ACP-12DT35AERI/I3 - Air Conditioning Vivax - Free user manual and instructions
Find the device manual for free ACP-12DT35AERI/I3 Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split air conditioner |
| Brand | Vivax |
| Model | ACP-12DT35AERI/I3 |
| Cooling Capacity (BTU) | 12,000 BTU |
| Heating Capacity (BTU) | 12,000 BTU |
| Energy Efficiency Ratio (EER) | 3.5 |
| Power Supply | 220-240 V / 50 Hz |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (W x H x D) | 845 x 289 x 209 mm |
| Outdoor Unit Dimensions (W x H x D) | 770 x 555 x 300 mm |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 27 kg |
| Noise Level Indoor (Low/High) | 25 / 42 dB(A) |
| Noise Level Outdoor | 52 dB(A) |
| Operating Modes | Cool, Heat, Fan, Dry, Auto |
| Airflow Rate (Max) | 650 m³/h |
| Filter Type | Washable mesh filter |
| Timer | 24-hour on/off timer |
| Sleep Mode | Yes |
| Remote Control | Included |
| Energy Class (Cooling/Heating) | Cooling: A+, Heating: A+ |
| Warranty | 2 years |
| Repair and Spare Parts Availability | 7 years after purchase |
Frequently Asked Questions - ACP-12DT35AERI/I3 Vivax
How do I clean the air filter?
Turn off the unit and remove the filter from the indoor unit. Wash it with lukewarm water and mild detergent, then let it dry completely before reinstalling.
How do I set the timer?
Press the TIMER button on the remote control. Use the +/- buttons to set the desired on/off time. Confirm by pressing the button again.
What do error codes like E0 or F0 mean?
Error codes indicate specific issues. E0 often signals a sensor problem, while F0 may indicate a refrigerant leak. Refer to the manual for a full list.
Can I use the air conditioner during a thunderstorm?
It is recommended to disconnect the power during thunderstorms to avoid electrical surges and potential damage.
How often should I service the unit?
We recommend professional maintenance every 6 months to check refrigerant levels, clean coils, and ensure optimal performance.
What is the recommended room size for this AC?
This 12,000 BTU unit is suitable for rooms up to 25-30 m² (about 270-320 sq ft).
How do I switch between cooling and heating?
Press the MODE button on the remote control until the desired mode (Cool, Heat, Fan, Dry) is displayed. Wait a few seconds for the unit to respond.
Why is the unit not blowing cold air?
Check that the mode is set to Cool and the thermostat is set to a temperature lower than the room. Also, ensure the air filter is clean.
Does the unit have a sleep mode?
Yes, press the SLEEP button on the remote. It will gradually adjust the temperature for comfortable sleep and save energy.
What should I do if the remote control stops working?
First, replace the batteries. If it still doesn't work, try resetting by removing the batteries for 30 seconds. If the issue persists, contact support.
User questions about ACP-12DT35AERI/I3 Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual ACP-12DT35AERI/I3 - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACP-12DT35AERI/I3 by Vivax.
USER MANUAL ACP-12DT35AERI/I3 Vivax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivax
Model : ACP-12DT35AERI/I3
Category : Air Conditioning