M4350-48G4XF - Switch NETGEAR - Free user manual and instructions
Find the device manual for free M4350-48G4XF NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch |
| Model | M4350-48G4XF |
| Ports | 48 x Gigabit Ethernet (10/100/1000) + 4 x 10G SFP+ |
| Form Factor | 19-inch rack-mountable 1U |
| Dimensions (W x D x H) | 440 mm x 400 mm x 44 mm |
| Weight | 5.0 kg |
| Power Supply | Built-in AC 100-240V, 50-60Hz |
| Power Consumption | 120W (max) |
| Layer Support | Layer 3 routing (static, RIPv1/v2, OSPF) |
| VLAN Support | Yes, up to 4096 VLANs |
| Quality of Service (QoS) | Yes, advanced QoS with 8 queues |
| Management | Web GUI, CLI (SSH/Console), SNMP |
| Cooling | Internal fans, side-to-side airflow |
| Environmental Operating Temperature | 0°C to 50°C |
| Cleaning | Use a dry, soft cloth. Do not use liquids or sprays. |
| Safety | Operate only with grounded outlet; keep away from moisture. |
| Spare Parts & Repairability | Contact Netgear support or authorized resellers for replacement parts. |
| Warranty | Limited Lifetime Warranty (check Netgear policy) |
| General Information | Designed for enterprise networks, managed via Netgear's NMS and web interface. |
Frequently Asked Questions - M4350-48G4XF NETGEAR
How do I reset the M4350-48G4XF to factory defaults?
Press and hold the Factory Reset button on the front panel for 10 seconds. The switch will reboot with default settings.
What is the default IP address of the switch?
The default management IP is 192.168.0.239 with subnet mask 255.255.255.0.
How do I access the web management interface?
Connect a computer to any port, set a static IP in the 192.168.0.x subnet, and browse to https://192.168.0.239. Default username is 'admin', password is 'password' (change after login).
What is the maximum power consumption of this switch?
The maximum power consumption is approximately 120W under full load, depending on connected devices.
Does the switch support PoE?
No, the M4350-48G4XF is a non-PoE switch. It provides standard Gigabit Ethernet connectivity without Power over Ethernet.
Can I rack-mount this switch?
Yes, it comes with rack-mount brackets for 19-inch racks. Use the provided screws and ensure proper ventilation.
What is the noise level of the fans?
The switch uses variable-speed fans. Under normal load, noise is around 45 dBA; it may increase under high temperature or traffic.
How do I configure VLANs?
Use the web interface under Switching > VLAN or via CLI commands. The switch supports 802.1Q VLAN tagging and up to 4096 VLANs.
What is the warranty period?
Netgear offers a Limited Lifetime Warranty for this model, with advanced replacement options if registered.
Where can I download the latest firmware?
Visit the Netgear Support website at https://www.netgear.com/support/product/M4350-48G4XF/ and download the latest firmware.
User questions about M4350-48G4XF NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual M4350-48G4XF - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4350-48G4XF by NETGEAR.
USER MANUAL M4350-48G4XF NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4350-48G4XF
Category : Switch