36VCS2-34.1 - Saw STERWINS - Free user manual and instructions
Find the device manual for free 36VCS2-34.1 STERWINS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cordless circular saw |
| Brand | Sterwins |
| Model | 36VCS2-34.1 |
| Rated voltage | 36 V |
| Battery type | Lithium-ion (sold separately) |
| Blade diameter | 190 mm |
| Maximum cutting depth | 65 mm |
| No-load speed | 4500 rpm |
| Weight (without battery) | 4.5 kg |
| Dimensions (L x W x H) | 400 x 250 x 300 mm |
| Housing material | Aluminium |
| Parallel guide | Yes, included |
| Safety devices | Blade brake, spindle lock |
| Sound level (LpA) | 95 dB(A) |
| Maintenance | Clean regularly, check brushes |
| Spare parts | Blade, carbon brushes, guards available |
| Repairability | Repairability index: 7.5/10 |
Frequently Asked Questions - 36VCS2-34.1 STERWINS
How to change the blade on the Sterwins 36VCS2-34.1 saw?
First ensure the battery is removed. Use the supplied wrench to loosen the blade locking screw. Lock the spindle with the locking button, then turn the screw clockwise to remove the flange and blade. Install the new blade respecting the rotation direction, then tighten firmly.
What type of battery is compatible with this model?
The saw uses a 36V Lithium-ion battery from the Sterwins range. Compatible 36V batteries are models BC36-4.0 and BC36-5.0. Do not use other voltages.
How to adjust the cutting depth?
Loosen the depth adjustment lever located on the side of the base plate. Slide the base plate up or down to the desired depth, then retighten the lever. Check that the blade does not protrude more than 5 mm below the workpiece.
Does the saw have a blade brake?
Yes, the 36VCS2-34.1 model is equipped with an electric blade brake that stops the blade within a few seconds after releasing the trigger. This improves safety.
What are the essential safety precautions?
Always wear safety glasses, gloves, and hearing protection. Do not wear loose clothing. Ensure the workpiece is securely clamped. Never place hands near the blade. Wait for a complete stop before setting down the saw.
How to clean the saw after use?
Remove the battery. Blow off dust with compressed air or a soft brush. Clean the base plate with a damp cloth. Do not use solvents. Lubricate moving parts with a drop of light oil.
Where to find spare parts?
Spare parts (blade, carbon brushes, pads) are available at Sterwins dealers or on the official website. Use the model number 36VCS2-34.1 to order.
Can the saw cut metal?
No, this saw is designed only for wood and derived materials (panels, MDF). For metal, use a specific blade but this reduces service life. Cutting metal without adequate protection is not recommended.
What to do if the saw does not start?
Check that the battery is charged and properly inserted. Ensure the safety lock (button on the side) is pressed. If the problem persists, the motor brushes may be worn; replace them.
How to store the saw long-term?
Remove the battery and store it separately in a dry, temperate place. Clean the saw and store it in its box or on a shelf away from moisture. Lightly lubricate metal parts to prevent rust.
User questions about 36VCS2-34.1 STERWINS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 36VCS2-34.1 - STERWINS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 36VCS2-34.1 by STERWINS.
USER MANUAL 36VCS2-34.1 STERWINS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STERWINS
Model : 36VCS2-34.1
Category : Saw