SONAR 115 Xi - Speaker HK AUDIO - Free user manual and instructions
Find the device manual for free SONAR 115 Xi HK AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Passive speaker |
| Model | HK Audio SONAR 115 Xi |
| Category | PA speaker |
| Dimensions (W x H x D) | 450 x 700 x 420 mm |
| Weight | 28 kg |
| Power handling (RMS) | 400 W |
| Peak power | 800 W |
| Nominal impedance | 8 Ω |
| Frequency response | 55 Hz - 20 kHz |
| Sensitivity (1W/1m) | 98 dB |
| Woofer | 15 inch (385 mm) |
| Tweeter | 1 inch (25 mm) compression driver |
| Input connectors | 2 x Speakon NL4 |
| Enclosure material | Birch plywood |
| Protective grille | Perforated steel with acoustic foam |
| Main features | Portable PA, use on stage or installation |
| Maintenance and cleaning | Regular dusting with a dry cloth; avoid liquids |
| Safety | Do not expose to rain or moisture; use with adequate protection |
| Spare parts and repairability | Speakers and parts available via HK Audio authorized service |
| General information | Outdoor use possible with cover |
Frequently Asked Questions - SONAR 115 Xi HK AUDIO
What type of amplifier should I use with the SONAR 115 Xi?
Use a power amplifier capable of delivering between 400 and 800 W at 8 ohms per channel. A 500 W RMS amplifier is ideal for sufficient dynamic headroom.
Can I use this speaker outdoors?
Yes, but it is not waterproof. Install it sheltered from rain and moisture, or use a suitable protective cover.
How do I connect the speaker to the amplifier?
Use a Speakon NL4 cable. Connect one end to the amplifier output and the other to the speaker input. Observe polarity (pin 1+ and 1-).
What is the impedance of the SONAR 115 Xi?
The nominal impedance is 8 ohms. You can connect two speakers in parallel to a 4 ohm amplifier to achieve 4 ohms total.
Is the speaker bi-ampable?
No, the SONAR 115 Xi is a passive full-range speaker with a single input connector. The built-in passive crossover handles the woofer and tweeter.
How do I clean the speaker grille?
Remove the grille if possible (side screws) and dust with a brush or vacuum. Avoid chemicals. The foam can be washed with lukewarm water.
What type of cable should I use for connection?
Use a Speakon cable with sufficient gauge (2.5 mm² or larger) to avoid power loss. The maximum recommended length is 20 meters.
Can I use this speaker as a stage monitor?
Yes, the SONAR 115 Xi can be placed horizontally on its side to serve as a monitor. Ensure the speaker is aimed at the musician.
What should I do if the sound is distorted?
First, check that the amplifier is not clipping. Reduce the volume and ensure the total impedance is correct. If the problem persists, the speaker may be damaged.
Where can I find spare parts?
Contact an authorized HK Audio dealer or customer service. Replacement speakers and electronic components are available under HK Audio part numbers.
User questions about SONAR 115 Xi HK AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual SONAR 115 Xi - HK AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SONAR 115 Xi by HK AUDIO.
USER MANUAL SONAR 115 Xi HK AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HK AUDIO
Model : SONAR 115 Xi
Category : Speaker