NGP 110 Inox - Water pump Neptun - Free user manual and instructions
Find the device manual for free NGP 110 Inox Neptun in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Neptun |
| Model | NGP 110 Inox |
| Body Material | Stainless steel |
| Dimensions (L x W x H) | 25 x 20 x 35 cm |
| Weight | 7.5 kg |
| Power Supply | 230 V / 50 Hz |
| Rated Power | 1100 W |
| Max Flow | 110 L/min |
| Max Head | 45 m |
| Max Pressure | 4.5 bar |
| Suction Connection | 1" (25 mm) |
| Discharge Connection | 1" (25 mm) |
| Liquid Type | Clean water without solids |
| Max Liquid Temperature | 35 °C |
| Protection Rating | IPX4 |
| Main Functions | Water pumping, pressure boosting, irrigation, domestic water supply |
| Maintenance and Cleaning | Regularly clean the suction filter; check seal tightness |
| Safety | Integrated thermal protection; do not run dry |
| Spare Parts and Repairability | Seal, valve, capacitor, impeller: available on request |
| General Information | User manual free download in PDF format |
Frequently Asked Questions - NGP 110 Inox Neptun
How to install the Neptun NGP 110 Inox pump?
Place the pump on a stable, level surface near the water source. Connect the suction hose to the inlet and the discharge hose to the outlet. Ensure the connections are tight. Fill the pump with water before first use to avoid dry running.
What is the maximum pressure of the NGP 110 Inox?
The maximum pressure is 4.5 bar (45 meters head).
Can I use the pump for rainwater?
Yes, provided the water is clean and free of solid particles. An upstream filter is recommended.
What should I do if the pump does not start?
Check the power supply, that the circuit breaker has not tripped, and that the pump is primed (filled with water). Refer to the manual for safety tests.
How to maintain the pump?
Regularly clean the suction filter and check seal tightness. In winter, drain the pump to prevent freezing.
Can the pump run continuously?
The pump is designed for intermittent operation. Respect the on/off cycles indicated in the manual to avoid overheating.
What is the maximum suction hose length?
The maximum suction height is 8 meters. Beyond that, performance may decrease.
Where to find spare parts for the NGP 110 Inox?
Spare parts (seals, valve, impeller, capacitor) are available from your dealer or Neptun after-sales service.
Is the pump noisy?
The noise level is about 70 dB at 1 meter. Place it on an anti-vibration pad to reduce noise.
Can I download the manual in PDF?
Yes, the full manual is available free in PDF format at notice-facile.com.
User questions about NGP 110 Inox Neptun
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual NGP 110 Inox - Neptun and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NGP 110 Inox by Neptun.
USER MANUAL NGP 110 Inox Neptun
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Neptun
Model : NGP 110 Inox
Category : Water pump