DSM 200PS - Polisher Holzmann - Free user manual and instructions
Find the device manual for free DSM 200PS Holzmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Polisher |
| Brand | Holzmann |
| Model | DSM 200PS |
| Power Input | 1200 W |
| Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 1000 - 3000 rpm (variable) |
| Disc Diameter | 200 mm |
| Spindle Thread | M14 |
| Weight | 2.5 kg |
| Dimensions (L x W x H) | 450 x 120 x 150 mm |
| Cable Length | 2 m |
| Sound Pressure Level | 85 dB(A) |
| Vibration Level | < 2.5 m/s² |
| Protection Class | II (double insulated) |
| Safety Features | Overload protection, lock-on switch |
| Main Functions | Polishing, buffing, sanding (with appropriate discs) |
| Maintenance | Regularly clean ventilation slots; replace carbon brushes when worn |
| Spare Parts | Carbon brushes, backing pad, sanding discs |
| Supplementary Information | CE certified; 2-year warranty |
Frequently Asked Questions - DSM 200PS Holzmann
How do I change the polishing pad?
Ensure the machine is unplugged. Press the spindle lock button to immobilize the spindle. Use the supplied wrench to loosen the backing pad retaining nut. Replace the pad and tighten the nut securely.
What speed should I use for polishing?
Start at a low speed (1000-1500 rpm) to spread the polish, then increase to 2000-2500 rpm for finishing. Always test on a small area first. Refer to the variable speed dial.
How do I clean the polisher?
Unplug the polisher. Wipe the exterior with a dry cloth. Clean the ventilation slots with a brush. Do not use water or solvents. For the backing pad, remove it and wash with mild soap if needed.
Can I use this polisher for sanding?
Yes, you can attach sanding discs with the appropriate backing pad. Use lower speeds (1000-1500 rpm) for sanding. Ensure the disc is rated for the machine's speed.
What safety precautions should I take?
Always wear safety goggles and gloves. Keep the work area well-ventilated. Secure the workpiece. Do not use in wet conditions. Disconnect power before changing accessories. The machine is double insulated, so no earth wire is needed.
How do I replace the carbon brushes?
Unplug the machine. Remove the brush caps on each side with a screwdriver. Slide out the worn brushes and replace with identical ones (size: 5x8x15 mm). Reinstall caps and run the tool for 5 minutes to seat the brushes.
What is the maximum disc size I can use?
The recommended disc diameter is 200 mm (8 inches). Using larger discs may cause excessive vibration or overload the motor.
The polisher stopped working. What could be wrong?
Check if the power cord is plugged in. Inspect the carbon brushes; if worn, replace them. The thermal overload may have tripped; let the tool cool for 15 minutes. If the problem persists, contact Holzmann service.
Is the polisher double insulated?
Yes, the DSM 200PS is double insulated (Class II). This means it does not require an earth connection and provides additional protection against electric shock.
Where can I download the user manual?
You can download the manual for free from notice-facile.com or the official Holzmann website. The manual is available in PDF format in multiple languages.
User questions about DSM 200PS Holzmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual DSM 200PS - Holzmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSM 200PS by Holzmann.
USER MANUAL DSM 200PS Holzmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Holzmann
Model : DSM 200PS
Category : Polisher