TB310C - Lawn mower TROY-BILT - Free user manual and instructions
Find the device manual for free TB310C TROY-BILT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Lawn Mower |
| Brand | Troy-Bilt |
| Model | TB310C |
| Cutting Width | 53 cm (21 inches) |
| Adjustable Cutting Height | 6 positions (25-85 mm) |
| Engine Type | Briggs & Stratton 4-stroke |
| Displacement | 159 cc |
| Power | 3.5 kW (4.7 hp) |
| Fuel Type | Unleaded Gasoline |
| Fuel Tank Capacity | 1.2 L |
| Starting System | Manual Recoil Start |
| Discharge Direction | Rear or Side (mulching) |
| Collection System | 70 L Collection Bag |
| Mulching Function | Yes (mulching plug included) |
| Weight | 32 kg |
| Dimensions (L x W x H) | 160 x 56 x 105 cm |
| Wheels | 2 front wheels 15 cm, 2 rear wheels 20 cm |
| Maintenance | Clean after each use; oil change every 50 hours |
| Main Replacement Parts | Blade, belt, air filter, spark plug |
| Safety | Blade brake (engine stops when releasing handle) |
| Warranty | 2 years |
Frequently Asked Questions - TB310C TROY-BILT
How to start the Troy-Bilt TB310C lawn mower?
Make sure the tank has gasoline. Set the engine stop lever to 'START'. Pull firmly on the manual recoil starter until the engine starts. If the engine is cold, use the choke.
What type of engine oil to use?
Use SAE 30 quality oil (API SJ or higher). Check the oil level before each use with the dipstick.
How to adjust the cutting height?
Use the adjustment lever on each wheel or the central control to select one of 6 height positions (25 mm to 85 mm). Adjust according to grass length.
How to switch to mulching mode?
Remove the collection bag and insert the provided mulching plug into the discharge opening. The grass will then be finely chopped and redistributed onto the lawn.
Why is the mower not cutting properly?
Check that the blade is sharp and not damaged. Clean the underside of the deck to remove accumulated grass. Make sure the cutting height is not too low.
When should the oil be changed?
Perform the first oil change after 5 hours of use, then every 50 hours or once per season. Drain when the engine is warm for easier flow.
How to clean the air filter?
Remove the air filter cover, take out the foam element. Wash it in soapy water, rinse, air dry, then lightly soak with clean engine oil before reinstalling.
The mower vibrates abnormally, what to do?
Check that the blade is balanced and not bent. Tighten the blade mounting bolt. Also inspect the wheels and wheel mounts.
Where to find spare parts for the TB310C?
Replacement parts (blade, belt, filter, spark plug) are available at authorized Troy-Bilt dealers or on specialized websites. Use the model number TB310C.
How to store the mower in winter?
Drain the fuel tank (or add stabilizer). Clean the mower, oil the cables, remove the spark plug and pour a spoonful of oil into the cylinder. Store in a dry place.
User questions about TB310C TROY-BILT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual TB310C - TROY-BILT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TB310C by TROY-BILT.
USER MANUAL TB310C TROY-BILT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TROY-BILT
Model : TB310C
Category : Lawn mower