S-Force S - Vacuum Cleaner GORENJE - Free user manual and instructions

Find the device manual for free S-Force S GORENJE in PDF.

GORENJE S-Force S - Vacuum Cleaner
📄 100 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice GORENJE S-Force S - page 20
20 / 100
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Bagless Cylinder Vacuum Cleaner
Brand Gorenje
Model S-Force S
Dimensions (L x W x H) 40 x 25 x 30 cm
Weight 4.5 kg
Power Consumption 700 W
Suction Power 250 Air Watts
Dust Container Capacity 1.5 L
Filtration System HEPA 13 washable filter
Bagless Yes, cyclonic technology
Cord Length 5 m
Operating Radius 8 m
Noise Level 75 dB
Attachments Included Floor nozzle, crevice tool, dusting brush, upholstery tool
Adjustable Suction Power Yes, electronic control on handle
Automatic Cord Rewind Yes
Maintenance Empty container after each use; wash filter every 3 months
Safety Features Thermal overload protection, motor protection filter
Repairability Spare parts available online; brush roller and filters replaceable
Warranty 2 years standard

Frequently Asked Questions - S-Force S GORENJE

How do I empty the dust container?
Press the release button on top of the container and pull it out. Hold the container over a bin, press the bottom latch to open, and empty the contents. Avoid inhaling dust.
How often should I wash the HEPA filter?
We recommend washing the HEPA filter every 3 months or when the suction noticeably decreases. Wash with lukewarm water, let it dry completely for 24 hours before reinserting.
What should I do if the vacuum loses suction?
First, check if the dust container is full or the filter is clogged. Clean the filter and empty the container. Also inspect the hose and nozzle for blockages. If the problem persists, check for a worn brush roller.
Can I use the vacuum on hardwood floors?
Yes, the included floor nozzle has a brush mode for hard floors. Ensure the brush is set to the appropriate height to avoid scratching. You can also turn off the rotating brush for delicate surfaces.
Does the vacuum have a HEPA filter?
Yes, the Gorenje S-Force S is equipped with a washable HEPA 13 filter that captures 99.95% of particles, including allergens and fine dust.
How do I replace the brush roller?
Unplug the vacuum. Turn the floor nozzle over, locate the release tabs on both ends of the brush roller, press them, and slide out the old roller. Insert the new roller until it clicks into place.
What is the maximum noise level?
The vacuum operates at a noise level of approximately 75 dB, which is comparable to a normal conversation. Using the electronic suction control on lower settings reduces noise further.
Why does the vacuum turn off suddenly?
This is likely due to thermal overload protection. If the vacuum overheats (e.g., from a blocked hose), it automatically shuts off. Unplug the unit, check for blockages, clean the filter, and let it cool for 30 minutes before restarting.
Can I use the vacuum without the filter?
No, never operate the vacuum without a filter. The motor can be damaged and dust may escape into the air. Always ensure the HEPA filter and motor protection filter are installed correctly.
Where can I order spare parts?
Spare parts such as filters, brush rollers, and nozzles are available on the Gorenje official website or through authorized retailers. Check the manual for part numbers.

User questions about S-Force S GORENJE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual S-Force S - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-Force S by GORENJE.

USER MANUAL S-Force S GORENJE

S·FORCES

Technical diagram of a vacuum cleaner with labeled parts 1, 2, 3, and 4

Two 3D mechanical parts with arrows indicating dimensions (no text or symbols)

Technical line drawing of a mechanical component with a cylindrical part and a rectangular base (no text or symbols)

SI Navodila za uporabo....4

EN Instruction manual....20

Power button

Cable rewind button

Diagram illustrating window and door fixture placement with checkmarks indicating replacement or status indicators

Diagram illustrating water droplet contact and stroke technique with labeled diagrams and directional arrows

STORAGE

Switch off the appliance. // Remove the mains plug from the wall socket. // Wind the mains cable back into the appliance by pressing the cable rewind button. // Attach the lower hose to the vacuum cleaner.

TROUBLESHOOTING

Insufficient suction power?

Check the dust bag (dust container) and empty it. // Check whether the nozzle or any of the hoses is blocked. // Remove the obstruction and let air through the hose in the opposite direction.

IMPORTANT SAFETY PRECAUTIONS

To connect the suction hose: insert the suction hose into the opening.

To disconnect the suction hose: press the buttons on both sides of the suction hose and pull it out.

Diagram illustrating window and door fixture placement with checkmarks indicating status or modification

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, accompanied by three symbolic diagrams below.

Optional accessories for upgraded version

Line drawings of four different mechanical or laboratory devices with no visible text or symbols.

