Aeon i - Speaker Martin Logan - Free user manual and instructions
Find the device manual for free Aeon i Martin Logan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor-standing electrostatic loudspeaker |
| Dimensions (H x W x D) | 50.5 x 9.5 x 15.75 inches (128.3 x 24.1 x 40.0 cm) |
| Weight | 45 lbs (20.4 kg) each |
| Frequency Response | 42 Hz – 22 kHz ± 3 dB |
| Impedance | 4 ohms nominal |
| Sensitivity | 91 dB / 2.83 volts / meter |
| Power Handling | 25 – 300 watts per channel |
| Drivers | Electrostatic panel with 8-inch powered woofer |
| Recommended Amplification | 50 – 150 watts per channel into 4 ohms |
| Finish Options | Black ash or cherry vinyl |
| Power Supply | AC 120V / 60Hz (powered woofer) |
| Inputs | Binding posts for bare wire, banana plugs, or spades |
| Bi-wiring / Bi-amping | Yes, removable jumper links |
| Cleaning | Gently dust with soft cloth; avoid moisture on electrostatic panel |
| Safety Features | Non-skid rubber feet; stable base; avoid blocking ventilation |
| Spare Parts | Replaceable electrostatic panel and woofer |
| Warranty | 5 years for panel; 3 years for electronics |
Frequently Asked Questions - Aeon i Martin Logan
How do I set up my Aeon i speakers for optimal sound?
Place the speakers at least 2 feet from the back wall and angle them slightly toward the listening position. Ensure the electrostatic panel is free from obstructions and the powered woofer is plugged into AC power. Follow the manual’s recommended toe-in and distance.
Can I bi-wire or bi-amp the Aeon i?
Yes, the speaker has two pairs of binding posts connected by metal jumper links. Remove the links to bi-wire or bi-amp. Ensure amplifiers are compatible with 4-ohm loads.
How do I clean the electrostatic panel?
Use a soft, dry microfiber cloth to gently dust the panel. Avoid any liquids, sprays, or abrasive materials. For stubborn dirt, lightly dampen the cloth with distilled water and wring thoroughly before wiping.
What amplifier power is recommended?
An amplifier delivering 50–150 watts per channel into 4 ohms is ideal. The speakers can handle up to 300 watts peak, but very low-powered amps may cause distortion.
Why is there no sound from the speakers?
Check that the powered woofer is plugged into a working AC outlet and the speaker wires are securely connected. Ensure the amplifier is turned on and not muted. If the electrostatic panel is silent, it may need a few minutes to charge.
How long does the electrostatic panel last?
With normal use, the panel can last 10–20 years. Factors like humidity and dust affect lifespan. Martin Logan panels are replaceable; contact support for service.
Can I place the speakers near a TV or electronics?
Yes, the speakers are magnetically shielded. However, keep them at least 2 feet away from CRT monitors to avoid interference. LCD and LED screens are unaffected.
What is the break-in period?
Expect 50–100 hours of playing time for the speakers to reach full performance. Sound will become smoother and more open over time.
How do I replace a blown fuse?
The fuse is located inside the AC input module on the back. Unplug the speaker, pull out the fuse drawer, and replace with a 1.6A 250V (5x20mm) fast-blow fuse. Reinsert and test.
Are the Aeon i speakers wall-mountable?
No, the Aeon i is designed for floor placement. The heavy electrostatic panel and powered woofer require a stable base. Wall-mounting may damage the speaker.
User questions about Aeon i Martin Logan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Aeon i - Martin Logan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Aeon i by Martin Logan.