MTWC 91295 W UK N - Washing machine INDESIT - Free user manual and instructions
Find the device manual for free MTWC 91295 W UK N INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Indesit |
| Model | MTWC 91295 W UK N |
| Colour | White |
| Capacity | 9 kg |
| Maximum Spin Speed | 1200 rpm |
| Energy Efficiency Class | A++ |
| Washing Efficiency Class | A |
| Spin Drying Efficiency Class | B |
| Noise Level (Wash) | 59 dB(A) |
| Noise Level (Spin) | 76 dB(A) |
| Dimensions (H x W x D) | 85 cm x 59.5 cm x 51.5 cm |
| Weight | 66 kg |
| Power Supply | 220-240 V, 50 Hz |
| Current | 10 A |
| Water Consumption per Cycle | 50 L |
| Annual Energy Consumption | 200 kWh |
| Number of Programs | 16 |
| Key Features | Delay Timer, Child Lock, Variable Temperature, Variable Spin Speed |
| Drum Volume | 62 L |
| Maximum Load | 9 kg |
| Certifications | CE, UKCA |
Frequently Asked Questions - MTWC 91295 W UK N INDESIT
How do I install the washing machine?
Ensure the machine is on a level surface. Connect the inlet hose to a water supply and the drain hose to a standpipe or sink. Plug into a 220-240 V socket and run a drum clean cycle before first use.
What is the maximum load capacity?
The maximum load is 9 kg for cotton programs. For synthetics and delicates, reduce load to 4.5 kg and 2 kg respectively to ensure proper washing.
How do I clean the detergent drawer?
Press the release button inside the drawer and pull it out. Rinse under warm water to remove residue. Clean the softener compartment with a brush. Reinsert fully.
What does error code F01 mean?
Error F01 indicates a motor control board fault or a triac issue. Try unplugging the machine for 2 minutes. If persistent, contact service.
How do I activate the child lock?
Press and hold the child lock button (often indicated by a padlock icon) for 3 seconds. A light will confirm activation. To deactivate, repeat the process.
What is the annual energy consumption?
The annual energy consumption is approximately 200 kWh based on standard cycles. Actual consumption depends on usage patterns and selected programs.
How do I run a drum clean cycle?
Remove all laundry and detergent. Select the Drum Clean program (if available) or run a 90°C cotton cycle with a descaling agent. Follow by wiping the door seal.
Why is the machine not spinning?
Check if the spin speed is set to zero or the rinse hold option is active. Ensure the load is balanced. A blocked drain pump filter can also prevent spinning.
How do I replace the inlet hose?
Turn off the water supply and disconnect the old hose. Use a new 3/4 inch hose with rubber washers. Tighten manually and check for leaks before running a cycle.
Where can I find the serial number?
The serial number is located on a sticker inside the door frame or on the rear panel. It is needed for warranty claims and ordering spare parts.
User questions about MTWC 91295 W UK N INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual MTWC 91295 W UK N - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTWC 91295 W UK N by INDESIT.