RAC-WK0812ESCWRC - Air Conditioning TOSHIBA - Free user manual and instructions
Find the device manual for free RAC-WK0812ESCWRC TOSHIBA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted split air conditioner |
| Brand | Toshiba |
| Model | RAC-WK0812ESCWRC |
| Cooling Capacity | 3500 W (12000 BTU/h) |
| Heating Capacity | 3500 W (heat pump) |
| Power Supply | 230 V / 50 Hz |
| Power Consumption (cooling) | 1050 W |
| Power Consumption (heating) | 1100 W |
| Indoor Unit Dimensions (W x H x D) | 79.8 x 29.0 x 22.5 cm |
| Outdoor Unit Dimensions (W x H x D) | 70.0 x 53.0 x 28.0 cm |
| Indoor Unit Weight | 10.5 kg |
| Outdoor Unit Weight | 28.5 kg |
| Refrigerant | R32 |
| Energy Class (cooling) | A+ |
| Energy Class (heating) | A+ |
| Indoor Unit Noise Level | 22 - 42 dB(A) |
| Outdoor Unit Noise Level | 50 dB(A) |
| Main Functions | Cooling, heating, dehumidification, ventilation, auto mode, sleep mode, 24h timer |
| Maintenance and Cleaning | Clean air filters every 2 weeks; clean coils with a vacuum cleaner |
| Safety | Auto restart, frost protection, refrigerant leak detection (optional) |
| Spare Parts and Repairability | Air filters, remote control, electronic boards; repairability score 8/10 |
Frequently Asked Questions - RAC-WK0812ESCWRC TOSHIBA
How to clean the filters of my Toshiba RAC-WK0812ESCWRC air conditioner?
Turn off and unplug the unit. Open the front panel, remove the filters, wash them with lukewarm soapy water, dry them completely before reinstalling.
What to do if my air conditioner does not cool enough?
First check the filters (dirty), the set temperature, and that the outdoor unit is not obstructed. If the problem persists, contact a professional.
How to set the timer on the device?
Use the remote control: press the Timer button to set the stop or start time. Confirm with OK.
What is the power consumption of this air conditioner?
In cooling mode, it is about 1050 W. In heating, about 1100 W. Check the energy label for more details.
What does error code E0 on the display mean?
Error code E0 usually indicates a temperature sensor defect. Turn off the unit, wait a few minutes and turn it on again. If the code persists, contact customer service.
Can I use the air conditioner without the remote control?
Yes, there are emergency buttons on the indoor unit to turn on/off and change mode, but fine adjustments require the remote control.
How to switch from cool mode to heat mode?
On the remote control, press Mode until the sun symbol (heat) or snowflake (cool) appears. Make sure the heat pump is compatible.
What is the recommended installation height for the indoor unit?
The indoor unit should be installed at least 2.5 meters from the floor, with at least 15 cm of free space around for good air circulation.
How to reset the air conditioner to factory settings?
Unplug the unit for 10 seconds, then plug it back in. Alternatively, use the key combination Fan and Temp Down for 5 seconds.
The compressor is making a loud noise, is this normal?
A moderate hum is normal, but a metallic noise or clicking may indicate a problem. Check that the outdoor unit is level and not obstructed.
User questions about RAC-WK0812ESCWRC TOSHIBA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual RAC-WK0812ESCWRC - TOSHIBA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RAC-WK0812ESCWRC by TOSHIBA.
USER MANUAL RAC-WK0812ESCWRC TOSHIBA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOSHIBA
Model : RAC-WK0812ESCWRC
Category : Air Conditioning