Access Glide FV1571 - Iron T-FAL - Free user manual and instructions
Find the device manual for free Access Glide FV1571 T-FAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Iron |
| Brand | T-Fal |
| Model | Access Glide FV1571 |
| Dimensions (L x W x H) | 30 x 15 x 20 cm |
| Weight | 1.5 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Power | 2400 W |
| Soleplate type | Durilium Glide |
| Water tank capacity | 300 ml |
| Continuous steam output | Up to 40 g/min |
| Vertical steam function | Yes |
| Anti-drip function | Yes |
| Self-cleaning function | Yes |
| Automatic shut-off | Yes (8 min vertical, 30 sec horizontal) |
| Cord | 2.5 m, 360° swivel |
| Care and cleaning | Use a water/vinegar mixture to descale |
| Spare parts and repairability | Tank, soleplate, buttons available separately |
| Warranty | 2 years |
Frequently Asked Questions - Access Glide FV1571 T-FAL
How to descale my T-Fal Access Glide FV1571 iron?
To descale, fill the tank with a mixture of half water and half white vinegar. Set the iron to maximum steam position and let it sit for a few minutes. Then use the self-cleaning function if available, or empty the tank and rinse with clear water.
How to use the vertical steam function?
Hold the iron vertically and press the steam button. Use the vertical steam to remove wrinkles from hanging clothes or curtains without placing them on the board.
What to do if the iron does not produce steam?
First check the water level in the tank. If the tank is empty, fill it. Ensure the iron is hot enough (ready indicator on). If the problem persists, use the self-cleaning function to remove limescale deposits.
How to prevent the iron from dripping?
The iron is equipped with the anti-drip function. Use it by selecting a temperature suitable for the fabric. Avoid ironing at low temperature with steam, as this can cause drips.
What type of water to use in the iron?
It is recommended to use tap water. If your water is very hard, mix it with demineralized water to reduce scale.
How to clean the iron's soleplate?
Let the iron cool down. Use a soft cloth soaked in white vinegar or a special soleplate cleaner. Never use abrasive. For stubborn stains, run the iron over a damp cloth.
What is the automatic shut-off for?
The automatic shut-off turns off the iron if it stays still for too long: 8 minutes in vertical position and 30 seconds in horizontal position. This prevents accidents and saves energy.
How to iron delicate fabrics?
For delicate fabrics like silk, use a low temperature and low steam flow. Iron on the reverse side of the garment or use a protective cloth. Avoid direct steam.
How to store the iron after use?
Empty the water tank, let the iron cool down. Wrap the cord around the base. Store the iron in an upright position, in a dry place.
Where to find spare parts for the FV1571?
Spare parts such as the tank, soleplate, or buttons are available from T-Fal customer service or on authorized spare parts websites. Use the model number FV1571 to search.
User questions about Access Glide FV1571 T-FAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual Access Glide FV1571 - T-FAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Access Glide FV1571 by T-FAL.
USER MANUAL Access Glide FV1571 T-FAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : T-FAL
Model : Access Glide FV1571
Category : Iron