DAIKIN

EWWD180J-SS - Air Conditioning DAIKIN - Free user manual and instructions

Find the device manual for free EWWD180J-SS DAIKIN in PDF.

📄 182 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DAIKIN EWWD180J-SS - page 10
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Water-cooled screw chiller (chiller)
Brand Daikin
Model EWWD180J-SS
Nominal cooling capacity Approximately 180 kW (depending on conditions)
Dimensions (L x W x H) Approximately 2500 x 1200 x 1600 mm
Net weight Approximately 1800 kg
Power supply 400 V three-phase, 50 Hz
Refrigerant R-134a or R-407C (depending on version)
Chilled water outlet temperature From 5 °C to 15 °C
Compressor Semi-hermetic screw
Main functions Water cooling for centralized air conditioning
Maintenance and cleaning Regularly clean filters and heat exchangers
Water circuit draining Before winter to prevent freezing
Maximum working pressure 10 bar (water side)
Safety protections Protection against overpressure, overcurrent, and high temperature
Sound level Approximately 75 dB(A) at 1 m
Hydraulic connections DN 125 (flanges)
Certifications Compliant with CE, PED, RoHS

Frequently Asked Questions - EWWD180J-SS DAIKIN

What is the cooling capacity of the Daikin EWWD180J-SS?
The nominal capacity is approximately 180 kW, but it varies depending on operating conditions (water temperature, outdoor temperature, etc.).
What type of refrigerant does the EWWD180J-SS use?
The model typically uses R-134a or R-407C. Check the device label for the exact fluid.
How to perform routine maintenance on this chiller?
Regularly clean filters and heat exchangers. Check pressures and refrigerant levels. Annual maintenance by a professional is recommended.
What is the required supply voltage?
The device requires a three-phase supply of 400 V / 50 Hz. Refer to the rating plate for exact power.
How to drain the water circuit before winter?
Close the shut-off valves, open the vents and drains. Ensure no water remains in the heat exchanger to prevent freezing. Use antifreeze if necessary.
What are the dimensions and weight of the EWWD180J-SS?
Approximate dimensions are 2500 x 1200 x 1600 mm and net weight is approximately 1800 kg.
Is it possible to connect multiple indoor units to this chiller?
Yes, the EWWD180J-SS is designed to supply a chilled water network. It can serve multiple units (fan coil units, AHUs, etc.) via a suitable hydraulic circuit.
What to do in case of water pressure fault?
Check that the shut-off valves are open, filters are clean, and there is no leak. If the fault persists, contact a certified technician.
Can this chiller be installed outdoors?
This unit is typically installed indoors or in a weather-protected technical room. It is not designed for direct exposure to the elements.
Where to find the complete user manual?
You can download the PDF manual for free from the website notice-facile.com by selecting your language.

User questions about EWWD180J-SS DAIKIN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air Conditioning in PDF format for free! Find your manual EWWD180J-SS - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWWD180J-SS by DAIKIN.

USER MANUAL EWWD180J-SS DAIKIN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DAIKIN

Model : EWWD180J-SS

Category : Air Conditioning