HUGHES & KETTNER

Spirit of Vintage Nano - Guitar amplifier HUGHES & KETTNER - Free user manual and instructions

Find the device manual for free Spirit of Vintage Nano HUGHES & KETTNER in PDF.

📄 32 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice HUGHES & KETTNER Spirit of Vintage Nano - page 2
2 / 32
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Guitar Amplifier
Brand Hughes & Kettner
Model Spirit of Vintage Nano
Output Power 1 Watt
Speaker 1 x 6.5 inches
Channels 1 channel (Clean / Overdrive)
Controls Volume, Gain, Tone, Master
Input 6.35 mm jack (instrument)
Output 6.35 mm jack (headphones)
Power Supply Mains 230V / 50 Hz
Dimensions (L x H x D) 28 x 15 x 20 cm
Weight 2.5 kg
Special Features Vintage circuit, progressive gain
Maintenance and Cleaning Unplug before cleaning. Use a soft dry cloth.
Safety Do not expose to moisture or shocks. Use only the supplied adapter.
Spare Parts and Repairability Contact a Hughes & Kettner authorized service center.

Frequently Asked Questions - Spirit of Vintage Nano HUGHES & KETTNER

How do I connect my guitar to the Spirit of Vintage Nano?
Use a standard 6.35 mm jack cable. Plug it into the Input located on the front panel.
Can I use headphones with this amplifier?
Yes, a headphone output is available on the rear panel. Connect your headphones to the Phones jack.
How do I clean the amplifier?
Unplug the device, then use a soft dry cloth. Do not use chemical or abrasive products.
What is the power of the amplifier?
The Spirit of Vintage Nano delivers 1 Watt, ideal for low-volume playing in home studios.
Does the amplifier have an overdrive channel?
Yes, the progressive gain allows switching from clean sound to vintage overdrive. Turn the Gain control to adjust saturation.
What type of speaker is built-in?
The amplifier is equipped with a 6.5-inch speaker that reproduces a typical vintage sound.
Can I use effects pedals with this amp?
Yes, you can connect pedals between your guitar and the amplifier's input. The headphone output can also be used.
What should I do if the amplifier doesn't turn on?
Check that the power cord is properly connected and that the mains outlet works. If the problem persists, contact after-sales service.
What is the warranty on this amplifier?
The warranty is 2 years for manufacturing defects. Keep your invoice for any claims.
Where can I find the serial number of the device?
The serial number is on a label at the back of the amplifier, near the power cord.

User questions about Spirit of Vintage Nano HUGHES & KETTNER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Guitar amplifier in PDF format for free! Find your manual Spirit of Vintage Nano - HUGHES & KETTNER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spirit of Vintage Nano by HUGHES & KETTNER.

USER MANUAL Spirit of Vintage Nano HUGHES & KETTNER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HUGHES & KETTNER

Model : Spirit of Vintage Nano

Category : Guitar amplifier