GORENJE S-Force S - IMPORTANT SAFETY PRECAUTIONS - 4

GORENJE S-Force S - IMPORTANT SAFETY PRECAUTIONS - 5

Diagram illustrating a step-by-step process of device placement or assembly, showing an arrow indicating the direction of movement.

Please note that the lid cannot be closed if the dust bag is not inserted.

Replacing the dust bag / Replacing the inlet filter

GORENJE S-Force S - Replacing the dust bag / Replacing the inlet filter - 1

GORENJE S-Force S - Replacing the dust bag / Replacing the inlet filter - 2

Diagram illustrating a device being processed from a battery into a container, with arrows indicating the process.

Please note that it is not possible to close the lid if the dust bag is not inserted.

Replacing the outlet filter

Remove the holder. // Properly insert the bottom edge of the new filter into the grooves of the holder. // Close the holder by gently pressing it into place. Make sure the filter fits completely into the holder.

GORENJE S-Force S - Replacing the outlet filter - 1

GORENJE S-Force S - Replacing the outlet filter - 2

GORENJE S-Force S - Replacing the outlet filter - 3

GORENJE S-Force S - Replacing the outlet filter - 4

GORENJE S-Force S - Replacing the outlet filter - 5

STORAGE

Turn off the appliance. // Unplug from the wall outlet. // Wind the power cord by pressing the cord rewind button. // Attach the lower tube to the vacuum cleaner.

TROUBLESHOOTING

Insufficient suction power?

Check the dust bag (or dust container) and empty it. // Check if the nozzle, tube, or hose is blocked. // Remove any obstructions and allow air to pass through the hose and/or tube in the opposite direction.

IMPORTANT SAFETY INSTRUCTIONS

STORAGE

IMPORTANT SAFETY INSTRUCTIONS

When using the vacuum cleaner, always observe the following basic safety precautions: Carefully read this instruction manual and only use the appliance in accordance with the instructions herein. Before using the appliance, carefully assemble all of its parts. Only use the appliance with the parts recommended by the manufacturer. Never leave the appliance unattended during use. Before connecting the appliance to the power mains, make sure the specified voltage matches the voltage of the power mains in your home. If the power cord is damaged, replace it with a suitable power cord or a power cord reel assembly. The power cord or the power cord reel assembly may only be replaced by Gorenje, Gorenje's authorized service and repair centre, or an adequately trained professional. Only use and keep the appliance in dry indoor areas and out of reach of children. Do not use the appliance if it has been dropped, if it is damaged, if it has been kept outdoors, or if it has been dropped or immersed in water. Do not use the appliance with an unsuitable attachment or extension. To prevent injury, make sure your hair, loose parts of your garments, fingers or other parts of the body do not come into contact with the vents or moving parts of the appliance. This appliance may be used by children aged 8 years or more, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they are supervised during the use of the appliance or if they have been provided relevant instructions regarding the use of the appliance in a safe way, and they understand the hazards involved. Keep children under supervision while they are using the appliance and make sure they do not play with it. Children should not perform any cleaning or maintenance tasks on the appliance, unless they are at least 8 years old and they do so under supervision. Do not leave the appliance unattended while it is connected to the power mains. After use or during maintenance, put down the appliance, switch it off, and unplug the power cord from the electrical outlet. Never unplug the appliance by pulling on the power cord. The appliance is only intended for household use.

DANGER

Do not immerse the appliance in water or any other liquid, and do not rinse it under running water. Also, do not touch the power cord or the plug with wet hands.

SPECIAL WARNINGS

Always switch off the appliance before attaching or replacing the suction tube, suction hose or attachments. Never use the vacuum cleaner without a bag or the cyclone dust bin (depending on the vacuum cleaner type), or without inlet and exhaust filters. Keep the vents free from dust, hair or any other impurities that could clog the vents, decrease the air flow and reduce suction power. Do not move the vacuum cleaner across the room by pulling by the power cord or the suction hose. Protect the power

Keep the cord away from hot surfaces and check it for any damage, avoiding kinks. When using the automatic cord reel, guide the cord with your hand. For extended use, unwind at least two-thirds of the cord to prevent overheating and damage. If using the vacuum for several hours, fully unwind the cord. Keep the suction tube, the appliance's open parts, and attachments away from your face and body. Never use the vacuum to pick up embers, filings, cigarette butts, matches, liquids (like carpet cleaning foam), or sharp or pointed objects (such as broken glass). Also, avoid picking up toner dust or construction materials (like fine sand, lime, or cement powder), as these can damage the appliance. Be extra cautious when cleaning stairs.

The appliance complies with the following European directives: 2014/35/EU; 2014/30/EU; 2009/125/EC; 2011/65/EU; and 666/2013/EU (EU model).

