X1C - Flash GODOX - Free user manual and instructions
Find the device manual for free X1C GODOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Flash Trigger |
| Brand | Godox |
| Model | X1C |
| Compatibility | Canon EOS cameras with hot shoe |
| Dimensions (L x W x H) | Approx. 70 x 45 x 30 mm |
| Weight | Approx. 80 g (without batteries) |
| Power Source | 2 x AA batteries (alkaline or rechargeable) |
| Wireless Range | Up to 100 m (open area) |
| Wireless Frequency | 2.4 GHz |
| TTL Support | Yes (i-TTL) |
| High-Speed Sync (HSS) | Yes, up to 1/8000 s |
| Number of Channels | 32 |
| Number of Groups | 5 (A, B, C, D, E) |
| LCD Display | Yes, with backlight |
| Firmware Upgrade | Via USB (Type-C) |
| Maintenance & Cleaning | Wipe gently with a dry, soft cloth. Avoid solvents. |
| Safety Precautions | Keep away from water and extreme temperatures. Remove batteries if not used for extended periods. |
| Spare Parts & Repairability | Batteries, USB cable; service through authorized repair centers. |
| General Information | Supports multi-group TTL, manual flash, and stroboscopic modes. |
Frequently Asked Questions - X1C GODOX
How do I pair the Godox X1C with a flash like the Godox V860II?
Ensure both devices are set to the same channel and group. Press the CH button on the X1C to select a channel, then set the flash accordingly. The X1C should automatically link.
Can the X1C trigger non-Godox flashes?
Yes, if the flash has a compatible receiver (e.g., Godox X2R or built-in 2.4G system) and is set to the same channel and group. Third-party flashes may require a receiver.
What batteries does the X1C use?
It uses two AA batteries. Alkaline or Ni-MH rechargeable batteries are recommended for best performance. Battery life is approximately 30 hours under normal use.
How do I update the firmware on the X1C?
Download the latest firmware from the Godox website. Connect the X1C to a computer via USB Type-C cable. Run the Godox G1 updater tool and follow instructions.
What is the wireless range of the X1C?
The effective range is up to 100 meters in open outdoor areas without obstructions. Indoors, range may be reduced due to walls and interference.
Can I use the X1C off-camera as a standalone trigger?
Yes, the X1C can be used as a transmitter on the camera hot shoe or as a standalone trigger when not mounted. It includes a test button for manual firing.
How do I reset the X1C to factory settings?
Press and hold the MENU button for about 5 seconds until the display shows 'CLr'. Then press the OK button to confirm. All settings will be cleared.
Does the X1C support high-speed sync (HSS)?
Yes, the X1C supports High-Speed Sync up to 1/8000 s when used with compatible flashes. Enable HSS on both the trigger and the flash.
What do the group indicators A, B, C, D, E mean?
These are five independent groups that allow you to control multiple flashes separately. Each group can be set to TTL, Manual, or Off independently.
How do I clean the X1C?
Wipe the exterior with a dry, lint-free cloth. Do not use alcohol or solvents. Keep the battery contacts clean. Avoid moisture.
User questions about X1C GODOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual X1C - GODOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X1C by GODOX.
USER MANUAL X1C GODOX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GODOX
Model : X1C
Category : Flash