KWT 180 DC - Air Conditioning REMKO - Free user manual and instructions
Find the device manual for free KWT 180 DC REMKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split air conditioner (cooling and heating) |
| Model | KWT 180 DC |
| Brand | REMKO |
| Cooling Capacity | 5.2 kW (approx.) |
| Heating Capacity | 5.6 kW (approx.) |
| Energy Efficiency Rating | A++ (cooling) / A+ (heating) |
| Power Supply | 220-240 V, 50 Hz, single phase |
| Refrigerant | R32 (approx.) |
| Indoor Unit Dimensions (W x H x D) | Approx. 1000 x 300 x 220 mm |
| Outdoor Unit Dimensions (W x H x D) | Approx. 850 x 650 x 300 mm |
| Indoor Unit Weight | Approx. 12 kg |
| Outdoor Unit Weight | Approx. 40 kg |
| Airflow (Max) | 550 m³/h (approx.) |
| Noise Level Indoor (Low/High) | 25 / 45 dB(A) (approx.) |
| Noise Level Outdoor | 52 dB(A) (approx.) |
| Operating Temperature Range (Cooling) | -10°C to 43°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Key Functions | Auto mode, cooling, heating, dehumidification, fan only, temperature setting, timer, sleep mode, swing |
| Remote Control | Included with LCD display |
| Maintenance | Clean air filter every 2 weeks; professional service annually |
| Safety Features | Auto restart, overheat protection, anti-freeze protection, child lock (remote) |
| Spare Parts Availability | Filters, remote control, fan motors, PCBs available via service partner |
Frequently Asked Questions - KWT 180 DC REMKO
How do I clean the air filter?
Switch off the unit and unplug it. Open the front panel, remove the filter, vacuum or wash with lukewarm water, dry completely, and reinstall. Do not operate without the filter.
What does the error code E1 mean?
Error code E1 indicates a communication fault between the indoor and outdoor units. Check wiring connections and restart the system. If persists, contact a qualified technician.
Can I use the remote control from another REMKO model?
Only the original remote supplied with the KWT 180 DC is guaranteed to work. Third-party or other model remotes may not be compatible. Use the specific RC-08 type if replacement is needed.
What should I do if the air conditioner leaks water indoors?
Check the drain hose for blockages or kinks. Clean the drain pan and ensure proper slope. If the issue continues, call a service technician as the condensate pump might be faulty.
How often should I service the outdoor unit?
A professional annual inspection is recommended. The technician will clean coils, check refrigerant pressure, tighten electrical connections, and ensure fan operation.
What is the ideal temperature setting for energy savings?
For cooling, set to 24-26°C; for heating, 20-22°C. Use the timer and sleep mode to reduce energy consumption.
How do I reset the air conditioner after a power outage?
Unplug the unit for 5 minutes, then plug it back in. Turn on the unit using the remote. The auto restart feature should resume previous settings.
Can I install the indoor unit on a sloped ceiling?
No, the indoor unit must be mounted horizontally on a sturdy wall to ensure proper drainage and airflow. Sloped installation may cause water leakage and reduced performance.
What type of refrigerant does this model use?
The KWT 180 DC uses R32 refrigerant, which is more environmentally friendly than R410A. R32 is flammable, so only certified technicians should handle it.
How to pair the remote control with the unit?
Point the remote at the indoor unit and press the MODE button repeatedly until you hear a beep. If unsuccessful, replace batteries and try again. No manual pairing needed for most units.
User questions about KWT 180 DC REMKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual KWT 180 DC - REMKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KWT 180 DC by REMKO.