ENVIRONMENT

After its useful life, do not dispose of the appliance with regular household waste. Instead, take it to an authorized recycling center to help protect the environment.

This equipment is labeled in accordance with European Directive 2012/19/EC on waste electrical and electronic equipment (WEEE). This directive sets out the requirements for collecting and managing such waste across the European Union.

WARRANTY AND REPAIR

For more information or if you encounter problems, contact the Gorenje Call Centre in your country (the phone number is listed on the International Warranty Sheet). If there is no such centre in your country, contact your local Gorenje dealer or Gorenje's small domestic appliance department.

For personal use only!

GORENJE WISHES YOU A LOT OF PLEASURE USING YOUR VACUUM CLEANER

For easier transport, some appliance parts have been packed separately and placed safely in the main packaging unit.

Before first use, read and follow the assembly and safety instructions. The appliance is intended for household use, specifically for dry vacuum cleaning.

APPLIANCE PARTS

1 Vacuum cleaner

2 Suction tube

3 Telescopic tube

4 Floor brush

5 Crevice nozzle

6 Dust nozzle

Additional nozzles

APPLIANCE ASSEMBLY

Line drawing of a vacuum cleaner with handle and arm (no text or symbols).

To connect the suction hose: insert the suction hose into the opening.

To disconnect the suction hose: press the buttons on both sides of the suction hose and pull it out.

Connect the tube to the handgrip

Attach the floor brush to the tube

On/Off button

Cord rewind button

Sliding knob for speed regulation

USING THE VACUUM CLEANER

Technical line drawings of a vacuum cleaner with attached components and directional arrows (no text or symbols).

Diagram illustrating window and door layout with icons for furniture, fixtures, and lighting options.

Diagram illustrating a mechanical or fluidic process with directional arrows and three labeled diagrams (1, 2, 3) showing different states.

Optional accessories for upgraded version

Spinner / dust container

GORENJE S-Force S - USING THE VACUUM CLEANER - 4

GORENJE S-Force S - USING THE VACUUM CLEANER - 5

GORENJE S-Force S - USING THE VACUUM CLEANER - 6

GORENJE S-Force S - USING THE VACUUM CLEANER - 7

GORENJE S-Force S - USING THE VACUUM CLEANER - 8

BAGS, DUST CONTAINER AND FILTERS

Cleaning the dust container

If you use a dust container instead of a paper dustbag, this can be used and emptied repeatedly. When the 'dust container full' indicator reaches the middle of the window, clean the dust container. // Do not use a washing machine to rinse filters. // Harsh or abrasive detergent will damage the outer surface. You can empty the dust container in the following ways: Hold the dust container over a dustbin. Open the dust container // Shake the contents of the dustbag into the dustbin. // Close the dust container.

Four line drawings of laboratory glassware or equipment, including a conical tube and three cylindrical containers (no text or symbols).

Replacing bags / Replacing the inlet filter

In the case of dustbags, they should be replaced once full. // Open the cover (by pressing the button). // Remove the dustbag holder. // Remove the full dustbag. // Insert a new dustbag into the dustbag holder. // Insert the dustbag holder into the lowerhousing. // Close the lid (you will hear a 'click') Replace the motor protection filter when inserting the first of a new set of dustbags.

Diagram showing a robotic vacuum cleaner's internal components and its assembly process, with Chinese annotations.

Note that it is not possible to close the cover if no dustbag has been inserted

Replacing the outlet filter

Remove the holder. // Insert the bottom edge of the new filter properly into the ridges of the holder. // Close the holder by pressing it back into place gently. Make sure that the filter fits completely into the holder.

graph LR A["Heating Device"] --> B["Recycling Box"] B --> C["Recycling Box with Waste Bin"] C --> D["Recycling Box with Waste Bin"]

STORAGE

Switch the appliance off. // Remove the mains plug from the wall socket. // Rewind the mains cord by pressing the cord rewind button. // Attach the lower tube to the vacuum cleaner.

TROUBLESHOOTING

Insufficient suction power?

Check the dustbag (or dust container) and empty it. // Check if the nozzle, tube or hose is blocked. // Remove any obstructions and let the air flow through the hose and/or tube in the opposite direction.

On/Off button

Cord rewind button

Line drawings of four different mechanical or laboratory devices, possibly a pen or tool, with no visible text or symbols.

STORAGE

Diagram illustrating window and door layout with icons for furniture, lighting, and car use.

Diagram illustrating a mechanical or fluidic process with labeled components and directional arrows, accompanied by three symbolic diagrams.

STORAGE

Connecting the suction hose: Insert the suction hose into the opening.

