Bristol - Fireplace Livn - Free user manual and instructions
Find the device manual for free Bristol Livn in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric fireplace |
| Brand | Livn |
| Model | Bristol |
| Dimensions (W × H × D) | 100 × 60 × 30 cm |
| Net weight | 15 kg |
| Maximum heating power | 2000 W |
| Power supply | 220-240 V ~ 50 Hz |
| Flame lighting type | LED 3D with ember effect |
| Number of heating levels | 2 (eco and comfort) |
| Thermostat adjustment range | 15 °C to 30 °C |
| Remote control | Yes, included |
| Programmable timer | Yes, from 1 to 8 hours |
| Frame material | Steel and tempered glass |
| Available color | Black or white |
| Routine maintenance | Clean the glass with a soft non-abrasive cloth |
| Safety | Automatic shut-off in case of overheating, cool front surface |
| Spare parts available | LED bulbs, fuses, remote control |
| Repairability index | 8 out of 10 |
| Warranty | 2 years |
| Certifications | CE, RoHS |
Frequently Asked Questions - Bristol Livn
How to install the Bristol fireplace?
Place the fireplace on a flat, stable surface, at least 50 cm from flammable objects. Plug it into a 220-240 V outlet. Make sure the main switch is in the off position before plugging in.
Does the flame work without heating?
Yes, you can use the flame effect alone, without activating the heating, for a decorative ambiance. Use the Flame button on the remote control or the panel.
How to adjust the temperature?
Use the + and - buttons to adjust the desired temperature. The range is 15 °C to 30 °C. The heating stops automatically when the room reaches the set temperature.
What to do if the remote control does not work?
Check that the batteries are installed correctly and are not discharged. Ensure that no obstacles block the signal between the remote and the receiver. If the problem persists, use the buttons on the control panel.
How to clean the fireplace glass?
Let the appliance cool down. Use a soft slightly damp cloth to wipe the glass. Do not use abrasive products or solvents. Avoid touching the LED bulbs.
Can the fireplace be recessed?
Yes, under certain conditions. Respect the minimum safety distances indicated in the manual. Ensure adequate ventilation to prevent overheating. Consult a professional for recessed installation.
Which fuses to use for replacement?
Use only fuses of type 5A/250V, as indicated in the manual. Always replace with a fuse of the same specifications. Disconnect the appliance before any intervention.
How to program the timer?
Press the Timer button. Select the desired operating duration (1 to 8 hours) with the + and - buttons. The appliance will turn off automatically after the chosen delay.
What to do in case of a burning smell during first use?
This is normal during first use. New components emit a slight odor that disappears after a few hours of operation. Ventilate the room. If the odor persists, stop the appliance and contact customer service.
How to replace an LED bulb?
Disconnect the appliance and let it cool down. Remove the rear panel or access grille depending on the model. Disconnect the defective bulb and replace it with an identical LED bulb (reference available in the manual). Reassemble the panel.
User questions about Bristol Livn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fireplace in PDF format for free! Find your manual Bristol - Livn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bristol by Livn.
USER MANUAL Bristol Livn
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Livn
Model : Bristol
Category : Fireplace