Martin Logan

Theater i - Speaker Martin Logan - Free user manual and instructions

Find the device manual for free Theater i Martin Logan in PDF.

📄 24 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Martin Logan Theater i - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Center Channel Speaker
Brand MartinLogan
Model Theater i
Drivers 1 x XStat CLS electrostatic panel (center), 2 x 5.25" cast-basket woofers
Frequency Response 48 Hz – 20 kHz ± 3 dB
Impedance 4 Ω (compatible with 4–8 Ω amplifiers)
Sensitivity 90 dB (2.83 V/m)
Power Handling 100–200 W RMS (recommended amplifier 20–300 W)
Crossover Frequency 500 Hz (electrostatic to woofers)
Dimensions (W x H x D) 26.5 x 7.5 x 14.0 inches (673 x 191 x 356 mm)
Weight 28.0 lbs (12.7 kg)
Enclosure Type Bass-reflex with dual rear-firing ports
Finish Options Black gloss, Cherry gloss
Input Type Single-wire binding posts (bi-wire capable)
Power Requirement Passive speaker; no external power needed
Main Functions High-fidelity center channel for home theater; detailed dialogue reproduction; wide soundstage
Cleaning & Maintenance Use dry microfiber cloth for cabinet; gentle vacuum with soft brush for electrostatic panel; avoid liquids
Safety Precautions Keep away from moisture; do not block ports; ensure stable placement; avoid excessive heat or humidity
Spare Parts & Repairability Replaceable electrostatic panel and woofers; contact MartinLogan service for parts
General Information Designed for use with MartinLogan subwoofer for full-range system; compatible with most AV receivers

Frequently Asked Questions - Theater i Martin Logan

What is the recommended amplifier power for the Theater i?
The Theater i has a power handling of 100–200 W RMS. MartinLogan recommends an amplifier rated between 20 and 300 watts per channel into 4 ohms for best performance.
Can I mount the Theater i on a wall?
The Theater i is designed for shelf or stand placement. It is not wall-mountable out of the box. You may use third-party shelves or stands rated for its weight.
How do I clean the electrostatic panel?
Use a soft brush attachment on a low-suction vacuum to gently remove dust from the panel. Avoid touching the panel with fingers or using liquids. For stubborn dust, a dry microfiber cloth can be used lightly.
What is the correct impedance setting on my AV receiver?
Set your receiver to 4 ohms if available. The Theater i has a nominal impedance of 4 ohms, and some receivers have a switch for 4/8 ohm operation. Check your receiver manual.
Does the Theater i require a subwoofer?
For a full-range experience, MartinLogan recommends a subwoofer, as the Theater i rolls off at 48 Hz. A subwoofer will handle deeper bass effects and take load off the main speakers.
Can I bi-wire or bi-amp the Theater i?
Yes, the Theater i has dual binding posts that allow bi-wiring or bi-amping. Remove the jumpers between the posts to separate the low and high frequency sections.
What is the warranty on the Theater i?
MartinLogan typically offers a 5-year limited warranty for speakers and 2 years for electronics. Check your purchase documentation for exact terms.
How far should the Theater i be from the wall?
Since the Theater i has rear-firing ports, allow at least 6 inches (15 cm) of clearance behind the speaker for proper bass response and to avoid port noise.
Can I use the Theater i as a left/right speaker?
While designed as a center channel, it can be used as a left/right speaker in a smaller system. However, it performs best as a dedicated center to match other MartinLogan electrostats.
How do I break in the Theater i?
No formal break-in is required. Play the speaker at moderate volume for 20–30 hours to allow the components to settle for optimal performance.

User questions about Theater i Martin Logan

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual Theater i - Martin Logan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Theater i by Martin Logan.

USER MANUAL Theater i Martin Logan

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Martin Logan

Model : Theater i

Category : Speaker