FR26V2 - Circuit Breaker HAGER - Free user manual and instructions
Find the device manual for free FR26V2 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circuit Breaker |
| Brand | Hager |
| Model | FR26V2 |
| Rated Voltage | 230/400 V AC |
| Rated Current | 16 A |
| Breaking Capacity | 6 kA |
| Number of Poles | 1P+N |
| Tripping Curve | C |
| Frequency | 50/60 Hz |
| Operating Temperature | -25°C to +55°C |
| Protection Degree | IP20 (terminals), IP40 (front) |
| Max. Cable Cross-Section | 25 mm² |
| Width (in modules) | 1 module (18 mm) |
| Weight | Approx. 100 g |
| Mounting | DIN rail |
| Standards | IEC/EN 60898 |
| Maintenance | Clean with a dry cloth |
| Safety | Isolate power supply before working |
| Spare Parts & Repairability | Contact Hager or authorized distributor |
Frequently Asked Questions - FR26V2 HAGER
How do I install the Hager FR26V2 circuit breaker?
Mount the breaker on a DIN rail, ensuring it clicks into place. Connect the phase wire to the input (top) and the load to the output (bottom). For the neutral, connect to the N terminal if applicable. Tighten screws to the recommended torque (2 Nm).
What is the recommended wire size for the FR26V2?
The maximum cable cross-section is 25 mm² for solid or stranded wire. Use a wire strip length of 10-12 mm.
Can the FR26V2 be used for both overload and short-circuit protection?
Yes, it provides protection against overloads and short circuits according to curve C. The magnetic trip operates at 5-10 times the rated current.
What is the tripping characteristic of the FR26V2?
It has a C-curve, meaning the magnetic trip occurs between 5 and 10 times the rated current. This is suitable for general-purpose loads like lighting and sockets.
How do I reset the breaker after a trip?
First, identify and rectify the cause of the trip (overload or short circuit). Then, firmly push the toggle switch up to the ON position. If it trips again, consult an electrician.
Is the FR26V2 suitable for outdoor use?
It has an IP40 front protection, making it suitable for indoor use in dry environments. For outdoor or damp conditions, use an appropriate enclosure to maintain IP rating.
Does the FR26V2 require any maintenance?
Periodically check for dust accumulation and clean with a dry cloth. Ensure all connections are tight. No lubrication is needed.
What tools are needed for installation?
You will need a flathead screwdriver (size 1-2) for the terminals, a DIN rail mounting tool (optional), and a voltage tester to ensure power is off.
Can I replace an old breaker with the FR26V2?
Yes, if the electrical specifications (voltage, current, breaking capacity) match. Ensure the DIN rail width and module size are compatible (1 module). Always consult a qualified electrician.
Where can I find the user manual for the FR26V2?
The user manual can be downloaded for free from notice-facile.com in PDF format. It includes installation, operation, and safety instructions.
User questions about FR26V2 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Circuit Breaker in PDF format for free! Find your manual FR26V2 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FR26V2 by HAGER.
USER MANUAL FR26V2 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : FR26V2
Category : Circuit Breaker