Disconnecting the suction hose: Press the buttons on both sides of the suction hose and pull it out.

On/off button

Diagram illustrating household cleaning and ventilation system with icons for lighting, fixtures, and equipment

STORAGE

On/off button

Diagram illustrating a household ventilation system with icons for lighting, ventilation, and heating elements.

GORENJE S-Force S - STORAGE - 2

GORENJE S-Force S - STORAGE - 3

Diagram illustrating a medical procedure involving a device and granular material, with arrows indicating progression.

STORAGE

On/off button

Cable rewind button

Diagram illustrating household cleaning and ventilation system with icons for lighting, fixtures, and equipment.

BAGS, DUST CONTAINERS AND FILTERS

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 1

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 2

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 3

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 4

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 5

Line drawing of a vacuum cleaner with handle and control panel (no text or symbols).

Diagram illustrating window and door cleaning methods with icons for lighting, surface finish, and cleaning techniques.

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 8

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 9

Diagram illustrating a step-by-step process of adding granular material into a container, with arrows indicating progression.

Diagram illustrating household cleaning and ventilation methods with icons for lighting, fixtures, and water drop options.

Optional accessories for upgraded version

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 12

Illustration showing a device being processed from a container, with no visible text or symbols.

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 14

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 15

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 16

GORENJE S-Force S - BAGS, DUST CONTAINERS AND FILTERS - 17

STORAGE

STORAGE

GORENJE S-Force S - STORAGE - 1

Illustration showing two steps of a device being placed on a surface, with no visible text or symbols.

Diagram illustrating household cleaning and ventilation methods with icons for lighting, ventilation, and fixtures.

Technical line drawings of four mechanical components or devices, no text or symbols present.

CAKTAY

On/off button

GORENJE S-Force S - CAKTAY - 1

GORENJE S-Force S - CAKTAY - 2

GORENJE S-Force S - CAKTAY - 3

Four line drawings of laboratory glassware and equipment, including a pen-like device with a probe and a test tube (no text or labels)

STORAGE

STORAGE OF THE APPLIANCE

Line drawing of a vacuum cleaner with attached tubing (no text or symbols)

On/off button

Diagram illustrating household cleaning and ventilation system with icons for lighting, ventilation, and fixtures

Accessories for upgraded version

Spindle / dust container

GORENJE S-Force S - STORAGE OF THE APPLIANCE - 3

GORENJE S-Force S - STORAGE OF THE APPLIANCE - 4

GORENJE S-Force S - STORAGE OF THE APPLIANCE - 5

GORENJE S-Force S - STORAGE OF THE APPLIANCE - 6

GORENJE S-Force S - STORAGE OF THE APPLIANCE - 7

BAGS, DUST CONTAINER AND FILTERS

STORAGE

On/off button

Diagram illustrating window and door layout with icons for lighting, furniture, and fixtures.

Diagram illustrating a mechanical or fluid system with labeled components and directional arrows, accompanied by three schematic diagrams below.

STORAGE

On/off button

Diagram illustrating household cleaning and ventilation system with icons for lighting, drying, and heating elements.

STORAGE

USE OF THE VACUUM CLEANER WITH CORD

Diagram showing three steps of a device panel with buttons and labels, likely illustrating a process or assembly.

On/off button

USE OF THE VACUUM CLEANER WITH CORD

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 1

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 2

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 3

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 4

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 5

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 6

Simple line drawing of a mechanical component with a cylindrical shaft and a base.

Centrifuge / dust bin

GORENJE S-Force S - USE OF THE VACUUM CLEANER WITH CORD - 8

CLEANING, DUST BIN AND FILTERS

STORAGE

On/off button

Diagram illustrating window and door layout with icons for lighting, furniture, and fixtures.

Diagram illustrating a mechanical or fluid system with directional arrows and three labeled diagrams (1, 2, 3) showing different configurations.

Rotating brush / dust container

GORENJE S-Force S - STORAGE - 3

BAGS, DUST CONTAINER AND FILTERS

Changing bags / Changing the inlet filter

STORAGE

Rotating part / dust container

GORENJE S-Force S - STORAGE - 1

BAGS, DUST CONTAINER AND FILTERS

STORAGE

On/off button

Diagram illustrating window and door cleaning techniques with icons for lighting, surface finish, and car repair options.

GORENJE S-Force S - STORAGE - 2

Illustration showing a device being placed on a surface, with an arrow indicating upward motion (no text or symbols).

On/off button

Line drawings of four different mechanical components or devices, including a curved pipe and three cylindrical parts with internal features (no text or symbols).

STORAGE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : GORENJE

Model : S-Force S

Category : Vacuum Cleaner