ATY 356 DC - Air Conditioning REMKO - Free user manual and instructions
Find the device manual for free ATY 356 DC REMKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Conditioning Unit |
| Brand | Remko |
| Model | ATY 356 DC |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 3.6 kW |
| Energy Efficiency Ratio (EER) | 3.2 |
| Power Supply | 230 V / 50 Hz |
| Refrigerant | R410A |
| Dimensions (W x H x D) – Indoor Unit | 870 x 290 x 210 mm |
| Dimensions (W x H x D) – Outdoor Unit | 800 x 550 x 280 mm |
| Weight – Indoor Unit | 10 kg |
| Weight – Outdoor Unit | 35 kg |
| Operating Temperature Range | -15°C to 43°C |
| Functions | Cooling, Heating, Dehumidification, Fan |
| Air Filter | Washable pre-filter |
| Noise Level – Indoor Unit | 24 dB(A) (low speed) |
| Noise Level – Outdoor Unit | 52 dB(A) |
| Warranty | 2 years |
| Maintenance | Clean air filter every 2 weeks; annual professional service |
| Safety Features | Auto restart, compressor delay timer, overload protection |
| Spare Parts Availability | Remote control, filters, fan motor, compressor available |
Frequently Asked Questions - ATY 356 DC REMKO
How do I clean the air filter on the Remko ATY 356 DC?
Turn off the unit and unplug it. Open the front panel, remove the filter by sliding it out. Wash the filter with warm water and mild detergent, let it dry completely before reinstalling. Clean every two weeks for optimal performance.
What should I do if the air conditioner is not cooling?
Check that the thermostat is set lower than room temperature. Clean the air filter if dirty. Ensure the outdoor unit is not obstructed. If problem persists, contact a qualified technician to check refrigerant levels.
How do I set the timer on the Remko ATY 356 DC?
Press the 'Timer' button on the remote control. Use the +/- buttons to set the desired on or off time (0-24 hours). Press 'Timer' again to confirm. The indicator will show on the display.
Does the Remko ATY 356 DC have a heating function?
Yes, it is a heat pump model. Use the remote to select 'Heat' mode. The unit will reverse cycle to provide heating. Ensure the outdoor temperature is within the operating range (-15°C to 43°C).
What is the correct installation height for the indoor unit?
The indoor unit should be installed at least 1 meter above the floor and with a minimum clearance of 15 cm from the ceiling. Refer to the installation manual for detailed spacing requirements.
How can I improve energy efficiency of my air conditioner?
Set the thermostat to 24-26°C for cooling and 20-22°C for heating. Keep windows and doors closed. Use curtains to block direct sunlight. Regularly clean the air filter.
What do error codes E1 or E2 mean?
E1 indicates a room temperature sensor error. E2 indicates a pipe temperature sensor error. Turn off the unit and call a service technician for repair. Do not attempt to fix yourself.
Can I use the air conditioner in a room with high humidity?
Yes, use the 'Dry' mode. This reduces humidity without excessive cooling. The fan runs at low speed. It is effective for damp environments.
What is the warranty period for the Remko ATY 356 DC?
The standard warranty is 2 years for parts and labor. Register your product online to activate warranty. Extended warranty options may be available from your dealer.
How do I replace the remote control batteries?
Slide the battery cover on the back of the remote. Remove old batteries and insert two new AAA batteries, matching polarity. Replace the cover. Dispose of old batteries properly.
User questions about ATY 356 DC REMKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual ATY 356 DC - REMKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATY 356 DC by REMKO.