B3T60230 - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free B3T60230 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Beko |
| Model | B3T60230 |
| Installation Type | Freestanding |
| Capacity | 8 kg |
| Energy Class | B (prior A++ equivalent) |
| Annual Energy Consumption | 561 kWh (typical) |
| Drying Type | Condenser (ventless) |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
| Weight | 50 kg |
| Power Consumption (off mode) | 0.5 W |
| Noise Level | 65 dB(A) |
| Drum Material | Stainless Steel |
| Number of Programs | 15 |
| Programs Include | Cotton, Synthetics, Delicates, Mix, Wool, Sport, Shirts, Jeans, Quick Dry, Hygiene, Eco, etc. |
| Filter Indicator | Yes |
| Water Tank Location | Top right (pull-out) |
| Condenser Cleaning | Yes, accessible via front flap |
| Child Lock | Yes |
| Reversible Door | Yes |
| Safety Features | Overheating protection, child lock, door lock |
| Spare Parts Availability | Beko authorized service centers |
| Repair Index (France) | 8.0 / 10 (typical) |
Frequently Asked Questions - B3T60230 BEKO
How do I clean the fluff filter?
Open the door, pull the filter up from the door opening, remove lint with your fingers or a soft brush, and rinse under running water if needed. Dry it completely before reinserting.
How often should I clean the condenser?
Every 6 months or when the 'Condenser Clean' indicator lights up. Remove the condenser unit from the bottom front flap, rinse with water, and allow to dry before reinstalling.
What does the 'Water Tank Full' indicator mean?
The water collection tank is full; pull out the tank from the top right and empty it, then slide back in. The indicator will turn off.
How can I change the door opening direction?
Turn off and unplug the dryer. Remove the door hinge screws, swap the door, and reattach on the opposite side. Refer to the manual for detailed steps.
What is the correct way to install the dryer?
Place on a solid level floor, keep at least 10 cm clearance on all sides, connect the drain hose if using continuous drain, and plug into a grounded outlet. Do not install in freezing temperatures.
How do I reset the dryer after an error?
Turn the program dial to the 'Off' position, wait 2 minutes, then turn to a new program and press Start. If the error persists, consult the manual or call service.
What do the symbols on the control panel mean?
Common symbols: Fluff Filter (mushroom), Water Tank (wave), Condenser Clean (wavy line), Delay Timer (clock), Child Lock (padlock). Refer to the manual for all symbols.
How do I activate the child lock?
Press and hold the 'Child Lock' button for 3 seconds until the lock icon appears on the display. Repeat to deactivate.
What is the maximum capacity for each program?
Cotton/Synthetics: full load (8 kg), Delicates: 2 kg, Wool: 1 kg, Quick Dry: 1 kg. Overloading may cause poor drying.
Can I connect the dryer to a drain instead of using the water tank?
Yes, use the included drain hose. Remove the plug from the back, attach the hose, and route it to a drain no higher than 1 meter from the floor.
User questions about B3T60230 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual B3T60230 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B3T60230 by BEKO.
USER MANUAL B3T60230 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : B3T60230
Category : Tumble drier