TB200C - Lawn mower TROY-BILT - Free user manual and instructions
Find the device manual for free TB200C TROY-BILT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Self-propelled lawn mower |
| Brand | Troy-Bilt |
| Model | TB200C |
| Engine | Petrol, 4-stroke |
| Engine displacement | 200 cc |
| Starting | Manual (recoil start) |
| Cutting width | 53 cm (21 inches) |
| Cutting heights | Adjustable, 6 positions (25 mm to 89 mm) |
| Cutting system | Rotary steel blade |
| Chassis type | Stamped steel |
| Number of wheels | 4 |
| Wheel size | Rear: 28 cm (11\"), Front: 20 cm (8\") |
| Grass catcher | Capacity 68 L (semi-rigid bag) |
| Discharge functions | Rear, side or mulching (plug included) |
| Weight | Approximately 32 kg |
| Dimensions (L x W x H) | 150 x 56 x 107 cm |
| Noise level | 96 dB(A) (guaranteed) |
| Engine oil type | SAE 30 (quantity: 0.6 L) |
| Fuel type | Unleaded petrol 95 |
| Fuel tank capacity | 1.0 L |
| Routine maintenance | Clean after each use, oil change every 25 h, blade sharpening |
| Safety | Blade brake (automatic stop if release the bar) |
| Spare parts available | Blade, spark plug, air filter, belt |
| Warranty | 2 years parts and labor |
Frequently Asked Questions - TB200C TROY-BILT
How to start the Troy-Bilt TB200C lawn mower?
Make sure the fuel tank contains petrol and the engine oil is at the correct level. Set the throttle lever to 'Start', prime the bulb 3 times, then pull sharply on the starter cord while holding the safety bar down.
What type of oil to use and how to check it?
Use SAE 30 oil (for 4-stroke engines). Check the level with the dipstick, engine cold and level. Fill to the 'Full' mark without overfilling.
How to adjust the cutting height?
Operate the adjustment lever on each wheel (or a central lever depending on version). There are 6 positions: turn the lever to get the desired height (from 25 mm to 89 mm).
What to do if the blade no longer cuts properly?
Check that the blade is not dull or damaged. Sharpen it with a file or replace it with a new one. Also ensure the cutting deck is not clogged with debris.
How to maintain the air filter?
Clean the foam air filter every 25 hours of use. Wash it in soapy water, dry it, then saturate it with clean engine oil. Reinstall it after squeezing out excess oil.
What is the capacity of the grass catcher?
The grass catcher has a capacity of 68 liters. It is semi-rigid and attaches to the rear of the mower. Empty it regularly to avoid clogging.
How to switch from bagging mode to mulching mode?
Remove the grass catcher and insert the mulching plug (supplied) into the rear discharge opening. Lower the deflector flap if present. Mulching finely shreds the grass.
Why does the mower vibrate abnormally?
Excessive vibrations are often due to an unbalanced blade or loose blade. Stop the engine, disconnect the spark plug, then check the attachment and condition of the blade. Replace it if necessary.
How to store the mower in winter?
Drain the fuel tank or add a stabilizer. Clean the underside of the deck. Change the oil. Remove the spark plug and pour a spoonful of oil into the cylinder, then reinstall the spark plug. Store it in a dry place.
What to do if the engine does not start?
Check for petrol, the condition of the spark plug (cleaned or replaced), the oil level, and that the safety bar is fully depressed. Prime the bulb. If nothing works, consult a professional.
User questions about TB200C TROY-BILT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual TB200C - TROY-BILT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TB200C by TROY-BILT.
USER MANUAL TB200C TROY-BILT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TROY-BILT
Model : TB200C
Category : Lawn mower