SBS-ML 800 - Uncategorized STEINBERG - Free user manual and instructions
Find the device manual for free SBS-ML 800 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Steinberg |
| Model | SBS-ML 800 |
| Product type | Uncategorized audio device |
| Dimensions (W x D x H) | 300 mm × 200 mm × 150 mm |
| Weight | 2.5 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Rated power | 80 W RMS |
| Frequency response | 20 Hz – 20 kHz |
| Input impedance | 10 kΩ |
| Connectivity | 6.35 mm Jack input, speaker output |
| Main functions | Sound amplification, volume control, built-in equalizer |
| Maintenance and cleaning | Clean with a soft, dry cloth; do not use abrasive products |
| Safety | Unplug the device before any cleaning; do not expose to moisture |
| Spare parts and repairability | Parts available through after-sales service; repair by a professional recommended |
| General information | Home or studio use; operating temperature 5-35°C |
Frequently Asked Questions - SBS-ML 800 STEINBERG
How to turn on the Steinberg SBS-ML 800?
Plug the device into a power outlet, then press the Power switch on the front panel.
What type of cable to use for the audio input?
Use an unbalanced or balanced 6.35 mm jack cable depending on the source. Plug it into the Input port.
How to adjust the volume?
Turn the Volume knob clockwise to increase, counterclockwise to decrease. An LED display shows the level.
What to do if the device does not turn on?
Check that the power cord is properly connected and that the power outlet works. If the problem persists, contact after-sales service.
Can I use the device with headphones?
Yes, plug headphones into the Headphone jack (3.5 mm) on the front panel. The speaker is then muted.
How to clean the device?
Unplug the device, then wipe it with a soft, dry cloth. Never use liquid or abrasive cleaners.
Is there overload protection?
Yes, the device is equipped with a thermal protection circuit and an internal fuse. In case of overload, it shuts off automatically.
Where to find spare parts?
Spare parts are available from Steinberg after-sales service. Refer to the manual for part numbers.
Can I connect a microphone?
Yes, plug a dynamic microphone into the Mic Input (6.35 mm jack). Adjust the gain if necessary.
How to reset the device to factory settings?
Press and hold the Reset button (located on the back) for 3 seconds. All settings return to default values.
User questions about SBS-ML 800 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBS-ML 800 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-ML 800 by STEINBERG.
USER MANUAL SBS-ML 800 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-ML 800
Category : Uncategorized