HT320S - Hedge Trimmers Shindaiwa - Free user manual and instructions
Find the device manual for free HT320S Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hedge trimmer |
| Brand | Shindaiwa |
| Model | HT320S |
| Blade length | 600 mm |
| Tooth pitch | 35 mm |
| Weight (without fuel) | 5.2 kg |
| Engine type | 2-stroke, single cylinder |
| Displacement | 21.7 cm³ |
| Power | 0.75 kW |
| Fuel | Gasoline-oil mixture (50:1) |
| Tank capacity | 0.4 L |
| Sound pressure level (LpA) | 91 dB(A) |
| Sound power level (LWA) | 102 dB(A) |
| Vibration level (front handle) | 8.0 m/s² |
| Vibration level (rear handle) | 7.5 m/s² |
| Ignition | Electronic (CDI) |
| Carburetor | Diaphragm with choke |
| Anti-vibration system | Yes, 4-point suspension |
| Blade guard | Included |
| Maintenance | Clean after each use, regular sharpening, replace spark plug and air filter |
| Safety | Safety trigger, emergency stop, anti-start protection |
| Spare parts and repairability | Available via Shindaiwa network, repairability index 7.8/10 |
Frequently Asked Questions - HT320S Shindaiwa
What type of fuel to use for the Shindaiwa HT320S?
Use a mixture of unleaded gasoline (95 or 98) and high-quality 2-stroke oil, in a 50:1 ratio (1 L of gasoline for 20 ml of oil). Strictly respect this ratio to avoid damaging the engine.
How to start the HT320S hedge trimmer?
1. Set the switch to 'I'. 2. Activate the choke (closed position). 3. Pump the primer bulb until you see fuel. 4. Pull the starter cord slowly until you feel resistance, then pull sharply. 5. Once the engine starts, gradually open the choke. Do not pull fully continuously.
What is the blade length of the HT320S?
The blade is 600 mm (about 24 inches) with a tooth pitch of 35 mm. It can cut branches up to 20 mm in diameter.
How to clean the blades after use?
After each use, clean the blades with a stiff brush and soapy water. Do not use solvents. Dry thoroughly and apply an anti-rust lubricant (oil or spray).
When should the blades be sharpened?
Sharpen the blades as soon as cutting becomes less clean or branches are crushed. Use a flat file suitable for the 35 mm tooth pitch. Always sharpen both sides evenly.
What to do if the engine does not start?
Check: 1. Fuel level. 2. Spark plug (clean, gap 0.6 mm). 3. Air filter (clean). 4. Choke (correct position). If the problem persists, consult an authorized Shindaiwa repairer.
What oil to use for the 2-stroke mixture?
Use a high-quality 2-stroke oil, preferably Shindaiwa Premium 2-Stroke Oil or an equivalent oil certified JASO FD or ISO-L-EGD. Never use 4-stroke engine oil.
How to adjust the carburetor?
The carburetor is pre-set at the factory. If adjustment is necessary, turn the idle (T) and mixture (H and L) screws with a screwdriver. Preferably entrust this adjustment to a professional to avoid damage.
What safety equipment to wear?
Always wear: hearing protection, safety glasses, gloves, safety shoes, and cut-resistant trousers. Avoid loose clothing. Use the provided harness.
Where to find spare parts for the HT320S?
Spare parts are available at authorized Shindaiwa dealers or on the official website. Common parts (spark plug, filter, blade) are easy to find. The repairability index is 7.8/10, which is good.
User questions about HT320S Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hedge Trimmers in PDF format for free! Find your manual HT320S - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT320S by Shindaiwa.
USER MANUAL HT320S Shindaiwa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Shindaiwa
Model : HT320S
Category : Hedge Trimmers