Clarity - Speaker Martin Logan - Free user manual and instructions
Find the device manual for free Clarity Martin Logan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Electrostatic Loudspeaker |
| Dimensions (H x W x D) | 13.5 x 8 x 12 inches (34.3 x 20.3 x 30.5 cm) |
| Weight | 12.4 lbs (5.6 kg) per speaker |
| Frequency Response | 45 Hz – 23 kHz ± 3 dB |
| Sensitivity | 86 dB / 2.83V / 1 meter |
| Impedance | 4 ohms nominal |
| Power Handling | 100 watts RMS (200 watts peak) |
| Recommended Amplifier Power | 20 – 200 watts per channel |
| Placement Distance from Back Wall | Minimum 2 feet (0.6 m) |
| Speaker Type | Bipolar / Dipolar |
| Diaphragm Material | Thin-film Mylar |
| Stator Material | Perforated steel |
| Input Type | Binding posts (banana plugs compatible) |
| Power Requirement | AC line voltage (100–240 V, 50/60 Hz) |
| Cleaning Instructions | Dust gently with soft dry cloth; avoid liquids and aerosols |
| Safety Precautions | Do not operate near water or with damaged power cord |
| Repair & Spare Parts | Contact authorized MartinLogan service center |
| Warranty | 2 years limited (see manual for details) |
Frequently Asked Questions - Clarity Martin Logan
How should I position the MartinLogan Clarity speakers?
Place them at least 2 feet (0.6 m) from the back wall and slightly toe them in toward the listening position for optimal soundstage.
Can I use any amplifier with the Clarity?
Yes, but it is recommended to use an amplifier rated between 20 and 200 watts per channel with a stable 4-ohm load capability.
How do I clean the electrostatic panel?
Use a soft, dry microfiber cloth to gently remove dust. Never use liquids, sprays, or abrasive cleaners as they can damage the Mylar diaphragm.
What is the frequency response of the Clarity?
The frequency response is 45 Hz to 23 kHz ± 3 dB, delivering deep bass and extended high-frequency detail.
Can I drive the Clarity with a low-power tube amp?
It is not recommended. Tube amps with low wattage may struggle due to the 4-ohm impedance; solid-state or high-current tube amps are preferable.
Does the Clarity require a dedicated power source?
No, it connects directly to your amplifier via standard speaker wires. However, ensure the amplifier is turned off before connecting to avoid damage.
What if I hear static or distortion from the speakers?
Check the amplifier for clipping, ensure the speakers are not placed too close to walls, and verify the incoming AC power is stable. Persistent issues may require professional service.
How do I connect the Clarity to a subwoofer?
Connect the subwoofer using the line-level or LFE input from your preamp or receiver. The Clarity will handle mid/high frequencies while the subwoofer covers bass.
Are the Clarity speakers bi-wireable?
No, the binding posts are configured for a single connection. If bi-wiring is desired, consult an authorized dealer for modifications.
What should I do if the speakers produce no sound?
First, verify the amplifier is on and source is playing. Check speaker wire connections at both ends. If the problem persists, test with another speaker or contact support.
User questions about Clarity Martin Logan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Clarity - Martin Logan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Clarity by Martin Logan.
USER MANUAL Clarity Martin Logan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Martin Logan
Model : Clarity
Category : Speaker