IC-500-T-SC - Speaker KLIPSCH - Free user manual and instructions
Find the device manual for free IC-500-T-SC KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-ceiling speaker |
| Brand | Klipsch |
| Model | IC-500-T-SC |
| Dimensions (cutout diameter) | 180 mm |
| Mounting depth | 105 mm |
| Weight | 2.5 kg |
| Power | Passive (external amplifier required) |
| Nominal power (RMS) | 50 W |
| Maximum power (peak) | 100 W |
| Frequency response | 50 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 91 dB (1W/1m) |
| Woofer | 5.25 inches (133.35 mm) polypropylene |
| Tweeter | 1 inch (25.4 mm) aluminum dome |
| Tweeter orientation | Yes, pivotable up to 15° |
| Key features | Flush installation, pivotable tweeter, magnetic bezel-less grille, two-way speaker |
| Care and cleaning | Wipe with a soft dry cloth. Do not use abrasive cleaners or solvents. |
| Safety | Professional installation recommended. Follow local electrical codes. |
| Spare parts and repairability | Grille, tweeter and woofer replaceable. Contact an authorized service center. |
Frequently Asked Questions - IC-500-T-SC KLIPSCH
What cutout diameter is needed to install the IC-500-T-SC?
The required cutout diameter is 180 mm. Make sure to cut a clean hole in the ceiling before installation.
Can I use this speaker with a low-power amplifier?
Yes, the IC-500-T-SC has a sensitivity of 91 dB, making it compatible with amplifiers from 20 to 100 W RMS.
Is the tweeter pivotable?
Yes, the 1-inch aluminum dome tweeter can be pivoted up to 15° to direct sound toward the listening area.
How to attach the speaker grille?
The grille is held by built-in magnets. Simply place it on the speaker; it attaches magnetically without screws.
What is the minimum ceiling depth required?
The mounting depth is 105 mm. Check that the ceiling space is sufficient to accommodate the speaker.
Is this speaker suitable for a bathroom or kitchen?
The IC-500-T-SC is not certified for humid environments. Avoid installing it in rooms prone to moisture.
What type of cable should be used for connection?
Use a speaker cable with a minimum cross-section of 2x1.5 mm². Observe polarity (+/-) for correct stereo imaging.
How to clean the speaker without damaging it?
Wipe the grille with a soft dry cloth. For stubborn stains, lightly dampen the cloth. Never use chemical cleaners.
Can I replace the woofer or tweeter?
Yes, these components are replaceable. Contact an authorized service center for original replacement parts.
What is the warranty on this model?
Klipsch offers a 5-year warranty against manufacturing defects. Keep your purchase receipt.
User questions about IC-500-T-SC KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual IC-500-T-SC - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IC-500-T-SC by KLIPSCH.
USER MANUAL IC-500-T-SC KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : IC-500-T-SC
Category : Speaker