock?
Press and hold the 'Child Lock' button (usually a padlock icon) for 3 seconds until the lock symbol appears on the display. To deactivate, repeat the same.
What does the 'Hygiene+' program do?
The Hygiene+ program uses steam and high temperature to eliminate bacteria and allergens, ideal for baby clothes or towels. It also helps clean the drum.
How can I reduce the spin speed?
Select a program and before starting, press the 'Spin Speed' button to choose a lower rpm (e.g., 800 or 1000). You can also select 'No Spin' for delicate items.
Why is my washing machine not draining properly?
Check if the drain hose is kinked or blocked. Clean the filter as described above. If the problem persists, the drain pump might be faulty.
Can I pause a cycle to add clothes?
Yes, press the 'Start/Pause' button. If the water level is low enough, you can open the door. After adding clothes, press 'Start/Pause' again to resume.
What are the most common error codes?
E01: Door lock issue. E05: Water inlet problem. E06: Drainage error. E12: Water overflow. Refer to the manual for full list and troubleshooting.
How do I clean the detergent drawer?
Press the release lever inside the drawer, pull it out, rinse under warm water, and use a brush to clean the compartments. Wipe dry before reinserting.
Is the Beko WTV 8633 XS0 suitable for built-in installation?
No, this model is freestanding only. It requires clearance on all sides for ventilation and access. Do not install behind a closed door.
User questions about WTV 8633 XS0 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WTV 8633 XS0 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WTV 8633 XS0 by BEKO.