DW-601473C X - Dishwasher Vivax - Free user manual and instructions
Find the device manual for free DW-601473C X Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Vivax |
| Model | DW-601473C X |
| Dimensions (H x W x D) | 845 x 598 x 598 mm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A+ |
| Noise Level | 44 dB |
| Capacity | 14 place settings |
| Programs | Eco, Intensive, Quick, Glass, Pre-wash, Auto |
| Display | LED |
| Delay Start | Yes (1-24 hours) |
| Half Load | Yes |
| Water Consumption (per cycle) | 9.5 L |
| Energy Consumption (per cycle) | 0.92 kWh |
| Drying System | Condensation |
| Salt and Rinse Aid Indicator | Yes |
| Child Lock | Yes |
| Adjustable Rack | Yes |
| Cutlery Basket | Yes |
| Water Protection System | AquaStop |
Frequently Asked Questions - DW-601473C X Vivax
How do I install the Vivax DW-601473C X dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water inlet hose to a cold water supply (max 60°C) and the drain hose to a waste pipe. Plug into a grounded outlet. Refer to the installation section of the manual for detailed steps.
What detergent should I use?
Use a dishwasher detergent specifically designed for automatic dishwashers, either powder, gel, or tablets. Ensure it is suitable for your water hardness level.
Why is the dishwasher not cleaning dishes properly?
Check that the spray arms are not blocked, that you are using the correct amount of detergent, and that the water temperature is high enough. Also ensure the filters are clean and the load is not overcrowded.
How do I add salt and rinse aid?
Open the salt compartment (usually at the bottom of the dishwasher) and fill with dishwasher salt. For rinse aid, open the dispenser on the door and pour until the indicator shows full. Adjust the dosage based on water hardness.
What does the error code E1 mean?
Error code E1 typically indicates a water supply issue. Check that the water tap is fully open and the inlet hose is not kinked or blocked. If the problem persists, contact support.
How do I clean the filters?
Remove the bottom rack, then twist and lift out the filter assembly. Rinse under running water, using a soft brush if necessary. Reassemble and ensure it is locked in place. Clean filters monthly.
Can I use the dishwasher with half load?
Yes, the Vivax DW-601473C X has a half-load function. Select this option to save water and energy when the dishwasher is not fully loaded.
How do I activate the child lock?
Press and hold the Child Lock button (usually indicated by a key icon) for 3-5 seconds until the indicator lights up. Repeat to deactivate.
What is the noise level of this dishwasher?
The Vivax DW-601473C X operates at a noise level of 44 dB, which is very quiet and suitable for open-plan living.
How do I reset the dishwasher?
To reset, press and hold the Start/Pause button for about 10 seconds until the display shows a reset confirmation. Alternatively, disconnect the power for 30 seconds.
User questions about DW-601473C X Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DW-601473C X - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DW-601473C X by Vivax.
USER MANUAL DW-601473C X Vivax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivax
Model : DW-601473C X
Category : Dishwasher