NXL 14-A - Speaker RCF - Free user manual and instructions
Find the device manual for free NXL 14-A RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Loudspeaker (Active) |
| Woofer Size | 14 inches |
| Amplifier Power (Peak) | 1400 W |
| Amplifier Power (RMS) | 700 W |
| Frequency Response | 45 Hz - 20 kHz |
| Maximum SPL | 131 dB |
| Input Connectors | XLR/Jack Combo (Line/Mic) |
| Output Connectors | XLR Link Out |
| DSP Processing | Built-in with presets and EQ |
| Dimensions (H x W x D) | 690 x 430 x 450 mm |
| Weight | 20 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Enclosure Material | Polypropylene with metal grille |
| Rigging Points | M10 threaded inserts for mounting |
| Protection Features | Thermal, overload, and limiter protection |
| Cleaning Instructions | Wipe with a dry, lint-free cloth; do not use liquids |
| Safety Precautions | Place on stable surface; use grounded outlet; avoid moisture |
| Spare Parts Availability | Contact RCF service center for genuine parts |
Frequently Asked Questions - NXL 14-A RCF
How do I connect a microphone to the NXL 14-A?
Use an XLR cable to connect your microphone to the Combo Input (XLR/Jack). Ensure the input switch is set to Mic if available, and adjust the gain control accordingly.
Can I use the NXL 14-A as a floor monitor?
Yes, the NXL 14-A can be placed on its side as a wedge monitor. Ensure the pole mount is not obstructed and use the EQ presets for monitor mode if available.
What is the maximum power output of the NXL 14-A?
The peak power is 1400 W and the continuous RMS power is 700 W, delivered by a Class-D amplifier module.
How do I reset the DSP settings to factory defaults?
Press and hold the System button while powering on the unit, or navigate to the Factory Reset option in the menu. Consult the manual for exact steps.
Can I mount the NXL 14-A on a speaker stand?
Yes, it has a standard 36 mm pole mount on the bottom. Use a sturdy stand rated for the speaker’s weight (20 kg).
What should I do if there is no sound output?
Check power, signal cables, and that the power LED is on. Ensure the mute is not activated and that the input gain is turned up. Also verify the limiter/clip LED is not lit.
How do I clean the NXL 14-A?
Use a dry, lint-free cloth to wipe the enclosure. Do not use water, solvents, or abrasive cleaners. Keep the grille free of dust.
Is the NXL 14-A suitable for outdoor use?
It is designed for indoor use. If used outdoors, protect it from rain and direct sunlight. Do not expose to extreme temperatures or humidity.
How do I update the firmware?
Firmware updates are done via USB connection to a computer. Download the latest firmware from RCF’s website and follow the instructions provided with the update tool.
Where can I find replacement parts like a blown fuse?
Contact RCF service centers or authorized dealers for genuine spare parts. The fuse is located inside the power inlet module and should be replaced with the same rating.
User questions about NXL 14-A RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual NXL 14-A - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NXL 14-A by RCF.
USER MANUAL NXL 14-A RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : NXL 14-A
Category : Speaker