M4300-24X - Switch NETGEAR - Free user manual and instructions
Find the device manual for free M4300-24X NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2/L3 Stackable Switch |
| Ports | 24 x 10GBase-T (RJ45) + 4 x 10G SFP+ Uplinks |
| Switching Capacity | 480 Gbps |
| Forwarding Rate | 357 Mpps |
| VLAN Support | Up to 1024 VLANs |
| Stacking | Up to 8 units via dedicated stacking ports |
| Dimensions (W x D x H) | 440 x 259 x 43 mm (1U) |
| Weight | 5.3 kg (11.7 lbs) |
| Power Supply | 100-240V AC, 50-60 Hz, 180W max |
| Power Consumption | Typically 120W, max 180W |
| Cooling | Internal fans with speed control |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3, RMON, sFlow |
| Safety and Emissions | CE, FCC Class A, UL/cUL |
| Mounting | Rackmount brackets included |
| Warranty | Limited Lifetime Warranty |
| Cleaning and Maintenance | Disconnect power before cleaning; use dry soft cloth; no liquid cleaners |
| Repair and Spare Parts | No user-serviceable parts; contact Netgear support for service |
Frequently Asked Questions - M4300-24X NETGEAR
How do I reset the M4300-24X to factory defaults?
Press and hold the factory reset button on the front panel using a paperclip for about 10 seconds until the device reboots. All settings will be restored to defaults.
What are the default login credentials?
The default username is admin and password is password. Change these immediately after first login.
Can I stack multiple M4300-24X switches?
Yes, up to 8 units can be stacked using the dedicated 24Gbps stacking ports on the rear. No separate stacking modules are required.
How do I update the firmware?
Download the latest firmware from Netgear support website. Access the web GUI, go to Maintenance > File Management > Firmware Upgrade, and upload the image file.
What type of SFP+ modules are supported?
The switch supports 10G SFP+ modules and also 1G SFP modules. Use only Netgear certified or compatible modules for best performance.
How do I configure VLANs?
Via the web GUI, go to Switching > VLAN > Basic, create VLANs and assign ports. For advanced settings, use the CLI or interface mode.
The switch does not power on. What should I check?
Verify the power cord is securely connected, the power outlet works, and the power LED is lit. Try a different cable or outlet if needed.
How do I enable link aggregation?
Go to Switching > LAG in the web GUI, create a new LAG group, and assign member ports. Ensure the connected device supports LACP or static trunking.
What is the maximum power consumption?
The maximum power consumption is 180W under full load, but typical usage is around 120W. Ensure the power supply provides sufficient capacity.
Can I mount the switch on a wall?
The M4300-24X is designed for rack mounting in a 19-inch rack (1U height). Wall mounting is not supported and could cause overheating.
User questions about M4300-24X NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual M4300-24X - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4300-24X by NETGEAR.
USER MANUAL M4300-24X NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4300-24X
Category : Switch