Z-1000 III - Effect machine Antari - Free user manual and instructions
Find the device manual for free Z-1000 III Antari in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | Antari |
| Model | Z-1000 III |
| Heater Power | 1500 W |
| Voltage | AC 120 V / 240 V (50/60 Hz) |
| Fog Output | 30,000 cfm (approx.) |
| Heat-Up Time | Approx. 4 minutes |
| Fluid Consumption | 100 ml/min (max) |
| Tank Capacity | 5 L |
| Control | DMX, wired remote, and manual |
| Dimensions (L x W x H) | 520 x 265 x 235 mm |
| Weight | 14.5 kg |
| Construction | Metal body with carrying handle |
| Safety Features | Thermal fuse, overload protection |
| Cleaning & Maintenance | Regular cleaning with Antari fluid; avoid water or flammable liquids |
| Spare Parts & Repairability | heater, pump, thermal fuse, control board; serviceable by qualified technician |
| Recommended Fluid | Antari FLG or equivalent water-based fog fluid |
| General Info | Professional fog machine for events, stages, and theaters |
Frequently Asked Questions - Z-1000 III Antari
What type of fog fluid should I use with the Z-1000 III?
Use only water-based fog fluid designed for machines, such as Antari FLG. Avoid oil-based or flammable fluids as they can damage the machine and create safety hazards.
How long does the Z-1000 III take to heat up?
The heat-up time is approximately 4 minutes. The indicator light will turn from red to green when ready.
Can I control the Z-1000 III with DMX?
Yes, the Z-1000 III supports DMX control via a standard 3-pin XLR connector. You can also use the included wired remote or manual controls.
What is the maximum output of the Z-1000 III?
It produces up to 30,000 cubic feet per minute (cfm) of fog, suitable for large venues.
How do I clean the Z-1000 III?
Regularly run a solution of distilled water and Antari cleaning fluid through the system. Do not use tap water or harsh chemicals.
What does the thermal fuse do?
The thermal fuse cuts power if the heater overheats, preventing damage and fire risk. If blown, it must be replaced by a qualified technician.
Can I use the Z-1000 III outdoors?
Yes, but avoid rain or direct moisture. The machine is designed for indoor use; outdoor use requires protection and wind may dissipate fog quickly.
What is the fluid capacity of the tank?
The tank holds 5 liters of fog fluid, providing extended runtime before refilling.
How do I replace a blown fuse?
Replace only with the same type and rating. Refer to the manual for the exact spec. Unplug the machine before replacing.
Is the Z-1000 III repairable?
Yes, many parts like heater, pump, and control board are replaceable. Contact Antari or an authorized service center for repairs.
User questions about Z-1000 III Antari
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Z-1000 III - Antari and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z-1000 III by Antari.
USER MANUAL Z-1000 III Antari
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Antari
Model : Z-1000 III
Category : Effect machine