IGS-2128 - Switch LEVELONE - Free user manual and instructions
Find the device manual for free IGS-2128 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Switch |
| Model | LevelOne IGS-2128 |
| Ports | 24 x 10/100/1000 Mbps RJ45 + 4 x 1000Base-X SFP |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U) |
| Weight | 3.5 kg |
| Power Supply | 100-240V AC, 50-60 Hz, 30W max |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, Link/Act per port, SFP |
| Management Features | Web, CLI, SNMP v1/v2c/v3, RMON, Telnet, SSH |
| VLAN Support | IEEE 802.1Q VLAN, up to 256 VLAN groups |
| Quality of Service (QoS) | 8 priority queues, strict priority and WRR |
| Security Features | 802.1X, ACL, Port Security, DHCP Snooping |
| Maintenance | Clean with dry cloth; ensure adequate ventilation |
| Safety | CE, FCC, RoHS compliant; operate within specified temperature range |
| Repairability | No user-serviceable parts; contact LevelOne support for service |
Frequently Asked Questions - IGS-2128 LEVELONE
How do I reset the LevelOne IGS-2128 to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. The switch will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username is admin and password is admin.
How can I update the firmware on the IGS-2128?
Download the latest firmware from the LevelOne website. Access the web interface, go to System > Firmware Upgrade, and upload the file. Do not power off during upgrade.
How do I configure VLANs on the switch?
Log into the web interface, navigate to VLAN > 802.1Q VLAN. Create VLAN groups and assign ports as tagged or untagged as needed. Apply changes.
What types of SFP modules are compatible?
The switch supports standard 1000Base-SX/LX SFP modules. Use only LevelOne certified modules for full compatibility and performance.
How do I enable port mirroring?
Go to Monitoring > Port Mirroring. Select the source port and the destination (monitor) port. Enable mirroring and apply settings.
The switch does not power on. What should I check?
Ensure the power cord is securely connected to both the switch and a working power outlet. Check if the power LED is lit. If not, try a different power cord or outlet.
How do I perform a cable test?
Access the web interface, go to Maintenance > Cable Test. Select the port to test. The result will indicate cable length and status (open/short).
Can I stack multiple IGS-2128 switches?
No, the IGS-2128 does not support physical stacking. However, you can manage multiple switches via SNMP or use link aggregation for increased bandwidth.
What should I do if I forget the password?
Perform a factory reset using the reset button. This will restore the default username and password. Ensure you reconfigure the switch after reset.
User questions about IGS-2128 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGS-2128 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGS-2128 by LEVELONE.
USER MANUAL IGS-2128 LEVELONE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEVELONE
Model : IGS-2128
Category : Switch