4802-1 - Uncategorized Hazet - Free user manual and instructions
Find the device manual for free 4802-1 Hazet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Torque Wrench |
| Brand | Hazet |
| Model | 4802-1 |
| Drive Size | 1/2 inch |
| Torque Range | 5 - 60 Nm |
| Accuracy | ±2% of set value |
| Scale Graduation | 0.1 Nm |
| Length | 350 mm |
| Weight | 0.8 kg |
| Material | Chrome-vanadium steel |
| Operation | Manual, click-type |
| Calibration | Factory calibrated, recommended annually |
| Storage | Store at lowest torque setting |
| Warranty | 2 years |
| Includes | Calibration certificate, plastic case |
Frequently Asked Questions - 4802-1 Hazet
How do I set the torque value on the Hazet 4802-1?
Turn the knurled handle to align the desired torque value on the scale. Always start from the lowest setting and increase gradually. Avoid over-torquing by not exceeding the maximum range.
What is the recommended calibration frequency?
Hazet recommends annual calibration to maintain accuracy. If the wrench is dropped or used above its range, recalibrate immediately.
Can the torque wrench be used for loosening bolts?
No, torque wrenches are designed for tightening only. Using them to loosen can damage the internal click mechanism.
How should I store the torque wrench?
Always store at the lowest torque setting (5 Nm) to relieve spring tension. Keep it in the provided case away from moisture and extreme temperatures.
What is the drive size of the 4802-1?
The Hazet 4802-1 has a 1/2 inch square drive, compatible with standard sockets and accessories.
Is the Hazet 4802-1 suitable for left-hand threads?
Yes, but ensure the wrench is set to the correct torque and applied consistently. The click mechanism works in both directions, though it is primarily designed for right-hand threads.
How accurate is the torque wrench?
The accuracy is ±2% of the set torque value in the clockwise direction, complying with DIN ISO 6789 standards.
What does the click sound indicate?
The click signals that the preset torque has been reached. Stop applying force immediately to avoid overtightening.
Can I replace the head or repair the tool?
The 4802-1 is a sealed unit. Only authorized Hazet service centers should perform repairs. Do not attempt to disassemble.
Does the wrench come with a calibration certificate?
Yes, each new Hazet 4802-1 includes a factory calibration certificate with traceable measurements.
User questions about 4802-1 Hazet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 4802-1 - Hazet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4802-1 by Hazet.
USER MANUAL 4802-1 Hazet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hazet
Model : 4802-1
Category : Uncategorized