KWT 300 DC - Air Conditioning REMKO - Free user manual and instructions
Find the device manual for free KWT 300 DC REMKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner (Indoor Unit) |
| Model | KWT 300 DC |
| Cooling Capacity | 3.0 kW (approx. 10200 BTU/h) |
| Heating Capacity | 3.2 kW (approx. 10900 BTU/h) |
| Energy Efficiency Class | A++ (Cooling) / A+ (Heating) |
| Power Supply | 230 V / 50 Hz |
| Refrigerant | R32 |
| Dimensions (Indoor Unit) | 800 x 298 x 189 mm |
| Net Weight (Indoor Unit) | 9.5 kg |
| Airflow Rate | 400 m³/h |
| Sound Level (Indoor Unit) | 25 - 35 dB(A) |
| Operation Modes | Cooling, Heating, Fan, Dry |
| Compressor Type | DC Inverter |
| Control | Remote Control (IR) & Optional Wired Controller |
| Special Functions | Auto Restart, 24-Hour Timer, Sleep Mode, Swing Louver |
| Filter Type | Washable Anti-Bacterial Net |
| Maintenance | Clean air filter every 2-4 weeks |
| Safety Features | Overheat Protection, Low Voltage Start, Auto Fan Speed Control |
| Spare Parts | Remote Control, Air Filter, Drain Hose (Included) |
| Operating Temperature | Cooling: 16°C - 43°C / Heating: -5°C - 30°C |
Frequently Asked Questions - KWT 300 DC REMKO
How do I clean the air filter on my REMKO KWT 300 DC?
Turn off the unit and unplug it. Open the front panel, remove the filter, and vacuum or wash with water (mild detergent if needed). Let it dry completely before reinstalling. Clean every 2-4 weeks.
What does the error code E1 on the display mean?
Error code E1 indicates a problem with the room temperature sensor. Try turning the unit off, waiting 5 minutes, and restarting. If persistent, contact service.
Can I use the air conditioner without the remote control?
Yes, the unit has an emergency operation button on the indoor unit (usually behind the front panel). Press it to run in auto mode.
How do I set the timer for automatic on/off?
Press the TIMER button on the remote. Use +/- to set desired hours (1-24). Press TIMER again to confirm. Repeat for OFF timer.
What is the recommended cooling temperature?
For energy efficiency and comfort, set the temperature between 24°C and 26°C in cooling mode.
How often should I service the unit?
We recommend a professional inspection every 12 months, including cleaning of coils and checking refrigerant levels.
Why is the indoor unit leaking water?
Common causes: clogged drain pipe or dirty filter. Check the drain hose for blockages and clean the filter.
Can I install the KWT 300 DC myself?
Installation should be done by a qualified technician to ensure proper refrigerant handling and electrical connections.
What is the refrigerant type and amount?
The unit uses R32 refrigerant. Check the rating plate for exact charge (approx. 500g).
The remote control is not working. What can I do?
Replace the batteries. Make sure there are no obstacles between remote and unit. If still not working, reset by removing batteries for 30 seconds.
User questions about KWT 300 DC REMKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual KWT 300 DC - REMKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KWT 300 DC by REMKO.
USER MANUAL KWT 300 DC REMKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : REMKO
Model : KWT 300 DC
Category : Air Conditioning