IGS-2110 - Switch LEVELONE - Free user manual and instructions
Find the device manual for free IGS-2110 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed PoE+ Switch |
| Ports | 8x 10/100/1000Base-T PoE+, 2x Gigabit SFP (Combo) |
| PoE Budget | 120W total (30W per port) |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K entries |
| Dimensions (LxWxH) | 160 x 110 x 45 mm |
| Weight | 0.8 kg |
| Power Input | 48-56VDC (terminal block or power jack) |
| Power Consumption | Max 9W (without PoE), 130W (full PoE load) |
| Operating Temperature | -40°C to 75°C |
| Cooling | Fanless, passive cooling |
| Management | Web GUI, CLI, SNMP, VLAN, QoS, IGMP Snooping |
| Standards | IEEE 802.3af/at/bt, 802.1Q, 802.1p, 802.1D, 802.1w |
| Protection | Surge protection, ESD, overload protection |
| Mounting | DIN rail or wall mount |
| Enclosure | IP30 metal case |
| Certifications | FCC, CE, UL |
| Cleaning | Use dry cloth; disconnect power before cleaning |
| Spare Parts | Power supply, terminal block, rack mount kit (optional) |
Frequently Asked Questions - IGS-2110 LEVELONE
What is the typical use case for the LevelOne IGS-2110?
The IGS-2110 is designed for industrial environments requiring reliable PoE+ connectivity for devices like IP cameras, wireless access points, and sensors in harsh conditions.
How do I reset the switch to factory defaults?
Press and hold the Reset button (located on the front panel) for 10 seconds using a pointed object until the system LED blinks rapidly. The switch will reboot with factory settings.
Can I use standard Cat5e cables for PoE?
Yes, the switch supports PoE+ over standard Cat5e or higher cables. Ensure cable length does not exceed 100 meters for PoE delivery.
Does the IGS-2110 support VLAN configuration?
Yes, it supports 802.1Q VLAN tagging and port-based VLANs via the web interface or CLI, allowing network segmentation for security and traffic management.
What is the power consumption without PoE load?
The switch itself consumes approximately 9W under normal operation. With full PoE load, total power can reach up to 130W.
Can I mount the switch on a DIN rail?
Yes, the IGS-2110 comes with a DIN rail bracket pre-installed. It also includes wall mount ears for alternative mounting.
How do I update the firmware?
Download the latest firmware from the LevelOne support page. Access the web GUI, go to System > Firmware Upgrade, upload the file, and wait for the device to reboot.
What is the maximum PoE power per port?
Each port can deliver up to 30W (IEEE 802.3at) when the total budget allows. Some ports may support up to 60W if using 802.3bt Type 3 (check model variant).
Is the switch managed or unmanaged?
The IGS-2110 is a managed switch with features like VLAN, QoS, IGMP snooping, and SNMP, accessible via web GUI, CLI, or Telnet.
What should I do if the switch gets wet?
Immediately disconnect power. Wipe with a dry cloth and let it dry completely in a warm, ventilated area for at least 24 hours. Do not use until fully dry.
User questions about IGS-2110 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGS-2110 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGS-2110 by LEVELONE.
USER MANUAL IGS-2110 LEVELONE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEVELONE
Model : IGS-2110
Category : Switch